Attachment 252311 Details for Bug 242902 – 2.6.23.1-42.fc8 dmesg

2.6.23.1-42.fc8 dmesg

dmesg (text/plain), 32.87 KB, created by Robert Spanton on 2007-11-09 02:03:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Robert Spanton

Created: 2007-11-09 02:03:35 UTC

Size: 32.87 KB

patch

obsolete

>Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000004f690000 (usable)
> BIOS-e820: 000000004f690000 - 000000004f69b000 (ACPI data)
> BIOS-e820: 000000004f69b000 - 000000004f700000 (ACPI NVS)
> BIOS-e820: 000000004f700000 - 0000000050000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>374MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f76f0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 325264) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   325264
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   325264
>On node 0 totalpages: 325264
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 749 pages used for memmap
>  HighMem zone: 95139 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F7660, 0014 (r0 PTLTD )
>ACPI: RSDT 4F696086, 0040 (r1 PTLTD  Capell00  6040000  LTP        0)
>ACPI: FACP 4F69AE20, 0074 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: DSDT 4F696C94, 418C (r1 INTEL  CALISTGA  6040000 INTL 20050624)
>ACPI: FACS 4F69BFC0, 0040
>ACPI: APIC 4F69AE94, 0068 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: HPET 4F69AEFC, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: MCFG 4F69AF34, 003C (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: APIC 4F69AF70, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT 4F69AFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SSDT 4F6960C6, 04F6 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 60000000 (gap: 50000000:90000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
>swsusp: Registered nosave memory region: 00000000000dc000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 00000000000e8000
>swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 322723
>Kernel command line: ro root=/dev/vg00_prefect/root_prefect rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1828.907 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1280816k/1301056k available (2183k kernel code, 19072k reserved, 1117k data, 280k init, 383552k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0621f7d - 0xc0739544   (1117 kB)
>      .text : 0xc0400000 - 0xc0621f7d   (2183 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3660.78 BogoMIPS (lpj=1830391)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3657.52 BogoMIPS (lpj=1828763)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 06
>Total of 2 processors activated (7318.30 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  0:30:07  Date: 11/09/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent variable MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: EC: Look up EC in DSDT
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: If "acpi_osi=Linux" works better,
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>ACPI: Power Resource [FN00] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: d4000000-d5ffffff
>  PREFETCH window: d0000000-d1ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 6, cardbus bridge: 0000:05:09.0
>  IO window: 00003000-000030ff
>  IO window: 00003400-000034ff
>  PREFETCH window: 60000000-63ffffff
>  MEM window: 64000000-67ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: d8000000-d80fffff
>  PREFETCH window: 60000000-63ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 20 (level, low) -> IRQ 18
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3575k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1194568207.561:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 230FF4508E76ABC1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Fan [FAN0] (off)
>ACPI: SSDT 4F6969BA, 0251 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 4F6965BC, 0379 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 4F696C0B, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 4F696935, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ00] (60 C)
>ACPI: Thermal Zone [TZ01] (60 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:05:09.0 [144d:c504]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 18
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xd80fffff
>pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:180:506
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 849k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd8444000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: AT Translated Set 2 keyboard as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: ATA-6: HTS541010G9AT00, MBZOA60A, max UDMA/100
>ata1.00: 180468192 sectors, multi 16: LBA48 
>ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC02, max UDMA/33
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      HTS541010G9AT00  MBZO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D SC02 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1194568213.034:2): selinux=0 auid=4294967295
>Clocksource tsc unstable (delta = -205935328 ns)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>ACPI: Battery Slot [BAT1] (battery present)
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>input: Video Bus as /class/input/input7
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>iTCO_vendor_support: vendor-support=0
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>intel_rng: FWH not detected
>sdhci: SDHCI controller found at 0000:05:09.2 [1180:0822] (rev 18)
>PCI: Enabling device 0000:05:09.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:05:09.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:05:09.2 to 64
>mmc0: SDHCI at 0xd8002800 irq 22 DMA
>PCI: Enabling device 0000:05:09.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:05:09.1[B] -> GSI 21 (level, low) -> IRQ 23
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>firewire_ohci: Added fw-ohci device 0000:05:09.1, OHCI version 1.0
>firewire_ohci:     Isochronous I/O is not yet implemented for OHCI 1.0 chips.
>firewire_ohci:     Cameras, audio devices etc. won't work on this controller with this driver version.
>PCI: Enabling device 0000:05:05.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 22 (level, low) -> IRQ 22
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ssb: Sonics Silicon Backplane found on PCI device 0000:05:05.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:13:77:27:f1:fa
>net eth1: device_rename: sysfs_create_symlink failed (-17)
>udev: renamed network interface wlan0 to eth1
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/mapper/vg00_prefect-swap_prefect.  Priority:-1 extents:1 across:2031608k
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>eth0: no IPv6 routers present
>eth0: no IPv6 routers present
>b44: eth0: Link is down.
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:90:d0:e7:65:91
>eth1: RX authentication from 00:90:d0:e7:65:91 (alg=0 transaction=2 status=0)
>eth1: authenticated
>eth1: associate with AP 00:90:d0:e7:65:91
>eth1: RX AssocResp from 00:90:d0:e7:65:91 (capab=0x11 status=0 aid=2)
>eth1: associated
>eth1: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>eth1: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>eth1: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>eth1: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting port
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting port
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:90:d0:e7:65:91
>eth1: RX authentication from 00:90:d0:e7:65:91 (alg=0 transaction=2 status=0)
>eth1: authenticated
>eth1: associate with AP 00:90:d0:e7:65:91
>eth1: RX AssocResp from 00:90:d0:e7:65:91 (capab=0x11 status=0 aid=2)
>eth1: associated
>eth1: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>eth1: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>eth1: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>eth1: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>eth1: disassociate(reason=3)
>eth1: disassociate(reason=3)
>eth1: RX disassociation from 00:90:d0:e7:65:91 (reason=7)
>eth1: RX disassociation from 00:90:d0:e7:65:91 (reason=7)
>epiphany[9458]: segfault at b2b86cb4 eip 089e7949 esp b0ffc300 error 4
>eth1: associate with AP 00:90:d0:e7:65:91
>eth1: RX ReassocResp from 00:90:d0:e7:65:91 (capab=0x11 status=0 aid=2)
>eth1: associated
>eth1: disassociate(reason=3)
>eth1: RX disassociation from 00:90:d0:e7:65:91 (reason=7)
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:90:d0:e7:65:91
>eth1: RX authentication from 00:90:d0:e7:65:91 (alg=0 transaction=2 status=0)
>eth1: authenticated
>eth1: associate with AP 00:90:d0:e7:65:91
>eth1: RX ReassocResp from 00:90:d0:e7:65:91 (capab=0x11 status=0 aid=2)
>eth1: associated
>eth1: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>eth1: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>eth1: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>eth1: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting port
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting port
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting port
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting port
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting port
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: Host Protected Area detected:
>	current size: 180468192 sectors
>	native size: 195371568 sectors
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 180468192 512-byte hardware sectors (92400 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Actions: View

Attachments on bug 242902: 156339 | 159891 | 196591 | 220391 | 243811 | 252311 | 287351 | 290234 | 293049 | 295618 | 297436 | 308918 | 319462