Attachment 253231 Details for Bug 224284 – dmesg output for 2.6.18-8.1.15.el5PAE

dmesg output for 2.6.18-8.1.15.el5PAE

dmesg-2.6.18-8.1.15.el5PAE.txt (text/plain), 27.56 KB, created by Jason Edgecombe on 2007-11-09 18:41:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jason Edgecombe

Created: 2007-11-09 18:41:56 UTC

Size: 27.56 KB

patch

obsolete

>Linux version 2.6.18-8.1.15.el5PAE (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Thu Oct 4 04:19:55 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bfe2fc00 (usable)
> BIOS-e820: 00000000bfe2fc00 - 00000000bfe31c00 (ACPI NVS)
> BIOS-e820: 00000000bfe33c00 - 00000000bfe73c00 (reserved)
> BIOS-e820: 00000000bfe73c00 - 00000000bfe75c00 (ACPI data)
> BIOS-e820: 00000000bfe75c00 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
>4160MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>NX (Execute Disable) protection: active
>On node 0 totalpages: 1294336
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 1064960 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v002 DELL                                  ) @ 0x000febf0
>ACPI: XSDT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd20d
>ACPI: FADT (v003 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd325
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 0x20050624) @ 0xfff6c6f0
>ACPI: MADT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd419
>ACPI: BOOT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd4ab
>ACPI: ASF! (v032 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd4d3
>ACPI: MCFG (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd565
>ACPI: HPET (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd5a3
>ACPI: SSDT (v001 DpgPmm  Cpu0Ist 0x00000011 INTL 0x20050624) @ 0xbfe2fc40
>ACPI: SSDT (v001 DpgPmm  Cpu1Ist 0x00000011 INTL 0x20050624) @ 0xbfe30049
>ACPI: SSDT (v001 DpgPmm    CpuPm 0x00000010 INTL 0x20050624) @ 0xbfe30452
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 0x20050624) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
>Detected 2658.132 MHz processor.
>Built 1 zonelists.  Total pages: 1294336
>Kernel command line: ro root=/dev/VolGroup00/root
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0735000 soft=c0715000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 4078108k/5177344k available (2040k kernel code, 47552k reserved, 841k data, 232k init, 3209404k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 5318.94 BogoMIPS (lpj=2659474)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Core(TM)2 CPU          6700  @ 2.66GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0736000 soft=c0716000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5316.10 BogoMIPS (lpj=2658050)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6700  @ 2.66GHz stepping 06
>Total of 2 processors activated (10635.04 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=15
>checking if image is initramfs... it is
>Freeing initrd memory: 2262k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x800-0x85f could not be reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff has been reserved
>pnp: 00:09: ioport range 0x100-0x1fe has been reserved
>pnp: 00:09: ioport range 0x200-0x277 has been reserved
>pnp: 00:09: ioport range 0x280-0x2e7 has been reserved
>pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved
>pnp: 00:09: ioport range 0x300-0x377 has been reserved
>pnp: 00:09: ioport range 0x380-0x3bb has been reserved
>pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved
>pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: dfd00000-dfefffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: dfc00000-dfcfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: dfb00000-dfbfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1194630995.844:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key F7CA8FDBEAFEBC9C
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 965Q Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0<6>Time: tsc clocksource has been installed.
> S3 S4 S5)
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 382k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000ff20
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 209, io base 0x0000ff00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 217, io base 0x0000ff80
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000ff60
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000ff40
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 233, io mem 0xdfffbc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 217, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEC0 irq 50
>ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEC8 irq 50
>scsi0 : ata_piix
>usb 5-2: new low speed USB device using uhci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>input: HID 0757:0203 as /class/input/input0
>input: USB HID v1.00 Keyboard [HID 0757:0203] on usb-0000:00:1d.2-2
>input: HID 0757:0203 as /class/input/input1
>input: USB HID v1.00 Mouse [HID 0757:0203] on usb-0000:00:1d.2-2
>ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 8
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>ata2.00: ATAPI, max UDMA/33
>ata2.00: configured for UDMA/33
>  Vendor: ATA       Model: WDC WD2500JS-75N  Rev: 10.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: TSSTcorp  Model: DVD+-RW TS-H553A  Rev: DE04
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata3: SATA max UDMA/133 cmd 0xFE40 ctl 0xFE52 bmdma 0xFED0 irq 50
>ata4: SATA max UDMA/133 cmd 0xFE60 ctl 0xFE72 bmdma 0xFED8 irq 50
>scsi2 : ata_piix
>ata3: port is slow to respond, this delay is known to occur on vacant SATA ports
>ata3: port failed to respond (30 secs)
>ata3: SRST failed (status 0xFF)
>ata3: SRST failed (err_mask=0x100)
>ata3: softreset failed, retrying in 5 secs
>ata3: SRST failed (status 0xFF)
>ata3: SRST failed (err_mask=0x100)
>ata3: softreset failed, retrying in 5 secs
>ata3: SRST failed (status 0xFF)
>ata3: SRST failed (err_mask=0x100)
>ata3: reset failed, giving up
>scsi3 : ata_piix
>ata4: port is slow to respond, this delay is known to occur on vacant SATA ports
>ata4: port failed to respond (30 secs)
>ata4: SRST failed (status 0xFF)
>ata4: SRST failed (err_mask=0x100)
>ata4: softreset failed, retrying in 5 secs
>ata4: SRST failed (status 0xFF)
>ata4: SRST failed (err_mask=0x100)
>ata4: softreset failed, retrying in 5 secs
>ata4: SRST failed (status 0xFF)
>ata4: SRST failed (err_mask=0x100)
>ata4: reset failed, giving up
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1194631090.054:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1587 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49762 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1194631090.275:3): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input2
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Floppy drive(s): fd0 is 1.44M
>tg3.c:v3.65-rh (November 20, 2006)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000BaseT Ethernet 00:18:8b:26:b8:1a
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 50
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>Adding 4194296k swap on /dev/VolGroup00/swap0.  Priority:-1 extents:1 across:4194296k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100406, writing 100006)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1194631634.092:4): avc:  denied  { rename } for  pid=2131 comm="mv" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.093:5): avc:  denied  { write } for  pid=2132 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.093:6): avc:  denied  { write } for  pid=2132 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.093:7): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.093:8): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.110:9): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.110:10): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.110:11): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.110:12): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.111:13): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.111:14): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.111:15): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>audit(1194631634.111:16): avc:  denied  { append } for  pid=2077 comm="dhclient-script" name="ntp.conf" dev=dm-0 ino=6588241 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
>eth0: no IPv6 routers present
>audit(1194631709.246:17): audit_pid=2267 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>libafs: no version for "struct_module" found: kernel tainted.
>libafs: module license 'http://www.openafs.org/dl/license10.html' taints kernel.
>Found system call table at 0xc05ff500 (pattern scan)
>Address 0xc05ff500 is not writable.
>System call hooks will not be installed; proceeding anyway
>Starting AFS cache scan...found 1260 non-empty cache files (40%).
>SELinux: initialized (dev afs, type afs), uses genfs_contexts
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining

Actions: View

Attachments on bug 224284: 155192 | 253231