Attachment 253971 Details for Bug 374731 – Dmesg from 2.6.23.1-21.fc7

Dmesg from 2.6.23.1-21.fc7

dmesg.txt (text/plain), 22.45 KB, created by Sam Varshavchik on 2007-11-10 15:31:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sam Varshavchik

Created: 2007-11-10 15:31:38 UTC

Size: 22.45 KB

patch

obsolete

>Linux version 2.6.23.1-21.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Thu Nov 1 21:09:24 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
> BIOS-e820: 000000007ffc0000 - 000000007ffcf000 (ACPI data)
> BIOS-e820: 000000007ffcf000 - 0000000080000000 (ACPI NVS)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524224) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524224
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524224
>On node 0 totalpages: 524224
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292545 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F7200, 0014 (r0 ACPIAM)
>ACPI: RSDT 7FFC0000, 0038 (r1 A M I  OEMRSDT   8000531 MSFT       97)
>ACPI: FACP 7FFC0200, 0084 (r2 A M I  OEMFACP   8000531 MSFT       97)
>ACPI: DSDT 7FFC0430, 8F54 (r1  0AAAA 0AAAA000        0 INTL  2002026)
>ACPI: FACS 7FFCF000, 0040
>ACPI: APIC 7FFC0390, 0054 (r1 A M I  OEMAPIC   8000531 MSFT       97)
>ACPI: MCFG 7FFC03F0, 003C (r1 A M I  OEMMCFG   8000531 MSFT       97)
>ACPI: OEMB 7FFCF040, 0040 (r1 A M I  AMI_OEM   8000531 MSFT       97)
>ACPI: SSDT 7FFC9390, 02B7 (r1    AMI   CPU1PM        1 INTL  2002026)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ed14000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 520129
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a5000 soft=c0785000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2128.071 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2071152k/2096896k available (2175k kernel code, 24492k reserved, 1114k data, 280k init, 1179392k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073c000 - 0xc0782000   ( 280 kB)
>      .data : 0xc061fcc5 - 0xc0736544   (1114 kB)
>      .text : 0xc0400000 - 0xc061fcc5   (2175 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4258.14 BogoMIPS (lpj=2129070)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f3ff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) M processor 2.13GHz stepping 08
>Total of 1 processors activated (4258.14 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 10:16:02  Date: 11/10/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
>ACPI: Power Resource [GFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:06: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>pnp: 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
>pnp: 00:06: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:07: ioport range 0x25c-0x25d has been reserved
>pnp: 00:07: iomem range 0xfec00000-0xfecfffff has been reserved
>pnp: 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
>pnp: 00:09: iomem range 0xff780000-0xffbfffff could not be reserved
>pnp: 00:09: iomem range 0xffb80000-0xffffffff could not be reserved
>pnp: 00:0a: iomem range 0xffc00000-0x1ffb7ffff could not be reserved
>pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fa900000-fe9fffff
>  PREFETCH window: bfe00000-dfefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 4, cardbus bridge: 0000:03:01.0
>  IO window: 0000d000-0000d0ff
>  IO window: 0000d400-0000d4ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 94000000-97ffffff
>PCI: Bus 5, cardbus bridge: 0000:03:01.1
>  IO window: 0000dc00-0000dcff
>  IO window: 00001000-000010ff
>  PREFETCH window: 8c000000-8fffffff
>  MEM window: 98000000-9bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: 88000000-91ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2813k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1194689762.377:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F78B1579A6D2C17
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FN00] to D3
>ACPI: Transitioning device [FN00] to D3
>ACPI: Fan [FN00] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (66 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:03:01.0 [1043:1888]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 17
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
>cs: IO port probe 0xd000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfea00000 - 0xfeafffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x91ffffff
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>Yenta: CardBus bridge found at 0000:03:01.1 [1043:1888]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 18
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #05 to #08
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
>cs: IO port probe 0xd000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfea00000 - 0xfeafffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x91ffffff
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>Clocksource tsc unstable (delta = -483784157 ns)
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:559:274
>  hash matches device tty11
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebfbc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>usb 1-2: device not accepting address 2, error -71
>ata1.00: ATA-7: Hitachi HTS541210H9AT00, HPBOA23C, max UDMA/100
>ata1.00: 195371568 sectors, multi 16: LBA48 
>ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L532U, AS04, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>usb 5-2: new high speed USB device using ehci_hcd and address 2
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54121 HPBO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 5-2: configuration #1 chosen from 1 choice
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 4 ports detected
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L532U AS04 PQ: 0 ANSI: 5
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 3 ports detected
>usb 2-1.1: new full speed USB device using uhci_hcd and address 3
>usb 2-1.1: configuration #1 chosen from 1 choice
>usb 2-1.2: new full speed USB device using uhci_hcd and address 4
>usb 2-1.2: configuration #1 chosen from 1 choice
>input: Broadcom Corp BCM92045DG-Flash_UHE as /class/input/input3
>input: USB HID v1.11 Keyboard [Broadcom Corp BCM92045DG-Flash_UHE] on usb-0000:00:1d.1-1.2
>usb 2-1.3: new full speed USB device using uhci_hcd and address 5
>usb 2-1.3: configuration #1 chosen from 1 choice
>input: Broadcom Corp BCM92045DG-Flash_UHE as /class/input/input4
>input: USB HID v1.11 Mouse [Broadcom Corp BCM92045DG-Flash_UHE] on usb-0000:00:1d.1-1.3
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1194689768.371:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x41f 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x41f 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ieee80211_crypt: registered algorithm 'NULL'
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>skge 1.11 addr 0xfeafc000 irq 16 chip Yukon-Lite rev 9
>skge eth0: addr 00:17:31:2c:16:f2
>asus-laptop: Asus Laptop Support version 0.42
>asus-laptop:   M7V model detected
>Registered led device: asus:mail
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>intel_rng: FWH not detected
>ACPI: AC Adapter [AC0] (on-line)
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input9
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 22 (level, low) -> IRQ 21
>ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
>ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
>ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 19 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:03:01.2, OHCI version 1.0
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>floppy0: no floppy controllers found
>ACPI: \_SB_.PCI0.IDE0.CHN1.DRV0: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.CHN1.DRV0: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.CHN1.DRV0] Added
>ACPI: \_SB_.PCI0.IDE0.CHN1.DRV1: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.CHN1.DRV1: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.CHN1.DRV1] Added
>ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0: found ejectable bay
>ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE1.CHN1.DRV0] Added
>ACPI: \_SB_.PCI0.IDE1.CHN1.DRV1: found ejectable bay
>ACPI: \_SB_.PCI0.IDE1.CHN1.DRV1: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE1.CHN1.DRV1] Added
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda4, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 506036k swap on /dev/sda3.  Priority:-1 extents:1 across:506036k
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>usb 2-1.2: USB disconnect, address 4
>usb 2-1.3: USB disconnect, address 5
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>ieee80211_crypt: registered algorithm 'CCMP'
>ieee80211_crypt: registered algorithm 'TKIP'
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 374731: 253951 | 253961 | 253971