Attachment 260301 Details for Bug 385361 – dmesg output from installation of openSUSE 10.3

dmesg output from installation of openSUSE 10.3

dmesg.txt (text/plain), 36.57 KB, created by Tarek Allam on 2007-11-15 19:36:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tarek Allam

Created: 2007-11-15 19:36:12 UTC

Size: 36.57 KB

patch

obsolete

>Following is my dmesg output:
>
>Linux version 2.6.22.12-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/11/06 23:05:18 UTC
>Command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD3200JB-00_WD-WCAMR2316417-part2 vga=0x31a resume=/dev/sda1 splash=silent
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007bef0000 (usable)
> BIOS-e820: 000000007bef0000 - 000000007bef3000 (ACPI NVS)
> BIOS-e820: 000000007bef3000 - 000000007bf00000 (ACPI data)
> BIOS-e820: 000000007c000000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 507632) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F7680, 0014 (r0 HP-CPC)
>ACPI: RSDT 7BEF3040, 0034 (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7BEF30C0, 0074 (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7BEF3180, 6F9C (r1 HP-CPC AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7BEF0000, 0040
>ACPI: SSDT 7BEFA240, 0206 (r1 HP-CPC POWERNOW        1  LTP        1)
>ACPI: MCFG 7BEFA4C0, 003C (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7BEFA180, 007C (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007bef0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 507632) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007bef0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   507632
>On node 0 totalpages: 507535
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1271 pages reserved
>  DMA zone: 2672 pages, LIFO batch:0
>  DMA32 zone: 6884 pages used for memmap
>  DMA32 zone: 496652 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 50296 bytes of per cpu data
>Built 1 zonelists.  Total pages: 499324
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD3200JB-00_WD-WCAMR2316417-part2 vga=0x31a resume=/dev/sda1 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2204.623 MHz processor.
>Console: colour dummy device 80x25
>Checking aperture...
>CPU 0: aperture @ 40d0000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 1992684k/2030528k available (2053k kernel code, 37456k reserved, 1018k data, 316k init)
>Calibrating delay using timer specific routine.. 4413.03 BogoMIPS (lpj=8826073)
>Security Framework v1.0.0 initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 4383k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1351 Objects with 105 Devices 338 Methods 46 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>Using local APIC timer interrupts.
>result 12526270
>Detected 12.526 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4415.27 BogoMIPS (lpj=8830541)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>Brought up 2 CPUs
>migration_cost=273
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: No mmconfig possible on device 00:18
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime GPEs in this block
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:....................................................................................................
>Initialized 41/46 Regions 9/9 Fields 32/32 Buffers 18/27 Packages (1368 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:...
>Executed 3 _INI methods requiring 1 _STA executions (examined 110 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>ACPI: RTC can wake from S4
>pnp: 00:01: ioport range 0x4000-0x407f has been reserved
>pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
>pnp: 00:01: ioport range 0x4400-0x447f has been reserved
>pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
>pnp: 00:01: ioport range 0x4800-0x487f has been reserved
>pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
>pnp: 00:01: ioport range 0x2000-0x207f has been reserved
>pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
>pnp: 00:01: iomem range 0x7c000000-0x7fffffff could not be reserved
>pnp: 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:0a: iomem range 0xcec00-0xcffff has been reserved
>pnp: 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: b000-bfff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdb00000-fdbfffff
>PCI: Bridge: 0000:00:04.0
>  IO window: 9000-9fff
>  MEM window: fda00000-fdafffff
>  PREFETCH window: fd900000-fd9fffff
>PCI: Bridge: 0000:00:10.0
>  IO window: a000-afff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>Time: acpi_pm clocksource has been installed.
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1194942958.652:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:05.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie03]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie03]
>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004b80000, using 10240k, total 65536k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 98233 bytes
>bootsplash: ...found (1280x1024, 35219 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>NET: Registered protocol family 1
>Freeing unused kernel memory: 316k freed
>ACPI: Thermal Zone [THRM] (40 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_amd 0000:00:0d.0: version 0.3.8
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f400 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f408 irq 15
>ata1.00: ATA-6: WDC WD3200JB-00KFA0, 08.05J08, max UDMA/100
>ata1.00: 625142448 sectors, multi 1: LBA48 
>ata1.01: ATA-6: WDC WD2000JB-00GVA0, 08.02D08, max UDMA/100
>ata1.01: 390721968 sectors, multi 1: LBA48 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>ata2.00: ATAPI: HL-DT-STDVDRRW GSA-H20L, S742, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200JB-00K 08.0 PQ: 0 ANSI: 5
>scsi 0:0:1:0: Direct-Access     ATA      WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRRW GSA-H20L  S742 PQ: 0 ANSI: 5
>sata_nv 0000:00:0e.0: version 3.4
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 23
>ata4: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 23
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: ATA-7: SAMSUNG SP2504C, VT100-49, max UDMA7
>ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 310)
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001cc00 irq 22
>ata6: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001cc08 irq 22
>ata5: SATA link down (SStatus 0 SControl 310)
>ata6: SATA link down (SStatus 0 SControl 310)
>ACPI: Fan [FAN] (on)
>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfe02f000
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.12-0.1-default ohci_hcd
>usb usb1: SerialNumber: 0000:00:0b.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:1:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 20, io mem 0xfe02e000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.12-0.1-default ehci_hcd
>usb usb2: SerialNumber: 0000:00:0b.1
>usb usb2: configuration #1 chosen from 1 choice
>sd 0:0:1:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:<6>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
> sdb1
> sdb1: <bsd: sdb5 sdb6 sdb7 sdb8 sdb9 >
>sd 0:0:1:0: [sdb] Attached SCSI disk
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 2:0:0:0: [sdc] Attached SCSI disk
>swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 2-8: new high speed USB device using ehci_hcd and address 4
>usb 2-8: new device found, idVendor=0bda, idProduct=0111
>usb 2-8: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-8: Product: USB2.0-CRW
>usb 2-8: Manufacturer: Generic
>usb 2-8: SerialNumber: 20021111153705700
>usb 2-8: configuration #1 chosen from 1 choice
>usb 1-1: new full speed USB device using ohci_hcd and address 2
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:04 failed with error -16
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>Initializing USB Mass Storage driver...
>nvidia: module license 'NVIDIA' taints kernel.
>eth0: forcedeth.c: subsystem: 0103c:2a34 bound to 0000:00:14.0
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:2337:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2341:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2349:    inputs: mic=0x18, fmic=0x19, line=0x1c, fline=0x1a, cd=0x0, aux=0x0
>ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:03:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[fddff000-fddff7ff]  Max Packet=[1024]  IR/IT contexts=[8/8]
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000f2851f]
>usb 1-1: new device found, idVendor=03f0, idProduct=0401
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: HP ScanJet 5200C
>usb 1-1: Manufacturer: Hewlett-Packard
>usb 1-1: SerialNumber: SG924131MSHT
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-4: new full speed USB device using ohci_hcd and address 3
>usb 1-4: new device found, idVendor=0403, idProduct=6001
>usb 1-4: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-4: Product: USBSERIALCONVERTER
>usb 1-4: Manufacturer: FIDI
>usb 1-4: SerialNumber: FTCDL9UA
>usb 1-4: configuration #1 chosen from 1 choice
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
>ftdi_sio 1-4:1.0: FTDI USB Serial Device converter detected
>drivers/usb/serial/ftdi_sio.c: Detected FT232BM
>usb 1-4: FTDI USB Serial Device converter now attached to ttyUSB0
>usbcore: registered new interface driver ftdi_sio
>drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
>Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1 across:2104472k
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
>sd 6:0:0:0: [sdd] Attached SCSI removable disk
>sd 6:0:0:0: Attached scsi generic sg4 type 0
>scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
>sd 6:0:0:1: [sde] Attached SCSI removable disk
>sd 6:0:0:1: Attached scsi generic sg5 type 0
>scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
>sd 6:0:0:2: [sdf] Attached SCSI removable disk
>sd 6:0:0:2: Attached scsi generic sg6 type 0
>scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
>sd 6:0:0:3: [sdg] Attached SCSI removable disk
>sd 6:0:0:3: Attached scsi generic sg7 type 0
>usb-storage: device scan complete
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>AppArmor: AppArmor initialized
>audit(1194942973.264:2):  type=1505 info="AppArmor initialized" pid=2264
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>NET: Registered protocol family 17
>audit(1194960989.353:3): audit_backlog_limit=320 old=64 by auid=4294967295 res=1
>audit(1194960989.365:4): audit_pid=3737 old=0 by auid=4294967295
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=235 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=215 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=246 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=226 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=235 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=215 
>eth0: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:18:f3:a5:83:27:00:a0:c5:e4:96:00:08:00 SRC=208.181.59.253 DST=192.168.0.3 LEN=40 TOS=0x00 PREC=0x00 TTL=37 ID=0 PROTO=TCP SPT=80 DPT=28093 WINDOW=0 RES=0x00 ACK RST URGP=0 
>SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:18:f3:a5:83:27:00:a0:c5:e4:96:00:08:00 SRC=208.181.59.253 DST=192.168.0.3 LEN=40 TOS=0x00 PREC=0x00 TTL=37 ID=0 PROTO=TCP SPT=80 DPT=28093 WINDOW=0 RES=0x00 ACK RST URGP=0 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=64.233.163.107 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=29299 DF PROTO=TCP SPT=10821 DPT=80 WINDOW=66 RES=0x00 ACK FIN URGP=0 OPT (0101080A000308BE47851D40) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=64.233.163.19 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=45067 DF PROTO=TCP SPT=21419 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A000308BE4779CEFF) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=64.233.167.99 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56027 DF PROTO=TCP SPT=5239 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A000308BE46E7DE47) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=64.233.163.19 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=18465 DF PROTO=TCP SPT=21427 DPT=80 WINDOW=769 RES=0x00 ACK FIN URGP=0 OPT (0101080A000308BE477F2468) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=64.233.167.99 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=25307 DF PROTO=TCP SPT=5241 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A000308BEC531611C) 
>SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:18:f3:a5:83:27:00:a0:c5:e4:96:00:08:00 SRC=64.233.163.107 DST=192.168.0.3 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=0 DF PROTO=TCP SPT=80 DPT=10821 WINDOW=0 RES=0x00 RST URGP=0 
>SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:18:f3:a5:83:27:00:a0:c5:e4:96:00:08:00 SRC=64.233.163.19 DST=192.168.0.3 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=0 DF PROTO=TCP SPT=80 DPT=21419 WINDOW=0 RES=0x00 RST URGP=0 
>SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:18:f3:a5:83:27:00:a0:c5:e4:96:00:08:00 SRC=64.233.163.19 DST=192.168.0.3 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=0 DF PROTO=TCP SPT=80 DPT=21427 WINDOW=0 RES=0x00 RST URGP=0 
>SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:18:f3:a5:83:27:00:a0:c5:e4:96:00:08:00 SRC=64.233.167.99 DST=192.168.0.3 LEN=40 TOS=0x00 PREC=0x00 TTL=242 ID=0 DF PROTO=TCP SPT=80 DPT=5239 WINDOW=0 RES=0x00 RST URGP=0 
>SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:18:f3:a5:83:27:00:a0:c5:e4:96:00:08:00 SRC=64.233.167.99 DST=192.168.0.3 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=10031 DF PROTO=TCP SPT=80 DPT=5241 WINDOW=0 RES=0x00 RST URGP=0 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=64.233.163.107 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=29306 DF PROTO=TCP SPT=10821 DPT=80 WINDOW=66 RES=0x00 ACK FIN URGP=0 OPT (0101080A000329FB47851D40) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=64.233.163.107 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=29307 DF PROTO=TCP SPT=10821 DPT=80 WINDOW=66 RES=0x00 ACK FIN URGP=0 OPT (0101080A00034B7B47851D40) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=64.233.167.99 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56035 DF PROTO=TCP SPT=5239 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A00034C7A46E7DE47) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=63.236.73.208 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39077 DF PROTO=TCP SPT=24566 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0011016F11BAC94A) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=63.236.73.208 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=9190 DF PROTO=TCP SPT=24567 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0011016F11BAC94A) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=209.211.201.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27084 DF PROTO=TCP SPT=8422 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A0011016F4F3AF86F) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=72.14.203.104 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=7278 DF PROTO=TCP SPT=7054 DPT=80 WINDOW=63 RES=0x00 ACK RST URGP=0 OPT (0101080A0011016F7E3E39A0) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=209.211.201.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27085 DF PROTO=TCP SPT=8422 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A001101A64F3AF86F) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=209.211.201.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27091 DF PROTO=TCP SPT=8422 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00111CB84F3AF86F) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=209.211.201.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27092 DF PROTO=TCP SPT=8422 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A001138384F3AF86F) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=63.236.73.208 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39085 DF PROTO=TCP SPT=24566 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00113F3111BAC94A) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=63.236.73.208 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63088 DF PROTO=TCP SPT=15965 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A005849E411BEC448) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=72.14.203.104 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=5399 DF PROTO=TCP SPT=4259 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A005849E448899601) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=63.236.73.208 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=28140 DF PROTO=TCP SPT=15966 DPT=80 WINDOW=262 RES=0x00 ACK FIN URGP=0 OPT (0101080A005849E411BEC448) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=63.236.73.208 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=7491 DF PROTO=TCP SPT=15971 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A005849E411BEBE7B) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=63.236.73.208 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=7492 DF PROTO=TCP SPT=15971 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00584A2211BEBE7B) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=63.236.73.208 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=7498 DF PROTO=TCP SPT=15971 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A005868A711BEBE7B) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=63.236.73.208 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=7499 DF PROTO=TCP SPT=15971 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A005887A711BEBE7B) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=72.14.203.104 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=5406 DF PROTO=TCP SPT=4259 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A005887E848899601) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.3 DST=72.14.203.104 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=5407 DF PROTO=TCP SPT=4259 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A0058C66848899601) 
>usb 2-7: new high speed USB device using ehci_hcd and address 5
>usb 2-7: new device found, idVendor=0a16, idProduct=2004
>usb 2-7: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-7: Product: Store 'n' Go
>usb 2-7: Manufacturer: Verbatim
>usb 2-7: SerialNumber: 31419332d1916c
>usb 2-7: configuration #1 chosen from 1 choice
>scsi7 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>scsi 7:0:0:0: Direct-Access     Verbatim Store 'n' Go     1.00 PQ: 0 ANSI: 2
>sd 7:0:0:0: [sdh] 1974271 512-byte hardware sectors (1011 MB)
>sd 7:0:0:0: [sdh] Write Protect is off
>sd 7:0:0:0: [sdh] Mode Sense: 00 00 00 00
>sd 7:0:0:0: [sdh] Assuming drive cache: write through
>sd 7:0:0:0: [sdh] 1974271 512-byte hardware sectors (1011 MB)
>sd 7:0:0:0: [sdh] Write Protect is off
>sd 7:0:0:0: [sdh] Mode Sense: 00 00 00 00
>sd 7:0:0:0: [sdh] Assuming drive cache: write through
> sdh: sdh1
>sd 7:0:0:0: [sdh] Attached SCSI removable disk
>sd 7:0:0:0: Attached scsi generic sg8 type 0
>usb-storage: device scan complete
>usb 2-7: USB disconnect, address 5
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:a0:d1:58:02:45:08:00 SRC=192.168.0.2 DST=224.0.0.251 LEN=103 TOS=0x00 PREC=0x00 TTL=255 ID=9409 PROTO=UDP SPT=5353 DPT=5353 LEN=83 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:a0:d1:58:02:45:08:00 SRC=192.168.0.2 DST=224.0.0.251 LEN=90 TOS=0x00 PREC=0x00 TTL=255 ID=9410 PROTO=UDP SPT=5353 DPT=5353 LEN=70 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:a0:d1:58:02:45:08:00 SRC=192.168.0.2 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=9411 PROTO=UDP SPT=5353 DPT=5353 LEN=54 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:a0:d1:58:02:45:08:00 SRC=192.168.0.2 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=9412 PROTO=UDP SPT=5353 DPT=5353 LEN=54 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:a0:d1:58:02:45:08:00 SRC=192.168.0.2 DST=224.0.0.251 LEN=68 TOS=0x00 PREC=0x00 TTL=255 ID=9413 PROTO=UDP SPT=5353 DPT=5353 LEN=48 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:a0:d1:58:02:45:08:00 SRC=192.168.0.2 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=9610 PROTO=UDP SPT=5353 DPT=5353 LEN=54

Actions: View

Attachments on bug 385361: 260301