Attachment 260891 Details for Bug 242956 – dmesg output

dmesg output

dmesg.out (text/plain), 30.78 KB, created by Paul Bickerstaff on 2007-11-16 08:28:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paul Bickerstaff

Created: 2007-11-16 08:28:56 UTC

Size: 30.78 KB

patch

obsolete

>Linux version 2.6.21-2950.fc8xen (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-32)) #1 SMP Tue Oct 23 12:23:33 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 0000000076082000 (usable)
>Entering add_active_range(0, 0, 483458) 0 entries of 256 used
>end_pfn_map = 483458
>DMI 2.3 present.
>Entering add_active_range(0, 0, 483458) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->   483458
>  DMA32      483458 ->   483458
>  Normal     483458 ->   483458
>early_node_map[1] active PFN ranges
>    0:        0 ->   483458
>On node 0 totalpages: 483458
>  DMA zone: 6609 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 476849 pages, LIFO batch:31
>  DMA32 zone: 0 pages used for memmap
>  Normal zone: 0 pages used for memmap
>ACPI: RSDP 000F7D30, 0014 (r0 Nvidia)
>ACPI: RSDT 7FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FFF3180, 6678 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FFF0000, 0040
>ACPI: SRAT 7FFF9900, 00A0 (r1 AMD    HAMMER          1 AMD         1)
>ACPI: MCFG 7FFF9A00, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FFF9840, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>PERCPU: Allocating 26496 bytes of per cpu data
>Built 1 zonelists.  Total pages: 476849
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 2211.380 MHz processor.
>Console: colour VGA+ 80x50
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Software IO TLB enabled: 
> Aperture:     2 megabytes
> Kernel range: ffff8800034d3000 - ffff8800036d3000
> Address size: 25 bits
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 1871360k/1933832k available (2265k kernel code, 53632k reserved, 1351k data, 200k init)
>Calibrating delay using timer specific routine.. 4424.82 BogoMIPS (lpj=2212411)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>SMP alternatives: switching to SMP code
>Brought up 2 CPUs
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>Initializing CPU#1
>migration_cost=393
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:09.0
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x4000-0x407f has been reserved
>pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
>pnp: 00:01: ioport range 0x4400-0x447f has been reserved
>pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
>pnp: 00:01: ioport range 0x4800-0x487f has been reserved
>pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
>pnp: 00:01: iomem range 0x0-0x0 could not be reserved
>pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0e: iomem range 0xf0000-0xf3fff could not be reserved
>pnp: 00:0e: iomem range 0xf4000-0xf7fff could not be reserved
>pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: 9000-afff
>  MEM window: d0000000-d1ffffff
>  PREFETCH window: 88000000-880fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0e.0
>  IO window: disabled.
>  MEM window: c8000000-cfffffff
>  PREFETCH window: c0000000-c7ffffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 9487k freed
>audit: initializing netlink socket (disabled)
>audit(1195194263.714:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /class/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input1
>ACPI: Power Button (CM) [PWRB]
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (40 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input2
>Xen virtual console successfully installed as xvc0
>Event-channel device installed.
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input3
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 200k freed
>Write protecting the kernel read-only data: 981k
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 22, io mem 0xd2004000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>libata version 2.20 loaded.
>sata_nv 0000:00:07.0: version 3.3
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:07.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ata1: SATA max UDMA/133 cmd 0xffffc2000001c480 ctl 0xffffc2000001c4a0 bmdma 0x000000000001d800 irq 21
>ata2: SATA max UDMA/133 cmd 0xffffc2000001c580 ctl 0xffffc2000001c5a0 bmdma 0x000000000001d808 irq 21
>scsi0 : sata_nv
>input: ImPS/2 Generic Wheel Mouse as /class/input/input4
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
>ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
>ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
>ata1.00: configured for UDMA/133
>scsi1 : sata_nv
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ata_hpa_resize 1: sectors = 488395055, hpa_sectors = 488397168
>ata2.00: Host Protected Area detected:
>	current size: 488395055 sectors
>	native size: 488397168 sectors
>ata2.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
>ata2.00: 488395055 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata2.00: ata_hpa_resize 1: sectors = 488395055, hpa_sectors = 488397168
>ata2.00: Host Protected Area detected:
>	current size: 488395055 sectors
>	native size: 488397168 sectors
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
>ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
>ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 1:0:0:0: [sdb] 488395055 512-byte hardware sectors (250058 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 488395055 512-byte hardware sectors (250058 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>sata_nv 0000:00:08.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>ata3: SATA max UDMA/133 cmd 0xffffc2000001e480 ctl 0xffffc2000001e4a0 bmdma 0x000000000001c400 irq 20
>ata4: SATA max UDMA/133 cmd 0xffffc2000001e580 ctl 0xffffc2000001e5a0 bmdma 0x000000000001c408 irq 20
>scsi2 : sata_nv
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
>ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
>ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
>ata3.00: configured for UDMA/133
>scsi3 : sata_nv
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
>ata4.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
>ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
>ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
>ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 3:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:0:0: [sdd] Attached SCSI disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>sata_sil 0000:05:0a.0: version 2.1
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
>sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
>ata5: SATA max UDMA/100 cmd 0xffffc20000020080 ctl 0xffffc2000002008a bmdma 0xffffc20000020000 irq 19
>ata6: SATA max UDMA/100 cmd 0xffffc200000200c0 ctl 0xffffc200000200ca bmdma 0xffffc20000020008 irq 19
>ata7: SATA max UDMA/100 cmd 0xffffc20000020280 ctl 0xffffc2000002028a bmdma 0xffffc20000020200 irq 19
>ata8: SATA max UDMA/100 cmd 0xffffc200000202c0 ctl 0xffffc200000202ca bmdma 0xffffc20000020208 irq 19
>scsi4 : sata_sil
>ata5: SATA link down (SStatus 0 SControl 310)
>scsi5 : sata_sil
>ata6: SATA link down (SStatus 0 SControl 310)
>scsi6 : sata_sil
>ata7: SATA link down (SStatus 0 SControl 310)
>scsi7 : sata_sil
>ata8: SATA link down (SStatus 0 SControl 310)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  8 users, 11 roles, 2352 types, 112 bools, 1 sens, 1024 cats
>security:  67 classes, 211269 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1195194275.150:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>pata_amd 0000:00:06.0: version 0.2.8
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ata9: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
>ata10: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
>scsi8 : pata_amd
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>EDAC MC: Ver: 2.0.1 Oct 23 2007
>ata9.00: ATAPI, max UDMA/66
>input: PC Speaker as /class/input/input5
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 502kHz
>ata9.00: configured for UDMA/66
>scsi9 : pata_amd
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>Loading module: rt2500pci - 2.0.1 by http://rt2x00.serialmonkey.com.
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ATA: abnormal status 0x8 on port 0x0000000000010177
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>scsi 8:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-111D 1.19 PQ: 0 ANSI: 5
>scsi 8:0:0:0: Attached scsi generic sg4 type 5
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>skge 1.10 addr 0xd1004000 irq 17 chip Yukon-Lite rev 9
>skge eth0: addr 00:13:d4:53:ef:ce
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 8:0:0:0: Attached scsi CD-ROM sr0
>intel8x0_measure_ac97_clock: measured 50428 usecs
>intel8x0: clocking to 46849
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
>ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>wmaster0: Selected rate control algorithm 'simple'
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdc1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>Adding 8388600k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:8388600k
>Adding 8388600k swap on /dev/mapper/VolGroup00-LogVol02.  Priority:-2 extents:1 across:8388600k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>audit(1195194294.361:3): avc:  denied  { read write } for  pid=1661 comm="modprobe" name="[7202]" dev=sockfs ino=7202 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:iptables_t:s0 tclass=rawip_socket
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:11:f5:10:c2:1b
>wlan0: RX authentication from 00:11:f5:10:c2:1b (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:11:f5:10:c2:1b
>wlan0: RX AssocResp from 00:11:f5:10:c2:1b (capab=0x401 status=0 aid=5)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: duplicate address detected!
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>Bridge firewalling registered
>virbr0: no IPv6 routers present
>skge eth0: disabling interface
>skge peth0: enabling interface
>ADDRCONF(NETDEV_UP): peth0: link is not ready
>skge peth0: Link is up at 1000 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
>device peth0 entered promiscuous mode
>audit(1195194329.732:4): dev=peth0 prom=256 old_prom=0 auid=4294967295
>eth0: port 1(peth0) entering learning state
>eth0: topology change detected, propagating
>eth0: port 1(peth0) entering forwarding state
>audit(1195194335.945:5): avc:  denied  { getattr } for  pid=3197 comm="gdm-binary" name="/" dev=sdc1 ino=2 scontext=system_u:system_r:xdm_t:s0-s0:c0.c1023 tcontext=system_u:object_r:boot_t:s0 tclass=dir
>peth0: no IPv6 routers present
>eth0: no IPv6 routers present
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 80
>Buffer I/O error on device sr0, logical block 10
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 80
>Buffer I/O error on device sr0, logical block 10
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 72
>Buffer I/O error on device sr0, logical block 9
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 88
>Buffer I/O error on device sr0, logical block 11
>Buffer I/O error on device sr0, logical block 12
>Buffer I/O error on device sr0, logical block 13
>Buffer I/O error on device sr0, logical block 14
>Buffer I/O error on device sr0, logical block 15
>Buffer I/O error on device sr0, logical block 16
>Buffer I/O error on device sr0, logical block 17
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 72
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 72
>ISO 9660 Extensions: Microsoft Joliet Level 3
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 116
>ISOFS: unable to read i-node block
>ISOFS: changing to secondary root
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 1612
>ISOFS: unable to read i-node block
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 80
>printk: 8 messages suppressed.
>Buffer I/O error on device sr0, logical block 10
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 80
>Buffer I/O error on device sr0, logical block 10
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 72
>Buffer I/O error on device sr0, logical block 9
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 88
>Buffer I/O error on device sr0, logical block 11
>Buffer I/O error on device sr0, logical block 12
>Buffer I/O error on device sr0, logical block 13
>Buffer I/O error on device sr0, logical block 14
>Buffer I/O error on device sr0, logical block 15
>Buffer I/O error on device sr0, logical block 16
>Buffer I/O error on device sr0, logical block 17
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 72
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 72
>ISO 9660 Extensions: Microsoft Joliet Level 3
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 116
>ISOFS: unable to read i-node block
>ISOFS: changing to secondary root
>sr 8:0:0:0: SCSI error: return code = 0x08000002
>sr 8:0:0:0: Sense Key : Hardware Error [current] 
>sr 8:0:0:0: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
>end_request: I/O error, dev sr0, sector 1612
>ISOFS: unable to read i-node block
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts

Actions: View

Attachments on bug 242956: 203171 | 203501 | 203511 | 203521 | 260881 | 260891 | 260901 | 262671 | 262681 | 262691