Attachment 262531 Details for Bug 254661 – mattg: 'dmesg' output

mattg: 'dmesg' output

d (text/plain), 28.91 KB, created by mattg on 2007-11-17 22:33:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mattg

Created: 2007-11-17 22:33:27 UTC

Size: 28.91 KB

patch

obsolete

>Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 21:41:26 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
> BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007e58f000 (usable)
> BIOS-e820: 000000007e58f000 - 000000007e59c000 (reserved)
> BIOS-e820: 000000007e59c000 - 000000007e63d000 (usable)
> BIOS-e820: 000000007e63d000 - 000000007e6ef000 (ACPI NVS)
> BIOS-e820: 000000007e6ef000 - 000000007e6f2000 (usable)
> BIOS-e820: 000000007e6f2000 - 000000007e6ff000 (ACPI data)
> BIOS-e820: 000000007e6ff000 - 000000007e700000 (usable)
> BIOS-e820: 000000007e700000 - 000000007f000000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>1127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe200
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 517888) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   517888
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   517888
>On node 0 totalpages: 517888
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2254 pages used for memmap
>  HighMem zone: 286258 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FE020, 0014 (r0 INTEL )
>ACPI: RSDT 7E6FD038, 003C (r1 INTEL  DG965WH       6AD       1000013)
>ACPI: FACP 7E6FC000, 0074 (r1 INTEL  DG965WH       6AD MSFT  1000013)
>ACPI: DSDT 7E6F7000, 41AA (r1 INTEL  DG965WH       6AD MSFT  1000013)
>ACPI: FACS 7E697000, 0040
>ACPI: APIC 7E6F6000, 0078 (r1 INTEL  DG965WH       6AD MSFT  1000013)
>ACPI: WDDT 7E6F5000, 0040 (r1 INTEL  DG965WH       6AD MSFT  1000013)
>ACPI: MCFG 7E6F4000, 003C (r1 INTEL  DG965WH       6AD MSFT  1000013)
>ACPI: ASF! 7E6F3000, 00A6 (r32 INTEL  DG965WH       6AD MSFT  1000013)
>ACPI: HPET 7E6F2000, 0038 (r1 INTEL  DG965WH       6AD MSFT  1000013)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000)
>swsusp: Registered nosave memory region: 000000000008f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 513842
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2397.675 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2044916k/2071552k available (2184k kernel code, 24456k reserved, 1116k data, 280k init, 1153232k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622165 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622165   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4797.89 BogoMIPS (lpj=2398945)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4795.20 BogoMIPS (lpj=2397601)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>Total of 2 processors activated (9593.09 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:58:35  Date: 11/17/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
>pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>pnp: 00:06: ioport range 0x500-0x53f has been reserved
>pnp: 00:06: ioport range 0x400-0x47f has been reserved
>pnp: 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: 2000-2fff
>  MEM window: 94100000-941fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: 94000000-940fffff
>  PREFETCH window: 90000000-93ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2925k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1195336715.404:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key D5E5FC8EDCF186B6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965G Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0x80000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:977:1005
>  hash matches device 00:07
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 845k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x94325c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0x94325800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 17, io base 0x000030c0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003080
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.3
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 cmd 0xf8830100 ctl 0x00000000 bmdma 0x00000000 irq 218
>ata2: SATA max UDMA/133 cmd 0xf8830180 ctl 0x00000000 bmdma 0x00000000 irq 218
>ata3: SATA max UDMA/133 cmd 0xf8830200 ctl 0x00000000 bmdma 0x00000000 irq 218
>ata4: SATA max UDMA/133 cmd 0xf8830280 ctl 0x00000000 bmdma 0x00000000 irq 218
>ata5: SATA max UDMA/133 cmd 0xf8830300 ctl 0x00000000 bmdma 0x00000000 irq 218
>ata6: SATA max UDMA/133 cmd 0xf8830380 ctl 0x00000000 bmdma 0x00000000 irq 218
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata5.00: configured for UDMA/133
>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata6.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: unknown partition table
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: unknown partition table
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: unknown partition table
>sd 3:0:0:0: [sdd] Attached SCSI disk
>scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
>sd 4:0:0:0: [sde] Write Protect is off
>sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
>sd 4:0:0:0: [sde] Write Protect is off
>sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: unknown partition table
>sd 4:0:0:0: [sde] Attached SCSI disk
>scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 5:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sdf] Write Protect is off
>sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sdf] Write Protect is off
>sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdf: unknown partition table
>sd 5:0:0:0: [sdf] Attached SCSI disk
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>scsi6 : pata_marvell
>scsi7 : pata_marvell
>ata7: PATA max UDMA/100 cmd 0x00012018 ctl 0x00012026 bmdma 0x00012000 irq 16
>ata8: DUMMY
>BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 
>ata7.00: ATAPI: LITE-ON DVDRW LH-20A1P, KL05, max UDMA/66
>ata7.00: limited to UDMA/33 due to 40-wire cable
>ata7.00: configured for UDMA/33
>scsi 6:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1P   KL05 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1195336727.186:2): selinux=0 auid=4294967295
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 4:0:0:0: Attached scsi generic sg4 type 0
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>sr 6:0:0:0: Attached scsi generic sg6 type 5
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [SLPB]
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>input: PC Speaker as /class/input/input5
>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:6a:7a:97
>iTCO_vendor_support: vendor-support=0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>Linux video capture interface: v2.00
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ivtv:  Start initialization, version 1.0.0
>firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.10
>ivtv0: Initializing card #0
>ivtv0: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>net eth1: device_rename: sysfs_create_symlink failed (-17)
>udev: renamed network interface eth0 to eth1
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
>ivtv0: Did you put the firmware in the hotplug firmware directory?
>ivtv0: Retry loading firmware
>ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
>ivtv0: Did you put the firmware in the hotplug firmware directory?
>ivtv0: Error initializing firmware
>ivtv0: Error -19 on initialization
>ivtv:  End initialization
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>eth0: RTL8169sb/8110sb at 0xf8a84800, 00:e0:4c:09:c7:8a, XID 10000000 IRQ 21
>md: md0 stopped.
>md: bind<sdc>
>md: bind<sdd>
>md: bind<sde>
>md: bind<sdf>
>md: bind<sdb>
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  8784.000 MB/sec
>xor: using function: pIII_sse (8784.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int32x1    878 MB/s
>raid6: int32x2    976 MB/s
>raid6: int32x4    894 MB/s
>raid6: int32x8    804 MB/s
>raid6: mmxx1     3121 MB/s
>raid6: mmxx2     3535 MB/s
>raid6: sse1x1    2136 MB/s
>raid6: sse1x2    2750 MB/s
>raid6: sse2x1    3984 MB/s
>raid6: sse2x2    4664 MB/s
>raid6: using algorithm sse2x2 (4664 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>raid5: device sdb operational as raid disk 0
>raid5: device sdf operational as raid disk 4
>raid5: device sde operational as raid disk 3
>raid5: device sdd operational as raid disk 2
>raid5: device sdc operational as raid disk 1
>raid5: allocated 5252kB for md0
>raid5: raid level 5 set md0 active with 5 out of 5 devices, algorithm 2
>RAID5 conf printout:
> --- rd:5 wd:5
> disk 0, o:1, dev:sdb
> disk 1, o:1, dev:sdc
> disk 2, o:1, dev:sdd
> disk 3, o:1, dev:sde
> disk 4, o:1, dev:sdf
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>net dev18114: device_rename: sysfs_create_symlink failed (-17)
>net eth0: device_rename: sysfs_create_symlink failed (-17)
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
>net eth1: device_rename: sysfs_create_symlink failed (-17)
>r8169: eth1: link up
>r8169: eth1: link up
>audit(1195336750.087:3): audit_pid=2055 old=0 by auid=4294967295
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0

Actions: View

Attachments on bug 254661: 211801 | 211841 | 211851 | 262531 | 262551 | 291871 | 291872