Attachment 265681 Details for Bug 393551 – dmesg output

dmesg output

dmesg.txt (text/plain), 29.94 KB, created by Steve Bardsley on 2007-11-21 02:57:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Steve Bardsley

Created: 2007-11-21 02:57:57 UTC

Size: 29.94 KB

patch

obsolete

>Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 21:41:26 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
> BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
> BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
> BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
> BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f3f50
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524016) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524016
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524016
>On node 0 totalpages: 524016
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292339 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7F20, 0014 (r0 XFX68L)
>ACPI: RSDT 7FEF3040, 0038 (r1 XFX68L NVDAACPI 42302E31 NVDA        0)
>ACPI: FACP 7FEF30C0, 0074 (r1 XFX68L NVDAACPI 42302E31 NVDA        0)
>ACPI: DSDT 7FEF3180, 5271 (r1 XFX68L NVDAACPI     1000 MSFT  3000000)
>ACPI: FACS 7FEF0000, 0040
>ACPI: HPET 7FEF8540, 0038 (r1 XFX68L NVDAACPI 42302E31 NVDA       98)
>ACPI: WDRT 7FEF85C0, 0047 (r1 XFX68L NVDAACPI 42302E31 NVDA        0)
>ACPI: MCFG 7FEF8680, 003C (r1 XFX68L NVDAACPI 42302E31 NVDA        0)
>ACPI: APIC 7FEF8440, 0098 (r1 XFX68L NVDAACPI 42302E31 NVDA        0)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:50100000)
>swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000
>swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 519923
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet libata.pata_dma=1
>Unknown boot option `libata.pata_dma=1': ignoring
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3000.037 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2069492k/2096064k available (2184k kernel code, 25308k reserved, 1116k data, 280k init, 1178560k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622165 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622165   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 6004.65 BogoMIPS (lpj=3002329)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000e49d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5999.85 BogoMIPS (lpj=2999929)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000e49d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
>Total of 2 processors activated (12004.51 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  2:28:28  Date: 11/21/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfa860, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:0f.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AMA1] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AMAC] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AACI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AMCI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [ASMB] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AUS2] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AIDE] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:00: ioport range 0x1000-0x107f has been reserved
>pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:00: ioport range 0x1400-0x147f has been reserved
>pnp: 00:00: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:00: ioport range 0x1800-0x187f has been reserved
>pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0c: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:0c: iomem range 0xd5800-0xd7fff has been reserved
>pnp: 00:0c: iomem range 0xf0000-0xfbfff could not be reserved
>pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:03.0
>  IO window: 9000-9fff
>  MEM window: ca000000-cdffffff
>  PREFETCH window: b0000000-bfffffff
>PCI: Bridge: 0000:00:0f.0
>  IO window: disabled.
>  MEM window: cfe00000-cfefffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 3586k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1195612107.752:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key D5E5FC8EDCF186B6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfeff0000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:742:460
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 845k
>ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [AUS2] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 16, io mem 0xcfffe000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [AUBA] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 17, io mem 0xcffff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>usb 1-8: new high speed USB device using ehci_hcd and address 2
>libata version 2.21 loaded.
>sata_nv 0000:00:0e.0: version 3.5
>ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [ASA0] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001d800 irq 18
>ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001d808 irq 18
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>usb 1-8: configuration #1 chosen from 1 choice
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
>ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [ASA1] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:0e.1 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001c400 irq 19
>ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001c408 irq 19
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0e.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0e.2 to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x0001c000 ctl 0x0001bc02 bmdma 0x0001b000 irq 16
>ata6: SATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b402 bmdma 0x0001b008 irq 16
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-7: ST3400820AS, 3.AAD, max UDMA/133
>ata5.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata5.00: configured for UDMA/133
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 4:0:0:0: Direct-Access     ATA      ST3400820AS      3.AA PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 4:0:0:0: [sdc] Attached SCSI disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>pata_amd 0000:00:0d.0: version 0.3.9
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi6 : pata_amd
>scsi7 : pata_amd
>ata7: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ec00 irq 14
>ata8: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ec08 irq 15
>ata7.00: ATAPI: Optiarc DVD RW AD-7190A, 1.01, max UDMA/66
>ata7.00: configured for UDMA/66
>ata8: port disabled. ignoring.
>scsi 6:0:0:0: CD-ROM            Optiarc  DVD RW AD-7190A  1.01 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1195612120.515:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>scsi 6:0:0:0: Attached scsi generic sg3 type 5
>sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /class/input/input3
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [AMA1] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>forcedeth: using HIGHDMA
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>nvidia: module license 'NVIDIA' taints kernel.
>eth0: forcedeth.c: subsystem: 010de:c55e bound to 0000:00:12.0
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:02:07.0 to 64
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0xf400
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf000
>firewire_ohci: Added fw-ohci device 0000:02:07.0, OHCI version 1.10
>ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [AXV5] -> GSI 16 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:0f.1 to 64
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>usbcore: registered new interface driver snd-usb-audio
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>usb-storage: device scan complete
>scsi 8:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9339 PQ: 0 ANSI: 0
>scsi 8:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9339 PQ: 0 ANSI: 0
>scsi 8:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9339 PQ: 0 ANSI: 0
>scsi 8:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9339 PQ: 0 ANSI: 0
>sd 8:0:0:0: [sdd] Attached SCSI removable disk
>sd 8:0:0:0: Attached scsi generic sg4 type 0
>sd 8:0:0:1: [sde] Attached SCSI removable disk
>sd 8:0:0:1: Attached scsi generic sg5 type 0
>sd 8:0:0:2: [sdf] Attached SCSI removable disk
>sd 8:0:0:2: Attached scsi generic sg6 type 0
>sd 8:0:0:3: [sdg] Attached SCSI removable disk
>sd 8:0:0:3: Attached scsi generic sg7 type 0
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1195612137.710:3): audit_pid=2076 old=0 by auid=4294967295
>eth0: no IPv6 routers present
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>virbr0: no IPv6 routers present
>NVRM: Xid (0001:00): 16, Head 00000000 Count 000053e6
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/66
>ata7: EH complete
>NVRM: Xid (0001:00): 16, Head 00000000 Count 000053e7
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/66
>ata7: EH complete
>NVRM: Xid (0001:00): 16, Head 00000000 Count 000053e8
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/66
>ata7: EH complete
>NVRM: Xid (0001:00): 16, Head 00000000 Count 000053e9
>NVRM: Xid (0001:00): 16, Head 00000000 Count 000053ea
>ata7.00: limiting speed to UDMA/44:PIO4
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/44
>ata7: EH complete
>NVRM: Xid (0001:00): 16, Head 00000000 Count 000053eb
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/44
>ata7: EH complete
>NVRM: Xid (0001:00): 16, Head 00000000 Count 000053ec
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/44
>ata7: EH complete
>sr 6:0:0:0: ioctl_internal_command return code = 8000002
>   : Sense Key : Aborted Command [current] [descriptor]
>   : Add. Sense: No additional sense information
>NVRM: Xid (0001:00): 16, Head 00000000 Count 000053ed
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/44
>ata7: EH complete
>ata7.00: limiting speed to UDMA/33:PIO4
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for UDMA/33
>ata7: EH complete
>ata7.00: limiting speed to PIO4
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata7.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7: soft resetting port
>ata7.00: configured for PIO4
>ata7: EH complete

Actions: View

Attachments on bug 393551: 265681 | 265691