Attachment 267771 Details for Bug 397191 – dmesg output

dmesg output

dmesg.out (text/plain), 28.41 KB, created by Robert Weiler on 2007-11-23 19:25:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Robert Weiler

Created: 2007-11-23 19:25:48 UTC

Size: 28.41 KB

patch

obsolete

>Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 22:14:09 EST 2007
>Command line: ro root=LABEL=/12 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000d7fb0000 (usable)
> BIOS-e820: 00000000d7fb0000 - 00000000d7fc0000 (ACPI data)
> BIOS-e820: 00000000d7fc0000 - 00000000d7ff0000 (ACPI NVS)
> BIOS-e820: 00000000d7ff0000 - 00000000d8000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000124000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 884656) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1196032) 2 entries of 3200 used
>end_pfn_map = 1196032
>DMI 2.3 present.
>ACPI: RSDP 000FA7C0, 0014 (r0 ACPIAM)
>ACPI: RSDT D7FB0000, 0030 (r1 A M I  OEMRSDT  10000506 MSFT       97)
>ACPI: FACP D7FB0200, 0081 (r1 A M I  OEMFACP  10000506 MSFT       97)
>ACPI: DSDT D7FB03F0, 3A3E (r1  A0036 A0036001        1 MSFT  100000D)
>ACPI: FACS D7FC0000, 0040
>ACPI: APIC D7FB0390, 0052 (r1 A M I  OEMAPIC  10000506 MSFT       97)
>ACPI: OEMB D7FC0040, 003F (r1 A M I  OEMBIOS  10000506 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>CPU has 2 num_cores
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000124000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 884656) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1196032) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000124000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1196032
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   884656
>    0:  1048576 ->  1196032
>On node 0 totalpages: 1032015
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1319 pages reserved
>  DMA zone: 2624 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 866280 pages, LIFO batch:31
>  Normal zone: 2016 pages used for memmap
>  Normal zone: 145440 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000d7fb0000 - 00000000d7fc0000
>swsusp: Registered nosave memory region: 00000000d7fc0000 - 00000000d7ff0000
>swsusp: Registered nosave memory region: 00000000d7ff0000 - 00000000d8000000
>swsusp: Registered nosave memory region: 00000000d8000000 - 00000000ff780000
>swsusp: Registered nosave memory region: 00000000ff780000 - 0000000100000000
>Allocating PCI resources starting at dc000000 (gap: d8000000:27780000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 1014344
>Policy zone: Normal
>Kernel command line: ro root=LABEL=/12 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2202.808 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x4850000 - 0x8850000
>Memory: 3995916k/4784128k available (2442k kernel code, 132144k reserved, 1381k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4408.89 BogoMIPS (lpj=2204449)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12515978
>Detected 12.515 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4405.35 BogoMIPS (lpj=2202679)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2080 bytes
>Time:  9:40:02  Date: 11/23/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI: enabled onboard AC97/MC97 devices
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  6F, should be 64 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 64M @ 0xdc000000
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 32-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:07: ioport range 0x680-0x6ff has been reserved
>pnp: 00:07: ioport range 0x290-0x297 has been reserved
>pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0c: iomem range 0xc0000-0xdffff has been reserved
>pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0c: iomem range 0x100000-0xd7feffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f9f00000-fbffffff
>  PREFETCH window: e0000000-f8ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3225k freed
>audit: initializing netlink socket (disabled)
>audit(1195810801.520:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key AC8B348BB0168498
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>  Magic number: 15:843:677
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9e00000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_via 0000:00:0f.1: version 0.3.2
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15
>usb 1-2: configuration #1 chosen from 1 choice
>ata1.00: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.01: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
>ata1.01: 312581808 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>usb 1-6: new high speed USB device using ehci_hcd and address 5
>usb 1-6: configuration #1 chosen from 1 choice
>ata2.00: ATAPI: LITE-ON DVD SOHD-167T, 9S15, max UDMA/33
>ata2.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BS0C, max UDMA/66
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>ata2.00: configured for UDMA/33
>usb 2-1: configuration #1 chosen from 1 choice
>input: Logitech Trackball as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:10.0-1
>ata2.01: configured for UDMA/66
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S15 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            LITE-ON  DVDRW SOHW-1633S BS0C PQ: 0 ANSI: 5
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>sata_via 0000:00:0f.0: version 2.3
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 10
>scsi2 : sata_via
>scsi3 : sata_via
>ata3: SATA max UDMA/133 cmd 0x000000000001d000 ctl 0x000000000001c802 bmdma 0x000000000001b800 irq 20
>ata4: SATA max UDMA/133 cmd 0x000000000001c400 ctl 0x000000000001c002 bmdma 0x000000000001b808 irq 20
>ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>sata_promise 0000:00:08.0: version 2.10
>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
>scsi4 : sata_promise
>scsi5 : sata_promise
>scsi6 : sata_promise
>ata5: SATA max UDMA/133 cmd 0xffffc20000634200 ctl 0xffffc20000634238 bmdma 0x0000000000000000 irq 18
>ata6: SATA max UDMA/133 cmd 0xffffc20000634280 ctl 0xffffc200006342b8 bmdma 0x0000000000000000 irq 18
>ata7: PATA max UDMA/133 cmd 0xffffc20000634300 ctl 0xffffc20000634338 bmdma 0x0000000000000000 irq 18
>ata5: SATA link down (SStatus 0 SControl 0)
>ata6: SATA link down (SStatus 0 SControl 300)
>Initializing USB Mass Storage driver...
>scsi7 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>usb-storage: device scan complete
>scsi 8:0:0:0: Direct-Access     AFT PRO  -8MX CF          0822 PQ: 0 ANSI: 0
>scsi 7:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0128 PQ: 0 ANSI: 0
>scsi 7:0:0:1: Direct-Access     Generic  STORAGE DEVICE   0128 PQ: 0 ANSI: 0
>scsi 8:0:0:1: Direct-Access     AFT PRO  -8MX SD          0822 PQ: 0 ANSI: 0
>scsi 8:0:0:2: Direct-Access     AFT PRO  -8MX SM/XD       0822 PQ: 0 ANSI: 0
>scsi 7:0:0:2: Direct-Access     Generic  STORAGE DEVICE   0128 PQ: 0 ANSI: 0
>scsi 8:0:0:3: Direct-Access     AFT PRO  -8MX MS          0822 PQ: 0 ANSI: 0
>scsi 7:0:0:3: Direct-Access     Generic  STORAGE DEVICE   0128 PQ: 0 ANSI: 0
>sd 7:0:0:0: [sdc] Attached SCSI removable disk
>sd 7:0:0:1: [sdd] Attached SCSI removable disk
>sd 7:0:0:2: [sde] Attached SCSI removable disk
>sd 7:0:0:3: [sdf] Attached SCSI removable disk
>sd 8:0:0:0: [sdg] Attached SCSI removable disk
>sd 8:0:0:1: [sdh] Attached SCSI removable disk
>sd 8:0:0:2: [sdi] Attached SCSI removable disk
>sd 8:0:0:3: [sdj] Attached SCSI removable disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1195810820.759:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>scsi 1:0:1:0: Attached scsi generic sg3 type 5
>sd 7:0:0:0: Attached scsi generic sg4 type 0
>sd 7:0:0:1: Attached scsi generic sg5 type 0
>sd 7:0:0:2: Attached scsi generic sg6 type 0
>sd 7:0:0:3: Attached scsi generic sg7 type 0
>sd 8:0:0:0: Attached scsi generic sg8 type 0
>sd 8:0:0:1: Attached scsi generic sg9 type 0
>sd 8:0:0:2: Attached scsi generic sg10 type 0
>sd 8:0:0:3: Attached scsi generic sg11 type 0
>Linux video capture interface: v2.00
>input: PC Speaker as /class/input/input3
>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Disallowing DAC for device 0000:00:0a.0
>skge 1.11 addr 0xf9a00000 irq 17 chip Yukon-Lite rev 7
>skge eth0: addr 00:11:2f:87:de:63
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>pwc: Philips webcam module version 10.0.13 loaded.
>pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
>pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
>pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
>pwc: Logitech QuickCam Pro 3000 USB webcam detected.
>pwc: Registered as /dev/video0.
>usbcore: registered new interface driver Philips webcam
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>firewire_ohci: Added fw-ohci device 0000:00:07.0, OHCI version 1.0
>firewire_ohci:     Isochronous I/O is not yet implemented for OHCI 1.0 chips.
>firewire_ohci:     Cameras, audio devices etc. won't work on this controller with this driver version.
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt 0000:00:0d.1[A] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:00:0d.1, OHCI version 1.10
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>usbcore: registered new interface driver snd-usb-audio
>cannot find the slot for index 0 (range 0-0), error: -16
>VIA 82xx Audio: probe of 0000:00:11.5 failed with error -12
>PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22
>nvidia: module license 'NVIDIA' taints kernel.
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>PCI: Setting latency timer of device 0000:00:11.6 to 64
>ACPI: PCI interrupt for device 0000:00:11.6 disabled
>VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 4096564k swap on /dev/sda3.  Priority:-1 extents:1 across:4096564k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Clocksource tsc unstable (delta = -91562934 ns)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1195839636.180:3): audit_pid=2120 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>usb 1-8: new high speed USB device using ehci_hcd and address 6
>usb 1-8: configuration #1 chosen from 1 choice
>scsi9 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 9:0:0:0: Direct-Access     WDC WD15 3BA              16.1 PQ: 0 ANSI: 0
>sd 9:0:0:0: [sdk] 30043440 512-byte hardware sectors (15382 MB)
>sd 9:0:0:0: [sdk] Write Protect is off
>sd 9:0:0:0: [sdk] Mode Sense: 03 00 00 00
>sd 9:0:0:0: [sdk] Assuming drive cache: write through
>sd 9:0:0:0: [sdk] 30043440 512-byte hardware sectors (15382 MB)
>sd 9:0:0:0: [sdk] Write Protect is off
>sd 9:0:0:0: [sdk] Mode Sense: 03 00 00 00
>sd 9:0:0:0: [sdk] Assuming drive cache: write through
> sdk: sdk1
>sd 9:0:0:0: [sdk] Attached SCSI disk
>sd 9:0:0:0: Attached scsi generic sg12 type 0
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/66
>ata2: EH complete
>usb 1-8: USB disconnect, address 6
>ata2.00: qc timeout (cmd 0xa0)
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 51/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/66
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.00: qc timeout (cmd 0xa0)
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
>         res 51/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/66
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.00: qc timeout (cmd 0xa0)
>ata2.00: limiting speed to UDMA/25:PIO4
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
>         res 51/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2.01: configured for UDMA/66
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.00: qc timeout (cmd 0xa0)
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
>         res 51/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2.01: configured for UDMA/66
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2.01: configured for UDMA/66
>ata2: EH complete
>ata2.00: qc timeout (cmd 0xa0)
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
>         res 51/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2.01: configured for UDMA/66
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: qc timeout (cmd 0xa1)
>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata2.01: revalidation failed (errno=-5)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: port is slow to respond, please be patient (Status 0x80)
>ata2: device not ready (errno=-16), forcing hardreset
>ata2: soft resetting port
>ata2: port is slow to respond, please be patient (Status 0x80)
>ata2: SRST failed (errno=-16)
>ata2: soft resetting port
>ata2.01: qc timeout (cmd 0xa1)
>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata2.01: revalidation failed (errno=-5)
>ata2.01: limiting speed to UDMA/66:PIO3
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: port is slow to respond, please be patient (Status 0x80)
>ata2: device not ready (errno=-16), forcing hardreset
>ata2: soft resetting port
>ata2: port is slow to respond, please be patient (Status 0x80)
>ata2.01: qc timeout (cmd 0xa1)
>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata2.01: revalidation failed (errno=-5)
>ata2.01: disabled
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40)
>ata2.00: revalidation failed (errno=-5)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: soft resetting port
>ata2: port is slow to respond, please be patient (Status 0x80)
>ata2: SRST failed (errno=-16)
>ata2: soft resetting port
>ata2.00: revalidation failed (errno=-2)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: soft resetting port
>ata2: port is slow to respond, please be patient (Status 0x80)
>ata2: SRST failed (errno=-16)
>ata2: soft resetting port
>ata2.00: qc timeout (cmd 0xef)
>ata2.00: failed to set xfermode (err_mask=0x4)
>ata2.00: disabled
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: soft resetting port
>ata2: port is slow to respond, please be patient (Status 0x90)
>ata2: SRST failed (errno=-16)
>ata2: soft resetting port
>ata2: EH complete
>skge eth0: Link is down.
>skge eth0: Link is up at 100 Mbps, full duplex, flow control both

Actions: View

Attachments on bug 397191: 267771