Attachment 268321 Details for Bug 242123 – lspci output

lspci output

lspci (text/plain), 14.78 KB, created by Brian Rademacher on 2007-11-25 20:13:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Brian Rademacher

Created: 2007-11-25 20:13:20 UTC

Size: 14.78 KB

patch

obsolete

>00:02.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: fb000000-fcffffff
>	Prefetchable memory behind bridge: e2000000-e20fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [b0] HyperTransport: Slave or Primary Interface
>		Command: BaseUnitID=3 UnitCnt=1 MastHost- DefDir- DUL-
>		Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>		Revision ID: 1.04
>		Link Frequency 0: 200MHz
>		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>		Link Frequency 1: 200MHz
>		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>		Prefetchable memory behind bridge Upper: 00-00
>		Bus Number: 00
>	Capabilities: [f0] HyperTransport: Interrupt Discovery and Configuration
>
>00:03.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 20)
>	Subsystem: Unknown device 19d5:2203
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (250ns min, 6000ns max)
>
>00:03.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
>	Subsystem: Unknown device 19d5:2203
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: fd000000-fd0fffff
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [a0] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
>		Status: Dev=00:0a.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
>		Upstream: Capacity=14 CommitmentLimit=65535
>		Downstream: Capacity=2 CommitmentLimit=65535
>	Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
>	Capabilities: [c0] HyperTransport: Slave or Primary Interface
>		!!! Possibly incomplete decoding
>		Command: BaseUnitID=10 UnitCnt=2 MastHost- DefDir-
>		Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
>		Revision ID: 1.02
>
>00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) (prog-if 10 [IO-APIC])
>	Subsystem: Unknown device 19d5:2203
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at febfe000 (64-bit, non-prefetchable) [size=4K]
>
>00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
>	Memory behind bridge: fd100000-fd1fffff
>	Prefetchable memory behind bridge: 00000000e2100000-00000000e21fffff
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [a0] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
>		Status: Dev=00:0b.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
>		Upstream: Capacity=14 CommitmentLimit=65535
>		Downstream: Capacity=2 CommitmentLimit=65535
>	Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
>
>00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) (prog-if 10 [IO-APIC])
>	Subsystem: Unknown device 19d5:2203
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
>
>00:0e.0 IDE interface: ALi Corporation M5229 IDE (rev c5) (prog-if fa)
>	Subsystem: Unknown device 19d5:2203
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Interrupt: pin A routed to IRQ 19
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 4: I/O ports at f000 [size=16]
>
>00:0f.0 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) (prog-if 20 [EHCI])
>	Subsystem: Unknown device 19d5:2203
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin D routed to IRQ 23
>	Region 0: Memory at fd203000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port
>
>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Revision ID: 1.02
>	Capabilities: [a0] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Revision ID: 1.02
>	Capabilities: [c0] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
>		Revision ID: 1.02
>
>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
>		Revision ID: 1.02
>	Capabilities: [a0] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Revision ID: 1.02
>	Capabilities: [c0] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
>		Revision ID: 1.02
>
>00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>01:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
>	Subsystem: ATI Technologies Inc Rage XL
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 7
>	Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: I/O ports at d000 [size=256]
>	Region 2: Memory at fc020000 (32-bit, non-prefetchable) [size=4K]
>	[virtual] Expansion ROM at e2000000 [disabled] [size=128K]
>	Capabilities: [5c] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:03.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
>	Subsystem: Marvell Technology Group Ltd. Unknown device 11ab
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 26
>	Region 0: Memory at fd000000 (64-bit, non-prefetchable) [size=1M]
>	Region 2: I/O ports at e000 [size=256]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] PCI-X non-bridge device
>		Command: DPERE- ERO- RBC=512 OST=4
>		Status: Dev=02:03.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=4 DMCRS=8 RSCEM- 266MHz- 533MHz-
>
>03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03)
>	Subsystem: ABIT Computer Corp. Unknown device 2202
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (16000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 31
>	Region 0: Memory at fd100000 (64-bit, non-prefetchable) [size=64K]
>	Region 2: Memory at fd110000 (64-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at e2100000 [disabled] [size=64K]
>	Capabilities: [40] PCI-X non-bridge device
>		Command: DPERE- ERO- RBC=2048 OST=1
>		Status: Dev=03:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
>		Address: 04500073000144a4  Data: 10d0
>
>03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03)
>	Subsystem: ABIT Computer Corp. Unknown device 2202
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (16000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 28
>	Region 0: Memory at fd120000 (64-bit, non-prefetchable) [size=64K]
>	Region 2: Memory at fd130000 (64-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at e2110000 [disabled] [size=64K]
>	Capabilities: [40] PCI-X non-bridge device
>		Command: DPERE- ERO+ RBC=512 OST=1
>		Status: Dev=03:04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
>		Address: 0c02d020700c49a0  Data: 5003
>

Actions: View

Attachments on bug 242123: 155934 | 155939 | 155940 | 268321