Attachment 268701 Details for Bug 393431 – rt kernel boot up log

rt kernel boot up log

rt_kernel_bootlog (text/plain), 26.80 KB, created by IBM Bug Proxy on 2007-11-26 09:50:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: IBM Bug Proxy

Created: 2007-11-26 09:50:35 UTC

Size: 26.80 KB

patch

obsolete

>root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
>kernel /boot/vmlinuz-autobench ro crashkernel=128M@16M console=tty0 console=tty
>S0,57600 autobench_args: root=/dev/sda3 ABAT:1195815016
>   [Linux-bzImage, setup=0x1e00, size=0x20cc18]
>initrd /boot/initrd-autobench.img
>   [Linux-initrd @ 0x37d98000, 0x25730c bytes]
>
>Linux version 2.6.21-ibmrt1.13 (root@elm3b180) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #3 SMP PREEMPT RT Fri Nov 23 05:38:28 EST 2007
>Command line: ro crashkernel=128M@16M console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda3 ABAT:1195815016
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
> BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff50000 (usable)
> BIOS-e820: 000000007ff50000 - 000000007ff61000 (ACPI data)
> BIOS-e820: 000000007ff61000 - 000000007ff80000 (ACPI NVS)
> BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F69F0, 0014 (r0 PTLTD )
>ACPI: RSDT 7FF5AB42, 003C (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 7FF60DCD, 0074 (r1 INTEL  TUMWATER  6040000 PTL         3)
>ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r1 C-state control [20070126]
>ACPI: DSDT 7FF5C3B0, 4A1D (r1  Intel BLAKFORD  6040000 MSFT  100000E)
>ACPI: FACS 7FF61FC0, 0040
>ACPI: APIC 7FF60E41, 0090 (r1 PTLTD      APIC    6040000  LTP        0)
>ACPI: MCFG 7FF60ED1, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
>ACPI: BOOT 7FF60F0D, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: ASF! 7FF60F35, 00CB (r16    IBM           1000000             0)
>ACPI: SSDT 7FF5AB7E, 13EC (r1  PmRef    CpuPm     3000 INTL 20050228)
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      154
>    0:      256 ->   524112
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
>Processor #6
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
>Processor #7
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009a000 - 000000000009b000
>Nosave address range: 000000000009b000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000d6000
>Nosave address range: 00000000000d6000 - 00000000000d8000
>Nosave address range: 00000000000d8000 - 00000000000e4000
>Nosave address range: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 36864 bytes of per cpu data
>Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
>Built 1 zonelists.  Total pages: 510314
>Kernel command line: ro crashkernel=128M@16M console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda3 ABAT:1195815016
>Initializing CPU#0
>WARNING: experimental RCU implementation.
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 3000.105 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Memory: 1903700k/2096448k available (2544k kernel code, 191964k reserved, 1980k data, 236k init)
>Calibrating delay using timer specific routine.. 6002.48 BogoMIPS (lpj=3001242)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x6
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5999.16 BogoMIPS (lpj=2999582)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5999.15 BogoMIPS (lpj=2999579)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU2: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x7
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5999.12 BogoMIPS (lpj=2999561)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 1
>CPU3: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 06
>Brought up 4 CPUs
>migration_cost=20,6752
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - e0bfffff
>PCI: No mmconfig possible on device 0c:03
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
>pnp: 00:01: iomem range 0xfec81000-0xfec81fff has been reserved
>pnp: 00:01: iomem range 0xfec81400-0xfec823ff could not be reserved
>PCI: Bridge: 0000:07:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:06:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:06:00.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: f0300000-f03fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: 2000-2fff
>  MEM window: f0200000-f02fffff
>  PREFETCH window: 88000000-880fffff
>PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:02:00.0
>PCI: Bridge: 0000:00:04.0
>  IO window: 3000-3fff
>  MEM window: cd000000-ceffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f0400000-f04fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: f0500000-f05fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 32768 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 32768 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2396k freed
>Simple Boot Flag at 0x3b set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1196050098.077:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>aer: probe of 0000:00:02.0:pcie01 failed with error 2
>aer: probe of 0000:00:03.0:pcie01 failed with error 2
>aer: probe of 0000:00:04.0:pcie01 failed with error 2
>aer: probe of 0000:00:05.0:pcie01 failed with error 1
>aer: probe of 0000:00:06.0:pcie01 failed with error 2
>aer: probe of 0000:00:07.0:pcie01 failed with error 1
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7FF5BF6A, 017C (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FF5C0E6, 0066 (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: SSDT 7FF5C14C, 0066 (r1  PmRef  Cpu2Ist     3000 INTL 20050228)
>ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: SSDT 7FF5C1B2, 0066 (r1  PmRef  Cpu3Ist     3000 INTL 20050228)
>ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU3] (supports 8 throttling states)
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ESB2: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>ESB2: chipset revision 9
>ESB2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
>hda: TSSTcorp CDW/DVD TS-H492C, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 1668k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block dUSB Universal Host Controller Interface driver v3.0
>evice nodes.
>LoACPI: PCI Interrupt 0000:00:1d.0[A] -> ading uhci-hcd.kGSI 16 (level, low) -> IRQ 16
>o module
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Loading ohci-hcdACPI: PCI Interrupt 0000:00:1d.7[A] -> .ko module
>LoadGSI 16 (level, low) -> IRQ 16
>ing ehci-hcd.ko ehci_hcd 0000:00:1d.7: EHCI Host Controller
>module
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf0604000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>LSCSI subsystem initialized
>oading scsi_mod.ko module
>LoadiFusion MPT base driver 3.04.04
>ng sd_mod.ko modCopyright (c) 1999-2007 LSI Logic Corporation
>ule
>Loading scsFusion MPT SAS Host driver 3.04.04
>i_transport_sas.ACPI: PCI Interrupt 0000:01:00.0[A] -> ko module
>LoadiGSI 16 (level, low) -> IRQ 16
>ng mptbase.ko momptbase: Initiating ioc0 bringup
>dule
>Loading mptscsih.ko module
>Loading mptsas.ko module
>ioc0: SAS1064E: Capabilities={Initiator}
>scsi0 : ioc0: LSISAS1064E, FwRev=010f0000h, Ports=1, MaxQ=511, IRQ=16
>scsi 0:0:0:0: Direct-Access     IBM-ESXS MAX3073RC        T904 PQ: 0 ANSI: 5
>SCSI device sda: 143374000 512-byte hdwr sectors (73407 MB)
>sda: Write Protect is off
>SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 143374000 512-byte hdwr sectors (73407 MB)
>sda: Write Protect is off
>SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>Waiting for driver initialization.
>Scanning and configuring dmraid supported devices
>Trying to resume from /dev/sda2
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>EXT3-fs: sda3: orphan cleanup on readonly fs
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda3: 84 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>audit(1196050113.211:2): enforcing=1 old_enforcing=0 auid=4294967295
>audit(1196050113.340:3): policy loaded auid=4294967295
>INIT: version 2.86 booting
>                Welcome to Red Hat Enterprise Linux Server
>                Press 'I' to enter interactive startup.
>Setting clock  (localtime): Mon Nov 26 04:08:35 EST 2007 [  OK  ]
>Starting udev: [  OK  ]
>Loading default keymap (us): [  OK  ]
>Setting hostname elm3b180:  [  OK  ]
>No devices found
>Setting up Logical Volume Management:   No volume groups found
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda3 
>/dev/sda3: clean, 235182/3204992 files, 2527391/6399894 blocks
>[/sbin/fsck.ext3 (1) -- /test] fsck.ext3 -a /dev/sda4 
>/test: recovering journal
>/test: clean, 11/4358144 files, 157269/8705221 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling /etc/fstab swaps:  [  OK  ]
>INIT: Entering runlevel: 3
>Entering non-interactive startup
>Starting background readahead: [  OK  ]
>Enabling ondemand cpu frequency scaling: [  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  
>Determining IP information for eth0... done.
>[  OK  ]
>Starting auditd: [  OK  ]
>Starting restorecond: [  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>Starting mcstransd: [  OK  ]
>Starting setroubleshootd: [  OK  ]
>Starting RPC idmapd: [  OK  ]
>+ . /etc/init.d/functions
>++ TEXTDOMAIN=initscripts
>++ umask 022
>++ PATH=/sbin:/usr/sbin:/bin:/usr/bin
>++ export PATH
>++ '[' -z '' ']'
>++ COLUMNS=80
>++ '[' -z '' ']'
>+++ /sbin/consoletype
>++ CONSOLETYPE=serial
>++ '[' -f /etc/sysconfig/i18n -a -z '' ']'
>++ . /etc/profile.d/lang.sh
>+++ sourced=0
>+++ for langfile in /etc/sysconfig/i18n '$HOME/.i18n'
>+++ '[' -f /etc/sysconfig/i18n ']'
>+++ . /etc/sysconfig/i18n
>++++ LANG=en_US.UTF-8
>++++ SYSFONT=latarcyrheb-sun16
>+++ sourced=1
>+++ for langfile in /etc/sysconfig/i18n '$HOME/.i18n'
>+++ '[' -f //.i18n ']'
>+++ '[' -n '' ']'
>+++ '[' 1 = 1 ']'
>+++ '[' -n en_US.UTF-8 ']'
>+++ export LANG
>+++ '[' -n '' ']'
>+++ unset LC_ADDRESS
>+++ '[' -n '' ']'
>+++ unset LC_CTYPE
>+++ '[' -n '' ']'
>+++ unset LC_COLLATE
>+++ '[' -n '' ']'
>+++ unset LC_IDENTIFICATION
>+++ '[' -n '' ']'
>+++ unset LC_MEASUREMENT
>+++ '[' -n '' ']'
>+++ unset LC_MESSAGES
>+++ '[' -n '' ']'
>+++ unset LC_MONETARY
>+++ '[' -n '' ']'
>+++ unset LC_NAME
>+++ '[' -n '' ']'
>+++ unset LC_NUMERIC
>+++ '[' -n '' ']'
>+++ unset LC_PAPER
>+++ '[' -n '' ']'
>+++ unset LC_TELEPHONE
>+++ '[' -n '' ']'
>+++ unset LC_TIME
>+++ '[' -n '' ']'
>+++ unset LC_ALL
>+++ '[' -n '' ']'
>+++ unset LANGUAGE
>+++ '[' -n '' ']'
>+++ unset LINGUAS
>+++ '[' -n '' ']'
>+++ unset _XKB_CHARSET
>++++ /sbin/consoletype
>+++ consoletype=serial
>+++ '[' -n '' ']'
>+++ '[' -n '' ']'
>+++ '[' -n en_US.UTF-8 ']'
>+++ case $LANG in
>+++ '[' linux = linux ']'
>+++ '[' serial = vt ']'
>+++ unset SYSFONTACM SYSFONT
>+++ unset sourced
>+++ unset langfile
>++ '[' -z '' ']'
>++ '[' -f /etc/sysconfig/init ']'
>++ . /etc/sysconfig/init
>+++ BOOTUP=color
>+++ GRAPHICAL=yes
>+++ RES_COL=60
>+++ MOVE_TO_COL='echo -en \033[60G'
>+++ SETCOLOR_SUCCESS='echo -en \033[0;32m'
>+++ SETCOLOR_FAILURE='echo -en \033[0;31m'
>+++ SETCOLOR_WARNING='echo -en \033[0;33m'
>+++ SETCOLOR_NORMAL='echo -en \033[0;39m'
>+++ LOGLEVEL=3
>+++ PROMPT=yes
>+++ AUTOSWAP=no
>++ '[' serial = serial ']'
>++ BOOTUP=serial
>++ MOVE_TO_COL=
>++ SETCOLOR_SUCCESS=
>++ SETCOLOR_FAILURE=
>++ SETCOLOR_WARNING=
>++ SETCOLOR_NORMAL=
>++ '[' serial '!=' verbose ']'
>++ INITLOG_ARGS=-q
>++ __sed_discard_ignored_files='/$~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave$$/d'
>+ KEXEC=/sbin/kexec
>+ BOOTDIR=/boot
>+ KDUMP_KERNELVER=
>+ KDUMP_COMMANDLINE=
>+ KEXEC_ARGS=
>+ KDUMP_CONFIG_FILE=/etc/kdump.conf
>+ LOGGER='/usr/bin/logger -p info -t kdump'
>++ uname -m
>+ ARCH=x86_64
>+ standard_kexec_args=-p
>+ '[' -f /etc/sysconfig/kdump ']'
>+ . /etc/sysconfig/kdump
>++ KDUMP_KERNELVER=2.6.18-prep
>++ KDUMP_COMMANDLINE=
>++ KDUMP_COMMANDLINE_APPEND='irqpoll maxcpus=1 reset_devices=1'
>++ KDUMP_BOOTDIR=/boot
>++ KDUMP_IMG=vmlinuz
>++ KDUMP_IMG_EXT=
>+ case "$1" in
>+ '[' -s /proc/vmcore ']'
>+ start
>+ status
>+ '[' '!' -e /sys/kernel/kexec_crash_loaded ']'
>++ cat /sys/kernel/kexec_crash_loaded
>+ rc=0
>+ '[' 0 == 1 ']'
>+ return 1
>+ rc=1
>+ '[' 1 == 2 ']'
>+ '[' 1 == 0 ']'
>+ check_config
>+ '[' -z 2.6.18-prep ']'
>+ kdump_kver=2.6.18-prep
>+ kdump_kernel=/boot/vmlinuz-2.6.18-prep
>+ kdump_initrd=/boot/initrd-2.6.18-prepkdump.img
>+ '[' '!' -f /boot/vmlinuz-2.6.18-prep ']'
>+ '[' '!' -f /boot/initrd-2.6.18-prepkdump.img ']'
>++ stat -c %Y /boot/initrd-2.6.18-prepkdump.img
>+ image_time=1195820157
>++ grep '^kdump_post' /etc/kdump.conf
>++ cut '-d ' -f2
>+ KDUMP_POST=
>+ files='/etc/kdump.conf /boot/vmlinuz-2.6.18-prep '
>+ modified_files=
>+ for file in '$files'
>+ time_stamp=0
>+ '[' -f /etc/kdump.conf ']'
>++ stat -c %Y /etc/kdump.conf
>+ time_stamp=1193407487
>+ '[' 1193407487 -gt 1195820157 ']'
>+ for file in '$files'
>+ time_stamp=0
>+ '[' -f /boot/vmlinuz-2.6.18-prep ']'
>++ stat -c %Y /boot/vmlinuz-2.6.18-prep
>+ time_stamp=1195820055
>+ '[' 1195820055 -gt 1195820157 ']'
>+ '[' -n '' -a '' '!=' ' ' ']'
>+ return 0
>+ '[' 0 '!=' 0 ']'
>+ load_kdump
>+ '[' -z '' ']'
>++ cat /proc/cmdline
>+ KDUMP_COMMANDLINE='ro crashkernel=128M@16M console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda3 ABAT:1195815016'
>+ '[' x86_64 == ppc64 ']'
>++ grep 'Crash kernel' /proc/iomem
>++ grep -v 00000000-00000000
>+ MEM_RESERVED='  01000000-08ffffff : Crash kernel'
>+ '[' -z '  01000000-08ffffff : Crash kernel' ']'
>+ '[' x86_64 == i686 -o x86_64 == i386 ']'
>++ echo ro crashkernel=128M@16M console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda3 ABAT:1195815016
>++ sed -e 's/crashkernel=[0-9]\+[MmKkGg]@[0-9]\+[MmGgKk]//'
>+ KDUMP_COMMANDLINE='ro  console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda3 ABAT:1195815016'
>+ KDUMP_COMMANDLINE='ro  console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda3 ABAT:1195815016 irqpoll maxcpus=1 reset_devices=1'
>++ /sbin/kexec -p '--command-line=ro  console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda3 ABAT:1195815016 irqpoll maxcpus=1 reset_devices=1' --initrd=/boot/initrd-2.6.18-prepkdump.img /boot/vmlinuz-2.6.18-prep
>+ KEXEC_OUTPUT=
>+ '[' 0 == 0 ']'
>+ /usr/bin/logger -p info -t kdump 'kexec: loaded kdump kernel'
>+ return 0
>+ '[' 0 '!=' 0 ']'
>+ echo -n 'Starting kdump:'
>Starting kdump:+ success
>+ '[' serial '!=' verbose -a -z '' ']'
>+ echo_success
>+ '[' serial = color ']'
>+ echo -n '['
>[+ '[' serial = color ']'
>+ echo -n '  OK  '
>  OK  + '[' serial = color ']'
>+ echo -n ']'
>]+ echo -ne '\r'
>+ return 0
>+ return 0
>+ echo
>
>+ /usr/bin/logger -p info -t kdump 'started up'
>+ exit 0
>Starting system message bus: [  OK  ]
>[  OK  ] Bluetooth services:[  OK  ]
>Mounting other filesystems:  [  OK  ]
>Starting PC/SC smart card daemon (pcscd): [  OK  ]
>Starting hidd: [  OK  ]
>Starting autofs:  Loading autofs4: [  OK  ]
>Starting automount: [  OK  ]
>[  OK  ]
>Starting acpi daemon: [  OK  ]
>Starting sshd: [  OK  ]
>Starting cups: [  OK  ]
>Starting xinetd: [  OK  ]
>Starting ntpd: [  OK  ]
>BIOS Real Time mode not supported on this hardware
>Stopping irq balancer
>Binding interrupts to cpu_mask: fffffff... /etc/rc3.d/S80irqbindall: line 19: echo: write error: Input/output error
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Input/output error
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>/etc/rc3.d/S80irqbindall: line 19: echo: write error: Value too large for defined data type
>done.
>Starting console mouse services: [  OK  ]
>Starting crond: [  OK  ]
>Starting xfs: [  OK  ]
>Starting anacron: [  OK  ]
>Starting atd: [  OK  ]
>Starting yum-updatesd: [  OK  ]
>Starting Avahi daemon... [  OK  ]
>Starting HAL daemon: [  OK  ]
>Starting set_kthread_prio:  Setting kernel thread priorities: done
>[  OK  ]
>Starting smartd: [  OK  ]
>
>Red Hat Enterprise Linux Server release 5.1 (Tikanga)
>Kernel 2.6.21-ibmrt1.13 on an x86_64
>

Actions: View

Attachments on bug 393431: 268701 | 268711 | 277101 | 278781 | 278791