Attachment 269491 Details for Bug 400501 – dmesg and lspci output

dmesg and lspci output

dvd_bug-attachment.txt (text/plain), 72.92 KB, created by Bryan Che on 2007-11-27 02:30:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bryan Che

Created: 2007-11-27 02:30:06 UTC

Size: 72.92 KB

patch

obsolete

>This file contains output from dmesg and lspci -vvxxx
>
>**********************************
>
># dmesg 
>Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 21:41:26 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
> BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
> BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>1142MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6810
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 521936) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   521936
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   521936
>On node 0 totalpages: 521936
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2285 pages used for memmap
>  HighMem zone: 290275 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F67D0, 0024 (r2 LENOVO)
>ACPI: XSDT 7F6D1308, 008C (r1 LENOVO TP-79        2090  LTP        0)
>ACPI: FACP 7F6D1400, 00F4 (r3 LENOVO TP-79        2090 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT 7F6D175E, D481 (r1 LENOVO TP-79        2090 MSFT  100000E)
>ACPI: FACS 7F6F4000, 0040
>ACPI: SSDT 7F6D15B4, 01AA (r1 LENOVO TP-79        2090 MSFT  100000E)
>ACPI: ECDT 7F6DEBDF, 0052 (r1 LENOVO TP-79        2090 LNVO        1)
>ACPI: TCPA 7F6DEC31, 0032 (r2 LENOVO TP-79        2090 LNVO        1)
>ACPI: APIC 7F6DEC63, 0068 (r1 LENOVO TP-79        2090 LNVO        1)
>ACPI: MCFG 7F6DECCB, 003C (r1 LENOVO TP-79        2090 LNVO        1)
>ACPI: HPET 7F6DED07, 0038 (r1 LENOVO TP-79        2090 LNVO        1)
>ACPI: SLIC 7F6DEE62, 0176 (r1 LENOVO TP-79        2090  LTP        0)
>ACPI: BOOT 7F6DEFD8, 0028 (r1 LENOVO TP-79        2090  LTP        1)
>ACPI: SSDT 7F6F2697, 025F (r1 LENOVO TP-79        2090 INTL 20050513)
>ACPI: SSDT 7F6F28F6, 00A6 (r1 LENOVO TP-79        2090 INTL 20050513)
>ACPI: SSDT 7F6F299C, 04F7 (r1 LENOVO TP-79        2090 INTL 20050513)
>ACPI: SSDT 7F6F2E93, 01D8 (r1 LENOVO TP-79        2090 INTL 20050513)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
>swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
>swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000
>swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 517859
>Kernel command line: ro root=/dev/VolGroup00/LogVol01 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.016 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2061200k/2087744k available (2184k kernel code, 25256k reserved, 1116k data, 280k init, 1170240k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622165 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622165   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3993.53 BogoMIPS (lpj=1996765)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4069.82 BogoMIPS (lpj=2034913)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Total of 2 processors activated (8063.35 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 616836 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 17:55:46  Date: 11/26/07
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved
>pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: ee000000-ee0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-4fff
>  MEM window: ec000000-edffffff
>  PREFETCH window: e4000000-e40fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 5000-6fff
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: e4100000-e41fffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 7000-8fff
>  MEM window: ea000000-ebffffff
>  PREFETCH window: e4200000-e42fffff
>PCI: Bus 22, cardbus bridge: 0000:15:00.0
>  IO window: 00009000-000090ff
>  IO window: 00009400-000094ff
>  PREFETCH window: e0000000-e3ffffff
>  MEM window: 88000000-8bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-cfff
>  MEM window: e4300000-e7ffffff
>  PREFETCH window: e0000000-e3ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3597k freed
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1196099745.573:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key D5E5FC8EDCF186B6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7F6F1D36, 0282 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT 7F6F203D, 065A (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F6F1C6E, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT 7F6F1FB8, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (51 C)
>ACPI: Thermal Zone [THM1] (53 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
>Socket status: 30000007
>pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
>cs: IO port probe 0x9000-0xcfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:678:947
>  hash matches device tty4
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 845k
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xee444000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 23, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.3
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
>usb 5-2: new full speed USB device using uhci_hcd and address 2
>usb 5-2: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xf8852500 ctl 0x00000000 bmdma 0x00000000 irq 219
>ata2: SATA max UDMA/133 cmd 0xf8852580 ctl 0x00000000 bmdma 0x00000000 irq 219
>ata3: SATA max UDMA/133 cmd 0xf8852600 ctl 0x00000000 bmdma 0x00000000 irq 219
>ata4: SATA max UDMA/133 cmd 0xf8852680 ctl 0x00000000 bmdma 0x00000000 irq 219
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: HTS721010G9SA00, MCZIC10V, max UDMA/100
>ata1.00: 195371568 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZI PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>input: TPPS/2 IBM TrackPoint as /class/input/input3
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
>ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
>ata5.00: ATAPI: MATSHITADVD-RAM UJ-842, RB01, max UDMA/33
>ata5.00: configured for UDMA/33
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-842   RB01 PQ: 0 ANSI: 5
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1196099758.275:2): selinux=0 auid=4294967295
>Clocksource tsc unstable (delta = -127430085 ns)
>iTCO_vendor_support: vendor-support=0
>thinkpad_acpi: ThinkPad ACPI Extras v0.16
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 79ETC9WW (2.09 ), EC 79HT50WW-1.07
>thinkpad_acpi: Lenovo ThinkPad T60
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>thinkpad_acpi: radio switch found; radios are enabled
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: ThinkPad Extra Buttons as /class/input/input4
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:41:e5:3b:9f
>input: PC Speaker as /class/input/input5
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input8
>ACPI: Sleep Button (CM) [SLPB]
>input: Video Bus as /class/input/input9
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>intel_rng: FWH not detected
>input: Video Bus as /class/input/input10
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 19
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.19kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>ACPI: Battery Slot [BAT0] (battery present)
>NET: Registered protocol family 23
>pnp: Device 00:0a activated.
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x164e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: No dongle connected
>ACPI: AC Adapter [AC] (on-line)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
>hda_intel: probe_mask set to 0x1 for device 17aa:2010
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>Adding 2064376k swap on /dev/mapper/VolGroup00-LogVol02.  Priority:-1 extents:1 across:2064376k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1196099781.355:3): audit_pid=1899 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>cisco_ipsec: module license 'Proprietary' taints kernel.
>Cisco Systems VPN Client Version 4.8.00 (0490) kernel module loaded
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>virbr0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:19:bf:f6:00
>wlan0: RX authentication from 00:13:19:bf:f6:00 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:13:19:bf:f6:00
>wlan0: authentication frame received from 00:13:19:bf:f6:00, but not in authenticate state - ignored
>wlan0: RX AssocResp from 00:13:19:bf:f6:00 (capab=0x431 status=0 aid=69)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:13:19:bf:f6:00)
>wlan0: switched to short barker preamble (BSSID=00:13:19:bf:f6:00)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>wlan0: association frame received from 00:13:19:bf:f6:00, but not in associate state - ignored
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>tun0: Disabled Privacy Extensions
>wlan0: no IPv6 routers present
>hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f000a
>Monitor-Mwait will be used to enter C-3 state
>wlan0: RX deauthentication from 00:13:19:bf:f6:00 (reason=2)
>wlan0: deauthenticated
>wlan0: authenticate with AP 00:13:19:bf:f6:00
>wlan0: RX authentication from 00:13:19:bf:f6:00 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:13:19:bf:f6:00
>wlan0: RX ReassocResp from 00:13:19:bf:f6:00 (capab=0x431 status=0 aid=72)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:13:19:bf:f6:00)
>wlan0: switched to short barker preamble (BSSID=00:13:19:bf:f6:00)
>video bus notify
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:19:bf:f6:00
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:90:54:94:20
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:90:54:94:20
>wlan0: RX authentication from 00:1b:90:54:94:20 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:90:54:94:20
>wlan0: RX ReassocResp from 00:1b:90:54:94:20 (capab=0x431 status=0 aid=192)
>wlan0: associated
>wlan0: switched to long barker preamble (BSSID=00:1b:90:54:94:20)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>wlan0: No ProbeResp from current AP 00:1b:90:54:94:20 - assume out of range
>wlan0: No STA entry for own AP 00:1b:90:54:94:20
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:90:54:94:20
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:90:54:94:20
>wlan0: RX authentication from 00:1b:90:54:94:20 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:90:54:94:20
>wlan0: authentication frame received from 00:1b:90:54:94:20, but not in authenticate state - ignored
>wlan0: RX ReassocResp from 00:1b:90:54:94:20 (capab=0x431 status=0 aid=193)
>wlan0: associated
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>wlan0: RX deauthentication from 00:1b:90:54:94:20 (reason=2)
>wlan0: deauthenticated
>wlan0: authenticate with AP 00:1b:90:54:94:20
>wlan0: RX authentication from 00:1b:90:54:94:20 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:90:54:94:20
>wlan0: RX ReassocResp from 00:1b:90:54:94:20 (capab=0x431 status=0 aid=205)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:1b:90:54:94:20)
>wlan0: RX deauthentication from 00:1b:90:54:94:20 (reason=2)
>wlan0: deauthenticated
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:19:bf:f6:00
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:19:bf:f6:00
>wlan0: RX authentication from 00:13:19:bf:f6:00 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:13:19:bf:f6:00
>wlan0: RX ReassocResp from 00:13:19:bf:f6:00 (capab=0x431 status=0 aid=102)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:13:19:bf:f6:00)
>wlan0: switched to short barker preamble (BSSID=00:13:19:bf:f6:00)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>video bus notify
>video bus notify
>wlan0: switched to long barker preamble (BSSID=00:13:19:bf:f6:00)
>wlan0: switched to short barker preamble (BSSID=00:13:19:bf:f6:00)
>wlan0: No ProbeResp from current AP 00:13:19:bf:f6:00 - assume out of range
>wlan0: No STA entry for own AP 00:13:19:bf:f6:00
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:19:bf:f6:00
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:45:ce:31:60
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:45:ce:31:60
>wlan0: RX authentication from 00:1d:45:ce:31:60 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1d:45:ce:31:60
>wlan0: RX ReassocResp from 00:1d:45:ce:31:60 (capab=0x431 status=0 aid=15)
>wlan0: associated
>wlan0: switched to long barker preamble (BSSID=00:1d:45:ce:31:60)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>video bus notify
>video bus notify
>tun0: Disabled Privacy Extensions
>video bus notify
>wlan0: switched to short barker preamble (BSSID=00:1d:45:ce:31:60)
>video bus notify
>video bus notify
>video bus notify
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:45:ce:31:60
>wlan0: disassociate(reason=3)
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>pnp: Device 00:0a disabled.
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Disabling non-boot CPUs ...
>kvm: disabling virtualization on CPU1
>Breaking affinity for irq 12
>Breaking affinity for irq 20
>Breaking affinity for irq 21
>Breaking affinity for irq 22
>Breaking affinity for irq 217
>Breaking affinity for irq 219
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3991.57 BogoMIPS (lpj=1995787)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>kvm: enabling virtualization on CPU1
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata6: port disabled. ignoring.
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata5.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>Coming out of suspend...
>pnp: Device 00:0a activated.
>ata4: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata2: SATA link down (SStatus 0 SControl 0)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 5-2: USB disconnect, address 2
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>usb 5-2: new full speed USB device using uhci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:e3:e4:24:45
>wlan0: RX authentication from 00:19:e3:e4:24:45 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:e3:e4:24:45
>wlan0: RX AssocResp from 00:19:e3:e4:24:45 (capab=0x411 status=0 aid=2)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:19:e3:e4:24:45)
>wlan0: switched to short barker preamble (BSSID=00:19:e3:e4:24:45)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>tun0: Disabled Privacy Extensions
>wlan0: switched to long barker preamble (BSSID=00:19:e3:e4:24:45)
>wlan0: switched to short barker preamble (BSSID=00:19:e3:e4:24:45)
>wlan0: no IPv6 routers present
>wlan0: switched to long barker preamble (BSSID=00:19:e3:e4:24:45)
>wlan0: switched to short barker preamble (BSSID=00:19:e3:e4:24:45)
>video bus notify
>wlan0: switched to long barker preamble (BSSID=00:19:e3:e4:24:45)
>
>
>
>**********************************
>
>
># lspci -vvxxx
>00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
>	Subsystem: Lenovo Thinkpad R60e model 0657
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information
>00: 86 80 a0 27 06 01 90 20 03 00 00 06 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 17 20
>30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
>40: 01 90 d1 fe 01 40 d1 fe 05 00 00 f0 01 80 d1 fe
>50: 00 00 30 00 19 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 10 11 11 01 30 11 11 00 ff 03 00 00 80 1a 39 00
>a0: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 04 01 00 00
>e0: 09 00 09 51 02 04 0a 90 0e 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 05 00 10 00 00 00
>
>00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
>	Subsystem: Lenovo Thinkpad R60e model 0657
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at ee100000 (32-bit, non-prefetchable) [size=512K]
>	Region 1: I/O ports at 1800 [size=8]
>	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
>	Region 3: Memory at ee200000 (32-bit, non-prefetchable) [size=256K]
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [d0] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: 86 80 a2 27 07 00 90 00 03 00 00 03 00 00 80 00
>10: 00 00 10 ee 01 18 00 00 08 00 00 d0 00 00 20 ee
>20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 1a 20
>30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00
>40: 00 00 00 00 48 00 00 00 09 00 09 51 02 04 0a 90
>50: 0e 00 30 00 19 00 00 00 00 00 00 00 00 00 80 7f
>60: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 05 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 03 00 64 34 fe 00 00 00 86 0f 05 00 00 00 00 00
>
>00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
>	Subsystem: Lenovo Thinkpad R60e model 0657
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Region 0: Memory at ee180000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [d0] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: 86 80 a6 27 03 00 90 00 03 00 80 03 00 00 80 00
>10: 00 00 18 ee 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 1a 20
>30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
>40: 00 00 00 00 48 00 00 00 09 00 09 51 02 04 0a 90
>50: 0e 00 30 00 19 00 00 00 00 00 00 00 00 00 80 7f
>60: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 03 00 64 34 fe 00 00 00 86 0f 05 00 00 00 00 00
>
>00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
>	Subsystem: Lenovo ThinkPad T60/R60 series
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 22
>	Region 0: Memory at ee240000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Express Unknown type IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
>		Link: Latency L0s <64ns, L1 <1us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed unknown, Width x0
>00: 86 80 d8 27 06 01 10 00 02 00 03 04 10 00 00 00
>10: 04 00 24 ee 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 10 20
>30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00
>40: 01 00 00 03 00 00 00 00 00 00 00 00 00 80 00 00
>50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
>60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 10 00 91 00 00 00 00 00 00 08 10 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: ee000000-ee0fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
>		Link: Latency L0s <256ns, L1 <4us
>		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 2, PowerLimit 6.500000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: fee0100c  Data: 00d1
>	Capabilities: [90] Subsystem: Lenovo Unknown device 2011
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: 86 80 d0 27 07 05 10 00 02 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 02 02 00 20 20 00 00
>20: 00 ee 00 ee f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00
>40: 10 80 41 01 c0 0f 00 00 00 00 11 00 11 2c 11 01
>50: 42 00 11 30 e0 a0 10 00 28 00 40 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 05 90 00 00 0c 10 e0 fe d1 00 00 00 00 00 00 00
>90: 0d a0 00 00 aa 17 11 20 00 00 00 00 00 00 00 00
>a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 80 00 11 c0 00 00 00 00
>e0: 00 0f c7 00 06 07 08 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 00003000-00004fff
>	Memory behind bridge: ec000000-edffffff
>	Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
>		Link: Latency L0s <256ns, L1 <4us
>		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 3, PowerLimit 6.500000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0100c  Data: 00d9
>	Capabilities: [90] Subsystem: Lenovo Unknown device 2011
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: 86 80 d2 27 07 05 10 00 02 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 03 03 00 30 40 00 00
>20: 00 ec f0 ed 01 e4 01 e4 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 04 00
>40: 10 80 41 01 c0 0f 00 00 00 00 10 00 11 2c 11 02
>50: 42 00 11 30 e0 a0 18 00 00 00 40 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 05 90 01 00 0c 10 e0 fe d9 00 00 00 00 00 00 00
>90: 0d a0 00 00 aa 17 11 20 00 00 00 00 00 00 00 00
>a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 80 00 11 00 00 00 00 00
>e0: 00 0f c7 80 06 07 08 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
>	I/O behind bridge: 00005000-00006fff
>	Memory behind bridge: e8000000-e9ffffff
>	Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 4, PowerLimit 6.500000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0100c  Data: 00e1
>	Capabilities: [90] Subsystem: Lenovo Unknown device 2011
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: 86 80 d4 27 07 05 10 00 02 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 04 0b 00 50 60 00 20
>20: 00 e8 f0 e9 11 e4 11 e4 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 03 04 00
>40: 10 80 41 01 c0 0f 00 00 00 00 10 00 11 4c 11 03
>50: 00 00 01 10 e0 a0 20 00 28 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 05 90 01 00 0c 10 e0 fe e1 00 00 00 00 00 00 00
>90: 0d a0 00 00 aa 17 11 20 00 00 00 00 00 00 00 00
>a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 80 00 11 c0 00 00 00 00
>e0: 00 00 c7 00 06 07 08 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0
>	I/O behind bridge: 00007000-00008fff
>	Memory behind bridge: ea000000-ebffffff
>	Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 5, PowerLimit 6.500000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0100c  Data: 00e9
>	Capabilities: [90] Subsystem: Lenovo Unknown device 2011
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: 86 80 d6 27 07 05 10 00 02 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 0c 13 00 70 80 00 20
>20: 00 ea f0 eb 21 e4 21 e4 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 04 04 00
>40: 10 80 41 01 c0 0f 00 00 00 00 10 00 11 4c 11 04
>50: 00 00 01 10 e0 a0 28 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 05 90 01 00 0c 10 e0 fe e9 00 00 00 00 00 00 00
>90: 0d a0 00 00 aa 17 11 20 00 00 00 00 00 00 00 00
>a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 80 00 11 00 00 00 00 00
>e0: 00 00 c7 00 06 07 08 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Lenovo ThinkPad T60/R60 series
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 4: I/O ports at 1820 [size=32]
>00: 86 80 c8 27 05 00 80 02 02 00 03 0c 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 21 18 00 00 00 00 00 00 00 00 00 00 aa 17 0a 20
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Lenovo ThinkPad T60/R60 series
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 22
>	Region 4: I/O ports at 1840 [size=32]
>00: 86 80 c9 27 05 00 80 02 02 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 41 18 00 00 00 00 00 00 00 00 00 00 aa 17 0a 20
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Lenovo ThinkPad T60/R60 series
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 23
>	Region 4: I/O ports at 1860 [size=32]
>00: 86 80 ca 27 05 00 80 02 02 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 61 18 00 00 00 00 00 00 00 00 00 00 aa 17 0a 20
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Lenovo ThinkPad T60/R60 series
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 21
>	Region 4: I/O ports at 1880 [size=32]
>00: 86 80 cb 27 05 00 80 02 02 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 81 18 00 00 00 00 00 00 00 00 00 00 aa 17 0a 20
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
>	Subsystem: Lenovo ThinkPad T60/R60 series
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 21
>	Region 0: Memory at ee444000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port
>00: 86 80 cc 27 06 01 90 02 02 20 03 0c 00 00 00 00
>10: 00 40 44 ee 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 0b 20
>30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
>60: 20 20 9f 01 00 00 00 00 01 00 00 00 00 00 08 c0
>70: 00 00 f7 3f 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 11 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 aa ff 00 ff 00 ff 00 20 00 00 88
>e0: 00 00 00 00 db b6 6d 00 00 00 00 00 00 00 00 00
>f0: 00 80 00 09 88 85 40 00 86 0f 02 00 06 17 02 20
>
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
>	I/O behind bridge: 00009000-0000cfff
>	Memory behind bridge: e4300000-e7ffffff
>	Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Subsystem: Lenovo Unknown device 2013
>00: 86 80 48 24 07 00 10 00 e2 01 04 06 00 00 01 00
>10: 00 00 00 00 00 00 00 00 00 15 18 20 90 c0 80 22
>20: 30 e4 f0 e7 01 e0 f1 e3 00 00 00 00 00 00 00 00
>30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 00
>50: 0d 00 00 00 aa 17 13 20 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
>	Subsystem: Lenovo ThinkPad T60/R60 series
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information
>00: 86 80 b9 27 07 00 10 02 02 00 01 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 09 20
>30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
>40: 01 10 00 00 80 00 00 00 81 11 00 00 10 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 0b 0b 0b 0b 92 00 00 00 0b 0b 0b 0b 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 10 02 0e 1f 01 16 7c 00 e1 15 0c 00 81 16 1c 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 24 06 00 00 00 00 00 00 13 1c 0a 00 00 03 00 00
>b0: 00 00 f0 00 00 00 00 00 00 00 12 0a 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 44 12 11 00 67 45 00 00 c0 ff 00 00 01 00 00 00
>e0: 09 00 0c 10 b4 02 24 17 00 00 00 00 00 00 00 00
>f0: 01 c0 d1 fe 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
>	Subsystem: Lenovo Thinkpad R60e model 0657
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 20
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 1810 [size=16]
>00: 86 80 df 27 05 00 80 02 02 8a 01 01 00 00 00 00
>10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
>20: 11 18 00 00 00 00 00 00 00 00 00 00 aa 17 0c 20
>30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 03 00 00
>40: 03 a3 00 00 00 00 00 00 01 00 02 00 00 00 00 00
>50: 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
>	Subsystem: Lenovo Thinkpad R60e model 0657
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 219
>	Region 0: I/O ports at 18d0 [size=8]
>	Region 1: I/O ports at 18c4 [size=4]
>	Region 2: I/O ports at 18c8 [size=8]
>	Region 3: I/O ports at 18c0 [size=4]
>	Region 4: I/O ports at 18b0 [size=16]
>	Region 5: Memory at ee444400 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0100c  Data: 004a
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: 86 80 c5 27 07 04 b0 02 02 01 06 01 00 00 00 00
>10: d1 18 00 00 c5 18 00 00 c9 18 00 00 c1 18 00 00
>20: b1 18 00 00 00 44 44 ee 00 00 00 00 aa 17 0d 20
>30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00
>40: 07 a3 00 80 00 00 00 00 01 00 02 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 01 00 02 40 00 00 00 00 00 00 00 00 00 00 00 00
>80: 05 70 01 00 0c 10 e0 fe 4a 00 00 00 00 00 00 00
>90: 40 00 15 10 80 01 00 4a 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
>	Subsystem: Lenovo ThinkPad T60/R60 series
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin A routed to IRQ 19
>	Region 4: I/O ports at 18e0 [size=32]
>00: 86 80 da 27 01 01 80 02 02 00 05 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: e1 18 00 00 00 00 00 00 00 00 00 00 aa 17 0f 20
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
>40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
>
>02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
>	Subsystem: Lenovo ThinkPad T60
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 217
>	Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at 2000 [size=32]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0300c  Data: 4162
>	Capabilities: [e0] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <64us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
>		Link: Latency L0s <128ns, L1 <64us
>		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>00: 86 80 9a 10 07 05 10 00 00 00 00 02 10 00 00 00
>10: 00 00 00 ee 00 00 00 00 01 20 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 01 20
>30: 00 00 00 00 c8 00 00 00 00 00 00 00 0b 01 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 0f
>d0: 05 e0 81 00 0c 30 e0 fe 00 00 00 00 62 41 00 00
>e0: 10 00 01 00 c1 0c 00 00 10 28 10 00 11 1c 07 00
>f0: 42 01 11 10 00 00 00 00 00 00 00 00 00 00 00 00
>
>03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
>	Subsystem: Intel Corporation Unknown device 1010
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 218
>	Region 0: Memory at edf00000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0100c  Data: 4152
>	Capabilities: [e0] Express Legacy Endpoint IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 unlimited
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
>		Link: Latency L0s <128ns, L1 <64us
>		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>00: 86 80 27 42 06 05 10 00 02 00 80 02 10 00 00 00
>10: 00 00 f0 ed 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 10 10
>30: 00 00 00 00 c8 00 00 00 00 00 00 00 0b 01 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 01 d0 22 48 00 00 00 0d
>d0: 05 e0 81 00 0c 10 e0 fe 00 00 00 00 52 41 00 00
>e0: 10 00 11 00 c0 0e 00 00 10 08 00 00 11 1c 07 00
>f0: 42 01 11 10 00 00 00 00 00 00 00 00 00 00 00 00
>
>15:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
>	Subsystem: Lenovo ThinkPad T60/R60 series
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 168, Cache Line Size: 128 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at e4300000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
>	Memory window 0: e0000000-e3fff000 (prefetchable)
>	Memory window 1: 88000000-8bfff000
>	I/O window 0: 00009000-000090ff
>	I/O window 1: 00009400-000094ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>00: 4c 10 56 ac 07 00 10 02 00 00 07 06 20 a8 02 00
>10: 00 00 30 e4 a0 00 00 02 15 16 17 b0 00 00 00 e0
>20: 00 f0 ff e3 00 00 00 88 00 f0 ff 8b 00 90 00 00
>30: fc 90 00 00 00 94 00 00 fc 94 00 00 0b 01 c0 05
>40: aa 17 12 20 01 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 70 d0 44 08 00 00 00 00 00 00 00 00 02 10 d0 01
>90: c0 02 64 40 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 01 00 12 fe 00 00 c0 00 03 00 00 00 0f 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Actions: View

Attachments on bug 400501: 269491