Attachment 275031 Details for Bug 407751 – dmesg 2.6.23

dmesg 2.6.23

dmesg_2_6_23.text (text/plain), 15.84 KB, created by mike simpson on 2007-12-02 11:00:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mike simpson

Created: 2007-12-02 11:00:02 UTC

Size: 15.84 KB

patch

obsolete

>Linux version 2.6.23.8-63.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Nov 21 18:51:08 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data)
> BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000fffea000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 65520) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    65520
>  HighMem     65520 ->    65520
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->    65520
>On node 0 totalpages: 65520
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 479 pages used for memmap
>  Normal zone: 60945 pages, LIFO batch:15
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F6F60, 0014 (r0 PTLTD )
>ACPI: RSDT 0FFFC484, 002C (r1 DELL   ATLAS II 20010113  LTP        0)
>ACPI: FACP 0FFFFB65, 0074 (r1 DELL   Atlas II 20010113 PTL     F4240)
>ACPI: DSDT 0FFFC4B0, 36B5 (r1    PTL    BX-TJ 20010113 MSFT  1000007)
>ACPI: FACS 0FFFFFC0, 0040
>ACPI: BOOT 0FFFFBD9, 0027 (r1 PTLTD  $SBFTBL$ 20010113  LTP        1)
>ACPI: PM-Timer IO Port: 0x8008
>Allocating PCI resources starting at 20000000 (gap: 10000000:effea000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ea000
>swsusp: Registered nosave memory region: 00000000000ea000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 65009
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0120c000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Detected 697.000 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 251120k/262080k available (2184k kernel code, 10328k reserved, 1116k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
>    lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622245 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622245   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1394.77 BogoMIPS (lpj=697385)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0c00)
>CPU0: Intel Pentium III (Coppermine) stepping 0a
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 10:38:11  Date: 12/02/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd9c5, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: Device [FDDA] status [00000008]: functional but not present; setting present
>ACPI: Device [CDRM] status [00000008]: functional but not present; setting present
>ACPI: EC: GPE = 0x0, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 8000-803f claimed by PIIX4 ACPI
>PCI quirk: region 2180-218f claimed by PIIX4 SMB
>PIIX4 devres I PIO at 0398-0399
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 14 15)
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PFN1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:05: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:05: iomem range 0xe8000-0xfffff could not be reserved
>pnp: 00:05: iomem range 0xdc000-0xdffff has been reserved
>pnp: 00:05: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:06: ioport range 0x8000-0x803f has been reserved
>pnp: 00:06: ioport range 0x2180-0x218f has been reserved
>pnp: 00:06: ioport range 0x398-0x399 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: fd000000-fecfffff
>  PREFETCH window: 28000000-280fffff
>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 20000000-23ffffff
>  MEM window: 24000000-27ffffff
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 98304 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3592k freed
>Simple Boot Flag at 0x63 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1196591892.239:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key AD2F53515391081
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Fan [FAN0] (off)
>ACPI: Transitioning device [FAN1] to D3
>ACPI: Transitioning device [FAN1] to D3
>ACPI: Fan [FAN1] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (50 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:00:0a.0 [1028:00dd]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:0a.0, mfunc 0x01201272, devctl 0x64
>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
>Socket status: 30000020
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:825:627
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>Marking TSC unstable due to: TSC halts in idle.
>Time: acpi_pm clocksource has been installed.
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x0000fce0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>hub 1-0:1.0: over-current change on port 2
>pccard: CardBus card inserted into slot 0
>SCSI subsystem initialized
>Synaptics Touchpad, model: 1, fw: 4.1, id: 0x8848a1, caps: 0x0/0x0
>libata version 2.21 loaded.
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ata_piix 0000:00:07.1: version 2.12
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fcd0 irq 14
>ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fcd8 irq 15
>ata1.00: ATA-5: MC8DE16G5APP, 2.2.00, max UDMA/66
>ata1.00: 31981568 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      MC8DE16G5APP     2.2. PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 31981568 512-byte hardware sectors (16375 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 31981568 512-byte hardware sectors (16375 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1196591897.691:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ssb: SPROM revision 1 detected.
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>input: PC Speaker as /class/input/input3
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>3c59x: Donald Becker and others.
>0000:00:0d.0: 3Com PCI 3c905C Tornado at d08fcc00.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SBTN]
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery absent)
>b43-phy0: Broadcom 4306 WLAN found
>b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>phy0: Selected rate control algorithm 'simple'
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>Clocksource tsc unstable (delta = -156824843 ns)
>gameport: CS4281 Gameport is pci0000:00:08.0/gameport0, speed 2386kHz
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 524280k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:524280k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>Registered led device: b43-phy0:tx
>Registered led device: b43-phy0:rx
>b43-phy0 debug: Chip initialized
>b43-phy0 debug: 30-bit DMA initialized
>input: Unspecified device as /class/input/input7
>b43-phy0 debug: Wireless interface started
>b43-phy0 debug: Adding Interface type 2
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>spurious 8259A interrupt: IRQ7.
>audit(1196591922.653:3): audit_pid=1611 old=0 by auid=4294967295
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:39:1d:ad:1b
>wlan0: RX authentication from 00:18:39:1d:ad:1b (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:39:1d:ad:1b
>wlan0: RX AssocResp from 00:18:39:1d:ad:1b (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:18:39:1d:ad:1b)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:18:39:1d:ad:1b
>b43-phy0 debug: Using hardware based encryption for keyidx: 1, mac: ff:ff:ff:ff:ff:ff
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 407751: 275031 | 275041 | 275051 | 275061