Attachment 276751 Details for Bug 377421 – dmsg result after the freeze

dmsg result after the freeze

dmesg (text/plain), 21.74 KB, created by Marco Maccaferri on 2007-12-04 09:18:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Marco Maccaferri

Created: 2007-12-04 09:18:36 UTC

Size: 21.74 KB

patch

obsolete

>Linux version 2.6.23.8-63.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Nov 21 17:56:40 EST 2007
>Command line: ro root=LABEL=/ norhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
> BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
> BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F7D00, 0014 (r0 K8T890)
>ACPI: RSDT 3FEE3040, 0030 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FEE30C0, 0074 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FEE3180, 74E6 (r1 K8T890 AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3FEE0000, 0040
>ACPI: MCFG 3FEEA780, 003C (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 3FEEA6C0, 0066 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>Scanning NUMA topology in Northbridge 24
>CPU has 1 num_cores
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fee0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003fee0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   261856
>On node 0 totalpages: 261759
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1316 pages reserved
>  DMA zone: 2627 pages, LIFO batch:0
>  DMA32 zone: 3524 pages used for memmap
>  DMA32 zone: 254236 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 256863
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/ norhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2200.073 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>CPU 0: aperture @ fed0000000 size 128 MB
>Aperture beyond 4GB. Ignoring.
>AGP bridge at 00:00:00
>Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
>Memory: 1024052k/1047424k available (2442k kernel code, 22984k reserved, 1381k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4403.39 BogoMIPS (lpj=2201699)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 28k freed
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12500437
>Detected 12.500 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2080 bytes
>Time:  9:00:25  Date: 12/04/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI: enabled onboard AC97/MC97 devices
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 6 7 10 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
>ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
>ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
>ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.1
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.3
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 128M @ 0xd0000000
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 32-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: ioport range 0x4000-0x407f has been reserved
>pnp: 00:01: ioport range 0x5000-0x500f has been reserved
>pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0e: iomem range 0xcf000-0xcffff has been reserved
>pnp: 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: b0000000-cfffffff
>  PREFETCH window: 40000000-400fffff
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.2
>  IO window: b000-bfff
>  MEM window: d8000000-d9ffffff
>  PREFETCH window: 40100000-401fffff
>PCI: Bridge: 0000:00:03.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 35
>PCI: Setting latency timer of device 0000:00:03.1 to 64
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 43
>PCI: Setting latency timer of device 0000:00:03.3 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3183k freed
>audit: initializing netlink socket (disabled)
>audit(1196758825.410:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 9DCF55F1CCB45E86
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:02:00.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.1:pcie00]
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.2:pcie00]
>PCI: Setting latency timer of device 0000:00:03.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.3:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (43 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x6
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>  Magic number: 3:251:19
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>Switched to high resolution mode on CPU 0
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xda006000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e800
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_via 0000:00:0f.0: version 2.3
>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 11
>scsi0 : sata_via
>scsi1 : sata_via
>ata1: SATA max UDMA/133 cmd 0x000000000001c000 ctl 0x000000000001c402 bmdma 0x000000000001d000 irq 20
>ata2: SATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001cc02 bmdma 0x000000000001d008 irq 20
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>ata1.00: ATA-7: Maxtor 6L160M0, BANC1G10, max UDMA/133
>ata1.00: 320173056 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>usb 3-2: configuration #1 chosen from 1 choice
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L160M0   BANC PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>pata_via 0000:00:0f.1: version 0.3.2
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
>scsi2 : pata_via
>scsi3 : pata_via
>ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001d800 irq 14
>ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001d808 irq 15
>ata3.00: ATAPI: ASUS    DRW-1608P, 1.17, max UDMA/66
>ata3.00: limited to UDMA/33 due to 40-wire cable
>ata3.00: configured for UDMA/33
>scsi 2:0:0:0: CD-ROM            ASUS     DRW-1608P        1.17 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1196758833.153:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 36 (level, low) -> IRQ 36
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>PCI: Disallowing DAC for device 0000:05:00.0
>sky2 0000:05:00.0: v1.18 addr 0xd9000000 irq 36 Yukon-EC (0xb6) rev 2
>APIC error on CPU0: 00(08)
>Linux video capture interface: v2.00
>sky2 0000:05:00.0: No interrupt generated using MSI, switching to INTx mode.
>sky2 eth0: addr 00:11:d8:b3:29:29
>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
>usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
>usbcore: registered new interface driver usblp
>firewire_ohci: Added fw-ohci device 0000:00:08.0, OHCI version 1.10
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>bttv: driver version 0.9.17 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16
>bttv0: Bt848 (rev 18) at 0000:00:0b.0, irq: 16, latency: 32, mmio: 0xda005000
>bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ff33ff [init]
>tveeprom 0-0050: Huh, no eeprom present (err=-121)?
>bttv0: tuner type unset
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>bttv0: registered device video0
>bttv0: registered device vbi0
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>input: PC Speaker as /class/input/input5
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 833kHz
>PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.6 to 64
>ACPI: PCI interrupt for device 0000:00:11.6 disabled
>VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1 across:2096472k
>Marking TSC unstable due to cpufreq changes
>Time: hpet clocksource has been installed.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>Clocksource tsc unstable (delta = -90903227 ns)
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1196758847.104:3): audit_pid=1661 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>input: Chicony USB Wireless HID Receiver as /class/input/input6
>input: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:10.2-1
>input: Chicony USB Wireless HID Receiver as /class/input/input7
>input,hiddev96: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:10.2-1
>input: Chicony USB Wireless HID Receiver as /class/input/input8
>input: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:10.2-1
>usb 1-6: new high speed USB device using ehci_hcd and address 4
>usb 1-6: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     Kingston DataTraveler II  1.13 PQ: 0 ANSI: 0 CCS
>sd 4:0:0:0: [sdb] 2014208 512-byte hardware sectors (1031 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sd 4:0:0:0: [sdb] 2014208 512-byte hardware sectors (1031 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 4:0:0:0: [sdb] Attached SCSI removable disk
>sd 4:0:0:0: Attached scsi generic sg2 type 0

Actions: View

Attachments on bug 377421: 255121 | 255131 | 255141 | 276751 | 320624