Attachment 276871 Details for Bug 410221 – messages from boot and resume, and output of lsusb

messages from boot and resume, and output of lsusb

resume-messages.log (text/plain), 52.14 KB, created by Mads Kiilerich on 2007-12-04 12:22:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mads Kiilerich

Created: 2007-12-04 12:22:06 UTC

Size: 52.14 KB

patch

obsolete

>from /var/log/messages
>
>
>Nov 28 12:50:59 localhost rsyslogd: [origin software="rsyslogd" swVersion="1.19.10" x-pid="1964"][x-configInfo udpReception="No" udpPort="514" tcpReception="No" tcpPort="0"] restart
>Nov 28 12:51:00 localhost kernel: rklogd 1.19.10, log source = /proc/kmsg started.
>Nov 28 12:51:00 localhost kernel: Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 21:41:26 EST 2007
>Nov 28 12:51:00 localhost kernel: BIOS-provided physical RAM map:
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 0000000000100000 - 000000007f5ffc00 (usable)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 000000007f5ffc00 - 000000007f601c00 (ACPI NVS)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 000000007f603c00 - 000000007f653c00 (reserved)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 000000007f653c00 - 000000007f655c00 (ACPI data)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 000000007f655c00 - 0000000080000000 (reserved)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
>Nov 28 12:51:00 localhost kernel:  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Nov 28 12:51:00 localhost kernel: 1141MB HIGHMEM available.
>Nov 28 12:51:00 localhost kernel: 896MB LOWMEM available.
>Nov 28 12:51:00 localhost kernel: found SMP MP-table at 000fe710
>Nov 28 12:51:00 localhost kernel: Using x86 segment limits to approximate NX protection
>Nov 28 12:51:00 localhost kernel: Zone PFN ranges:
>Nov 28 12:51:00 localhost kernel:   DMA             0 ->     4096
>Nov 28 12:51:00 localhost kernel:   Normal       4096 ->   229376
>Nov 28 12:51:00 localhost kernel:   HighMem    229376 ->   521727
>Nov 28 12:51:00 localhost kernel: Movable zone start PFN for each node
>Nov 28 12:51:00 localhost kernel: early_node_map[1] active PFN ranges
>Nov 28 12:51:00 localhost kernel:     0:        0 ->   521727
>Nov 28 12:51:00 localhost kernel: DMI 2.3 present.
>Nov 28 12:51:00 localhost kernel: Using APIC driver default
>Nov 28 12:51:00 localhost kernel: ACPI: RSDP 000FEBF0, 0024 (r2 DELL  )
>Nov 28 12:51:00 localhost kernel: ACPI: XSDT 000FCE90, 0084 (r1 DELL    B8K           14 ASL        61)
>Nov 28 12:51:00 localhost kernel: ACPI: FACP 000FCFB8, 00F4 (r3 DELL    B8K           14 ASL        61)
>Nov 28 12:51:00 localhost kernel: ACPI: DSDT FFF69C33, 4757 (r1   DELL    dt_ex     1000 INTL 20050624)
>Nov 28 12:51:00 localhost kernel: ACPI: FACS 7F5FFC00, 0040
>Nov 28 12:51:00 localhost kernel: ACPI: SSDT FFF6E4A9, 00AA (r1   DELL    st_ex     1000 INTL 20050624)
>Nov 28 12:51:00 localhost kernel: ACPI: APIC 000FD0AC, 0092 (r1 DELL    B8K           14 ASL        61)
>Nov 28 12:51:00 localhost kernel: ACPI: BOOT 000FD13E, 0028 (r1 DELL    B8K           14 ASL        61)
>Nov 28 12:51:00 localhost kernel: ACPI: ASF! 000FD166, 0092 (r32 DELL    B8K           14 ASL        61)
>Nov 28 12:51:00 localhost kernel: ACPI: MCFG 000FD1F8, 003E (r1 DELL    B8K           14 ASL        61)
>Nov 28 12:51:00 localhost kernel: ACPI: HPET 000FD236, 0038 (r1 DELL    B8K           14 ASL        61)
>Nov 28 12:51:00 localhost kernel: ACPI: TCPA 000FD492, 0032 (r1 DELL    B8K           14 ASL        61)
>Nov 28 12:51:00 localhost kernel: ACPI: SLIC 000FD26E, 0176 (r1 DELL    B8K           14 ASL        61)
>Nov 28 12:51:00 localhost kernel: ACPI: SSDT 7F5FFC40, 0175 (r1 DpgPmm  Cpu0Ist       11 INTL 20050624)
>Nov 28 12:51:00 localhost kernel: ACPI: SSDT 7F600049, 0175 (r1 DpgPmm  Cpu1Ist       11 INTL 20050624)
>Nov 28 12:51:00 localhost kernel: ACPI: SSDT 7F600452, 0140 (r1 DpgPmm    CpuPm       10 INTL 20050624)
>Nov 28 12:51:00 localhost kernel: ACPI: PM-Timer IO Port: 0x808
>Nov 28 12:51:00 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Nov 28 12:51:00 localhost kernel: Processor #0 15:6 APIC version 20
>Nov 28 12:51:00 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Nov 28 12:51:00 localhost kernel: Processor #1 15:6 APIC version 20
>Nov 28 12:51:00 localhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>Nov 28 12:51:00 localhost kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>Nov 28 12:51:00 localhost kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>Nov 28 12:51:00 localhost kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>Nov 28 12:51:00 localhost kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>Nov 28 12:51:00 localhost kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>Nov 28 12:51:00 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>Nov 28 12:51:00 localhost kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>Nov 28 12:51:00 localhost kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>Nov 28 12:51:00 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>Nov 28 12:51:00 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Nov 28 12:51:00 localhost kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Nov 28 12:51:00 localhost kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Nov 28 12:51:00 localhost kernel: Using ACPI (MADT) for SMP configuration information
>Nov 28 12:51:00 localhost kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>Nov 28 12:51:00 localhost kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000f0000
>Nov 28 12:51:00 localhost kernel: swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Nov 28 12:51:00 localhost kernel: Built 1 zonelists in Zone order.  Total pages: 517652
>Nov 28 12:51:00 localhost kernel: Kernel command line: ro root=LABEL=/ rhgb quiet
>Nov 28 12:51:00 localhost kernel: Enabling fast FPU save and restore... done.
>Nov 28 12:51:00 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
>Nov 28 12:51:00 localhost kernel: Initializing CPU#0
>Nov 28 12:51:00 localhost kernel: CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>Nov 28 12:51:00 localhost kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
>Nov 28 12:51:00 localhost kernel: Detected 2992.689 MHz processor.
>Nov 28 12:51:00 localhost kernel: Console: colour VGA+ 80x25
>Nov 28 12:51:00 localhost kernel: console [tty0] enabled
>Nov 28 12:51:00 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Nov 28 12:51:00 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Nov 28 12:51:00 localhost kernel: Memory: 2060332k/2086908k available (2184k kernel code, 25248k reserved, 1116k data, 280k init, 1169404k highmem)
>Nov 28 12:51:00 localhost kernel: virtual kernel memory layout:
>Nov 28 12:51:00 localhost kernel:     fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>Nov 28 12:51:00 localhost kernel:     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>Nov 28 12:51:00 localhost kernel:     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>Nov 28 12:51:00 localhost kernel:     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>Nov 28 12:51:00 localhost kernel:       .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>Nov 28 12:51:00 localhost kernel:       .data : 0xc0622165 - 0xc0739544   (1116 kB)
>Nov 28 12:51:00 localhost kernel:       .text : 0xc0400000 - 0xc0622165   (2184 kB)
>Nov 28 12:51:00 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Nov 28 12:51:00 localhost kernel: SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Nov 28 12:51:00 localhost kernel: Calibrating delay using timer specific routine.. 5989.37 BogoMIPS (lpj=2994689)
>Nov 28 12:51:00 localhost kernel: Security Framework v1.0.0 initialized
>Nov 28 12:51:00 localhost kernel: SELinux:  Initializing.
>Nov 28 12:51:00 localhost kernel: selinux_register_security:  Registering secondary module capability
>Nov 28 12:51:00 localhost kernel: Capability LSM initialized as secondary
>Nov 28 12:51:00 localhost kernel: Mount-cache hash table entries: 512
>Nov 28 12:51:00 localhost kernel: monitor/mwait feature present.
>Nov 28 12:51:00 localhost kernel: using mwait in idle threads.
>Nov 28 12:51:00 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
>Nov 28 12:51:00 localhost kernel: CPU: L2 cache: 2048K
>Nov 28 12:51:00 localhost kernel: CPU: Physical Processor ID: 0
>Nov 28 12:51:00 localhost kernel: CPU: Processor Core ID: 0
>Nov 28 12:51:00 localhost kernel: Intel machine check architecture supported.
>Nov 28 12:51:00 localhost kernel: Intel machine check reporting enabled on CPU#0.
>Nov 28 12:51:00 localhost kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>Nov 28 12:51:00 localhost kernel: CPU0: Thermal monitoring enabled
>Nov 28 12:51:00 localhost kernel: Compat vDSO mapped to ffffe000.
>Nov 28 12:51:00 localhost kernel: Checking 'hlt' instruction... OK.
>Nov 28 12:51:00 localhost kernel: SMP alternatives: switching to UP code
>Nov 28 12:51:00 localhost kernel: ACPI: Core revision 20070126
>Nov 28 12:51:00 localhost kernel: CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
>Nov 28 12:51:00 localhost kernel: SMP alternatives: switching to SMP code
>Nov 28 12:51:00 localhost kernel: Booting processor 1/1 eip 3000
>Nov 28 12:51:00 localhost kernel: CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Nov 28 12:51:00 localhost kernel: Initializing CPU#1
>Nov 28 12:51:00 localhost kernel: Calibrating delay using timer specific routine.. 5985.05 BogoMIPS (lpj=2992529)
>Nov 28 12:51:00 localhost kernel: monitor/mwait feature present.
>Nov 28 12:51:00 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
>Nov 28 12:51:00 localhost kernel: CPU: L2 cache: 2048K
>Nov 28 12:51:00 localhost kernel: CPU: Physical Processor ID: 0
>Nov 28 12:51:00 localhost kernel: CPU: Processor Core ID: 1
>Nov 28 12:51:00 localhost kernel: Intel machine check architecture supported.
>Nov 28 12:51:00 localhost kernel: Intel machine check reporting enabled on CPU#1.
>Nov 28 12:51:00 localhost kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>Nov 28 12:51:00 localhost kernel: CPU1: Thermal monitoring enabled
>Nov 28 12:51:00 localhost kernel: CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
>Nov 28 12:51:00 localhost kernel: Total of 2 processors activated (11974.43 BogoMIPS).
>Nov 28 12:51:00 localhost kernel: ENABLING IO-APIC IRQs
>Nov 28 12:51:00 localhost kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Nov 28 12:51:00 localhost kernel: checking TSC synchronization [CPU#0 -> CPU#1]:
>Nov 28 12:51:00 localhost kernel: Measured 30 cycles TSC warp between CPUs, turning off TSC clock.
>Nov 28 12:51:00 localhost kernel: Marking TSC unstable due to: check_tsc_sync_source failed.
>Nov 28 12:51:00 localhost kernel: Brought up 2 CPUs
>Nov 28 12:51:00 localhost kernel: Booting paravirtualized kernel on bare hardware
>Nov 28 12:51:00 localhost kernel: Time: 11:50:31  Date: 11/28/07
>Nov 28 12:51:00 localhost kernel: NET: Registered protocol family 16
>Nov 28 12:51:00 localhost kernel: No dock devices found.
>Nov 28 12:51:00 localhost kernel: ACPI: bus type pci registered
>Nov 28 12:51:00 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb56f, last bus=4
>Nov 28 12:51:00 localhost kernel: PCI: Using configuration type 1
>Nov 28 12:51:00 localhost kernel: Setting up standard PCI resources
>Nov 28 12:51:00 localhost kernel: ACPI: System BIOS is requesting _OSI(Linux)
>Nov 28 12:51:00 localhost kernel: ACPI: If "acpi_osi=Linux" works better,
>Nov 28 12:51:00 localhost kernel: Please send dmidecode to linux-acpi@vger.kernel.org
>Nov 28 12:51:00 localhost kernel: ACPI: Interpreter enabled
>Nov 28 12:51:00 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)
>Nov 28 12:51:00 localhost kernel: ACPI: Using IOAPIC for interrupt routing
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
>Nov 28 12:51:00 localhost kernel: PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>Nov 28 12:51:00 localhost kernel: PCI quirk: region 0880-08bf claimed by ICH6 GPIO
>Nov 28 12:51:00 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Nov 28 12:51:00 localhost kernel: ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -  00, should be 89 [20070126]
>Nov 28 12:51:00 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
>Nov 28 12:51:00 localhost kernel: pnp: PnP ACPI init
>Nov 28 12:51:00 localhost kernel: ACPI: bus type pnp registered
>Nov 28 12:51:00 localhost kernel: pnp: PnP ACPI: found 11 devices
>Nov 28 12:51:00 localhost kernel: ACPI: ACPI bus type pnp unregistered
>Nov 28 12:51:00 localhost kernel: usbcore: registered new interface driver usbfs
>Nov 28 12:51:00 localhost kernel: usbcore: registered new interface driver hub
>Nov 28 12:51:00 localhost kernel: usbcore: registered new device driver usb
>Nov 28 12:51:00 localhost kernel: PCI: Using ACPI for IRQ routing
>Nov 28 12:51:00 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Nov 28 12:51:00 localhost kernel: NetLabel: Initializing
>Nov 28 12:51:00 localhost kernel: NetLabel:  domain hash size = 128
>Nov 28 12:51:00 localhost kernel: NetLabel:  protocols = UNLABELED CIPSOv4
>Nov 28 12:51:00 localhost kernel: NetLabel:  unlabeled traffic allowed by default
>Nov 28 12:51:00 localhost kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>Nov 28 12:51:00 localhost kernel: hpet0: 3 64-bit timers, 14318180 Hz
>Nov 28 12:51:00 localhost kernel: Time: hpet clocksource has been installed.
>Nov 28 12:51:00 localhost kernel: Switched to high resolution mode on CPU 0
>Nov 28 12:51:00 localhost kernel: Switched to high resolution mode on CPU 1
>Nov 28 12:51:00 localhost kernel: pnp: 00:01: ioport range 0x800-0x85f has been reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:08: iomem range 0x100000-0xffffff could not be reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:08: iomem range 0x1000000-0x7f5ffbff could not be reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:08: iomem range 0xf0000-0xfffff could not be reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: ioport range 0x100-0x1fe has been reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: ioport range 0x200-0x277 has been reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: ioport range 0x280-0x2e7 has been reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: ioport range 0x300-0x377 has been reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: ioport range 0x380-0x3bb has been reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
>Nov 28 12:51:00 localhost kernel: pnp: 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
>Nov 28 12:51:00 localhost kernel: PCI: Bridge: 0000:00:01.0
>Nov 28 12:51:00 localhost kernel:   IO window: disabled.
>Nov 28 12:51:00 localhost kernel:   MEM window: dfc00000-dfcfffff
>Nov 28 12:51:00 localhost kernel:   PREFETCH window: disabled.
>Nov 28 12:51:00 localhost kernel: PCI: Bridge: 0000:00:1c.0
>Nov 28 12:51:00 localhost kernel:   IO window: disabled.
>Nov 28 12:51:00 localhost kernel:   MEM window: dfb00000-dfbfffff
>Nov 28 12:51:00 localhost kernel:   PREFETCH window: disabled.
>Nov 28 12:51:00 localhost kernel: PCI: Bridge: 0000:00:1c.4
>Nov 28 12:51:00 localhost kernel:   IO window: disabled.
>Nov 28 12:51:00 localhost kernel:   MEM window: dfa00000-dfafffff
>Nov 28 12:51:00 localhost kernel:   PREFETCH window: disabled.
>Nov 28 12:51:00 localhost kernel: PCI: Bridge: 0000:00:1e.0
>Nov 28 12:51:00 localhost kernel:   IO window: disabled.
>Nov 28 12:51:00 localhost kernel:   MEM window: disabled.
>Nov 28 12:51:00 localhost kernel:   PREFETCH window: disabled.
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>Nov 28 12:51:00 localhost kernel: NET: Registered protocol family 2
>Nov 28 12:51:00 localhost kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>Nov 28 12:51:00 localhost kernel: TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>Nov 28 12:51:00 localhost kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>Nov 28 12:51:00 localhost kernel: TCP: Hash tables configured (established 131072 bind 65536)
>Nov 28 12:51:00 localhost kernel: TCP reno registered
>Nov 28 12:51:00 localhost kernel: checking if image is initramfs... it is
>Nov 28 12:51:00 localhost kernel: Freeing initrd memory: 3590k freed
>Nov 28 12:51:00 localhost kernel: Simple Boot Flag at 0x7a set to 0x1
>Nov 28 12:51:00 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>Nov 28 12:51:00 localhost kernel: apm: disabled - APM is not SMP safe.
>Nov 28 12:51:00 localhost kernel: audit: initializing netlink socket (disabled)
>Nov 28 12:51:00 localhost kernel: audit(1196250632.397:1): initialized
>Nov 28 12:51:00 localhost kernel: highmem bounce pool size: 64 pages
>Nov 28 12:51:00 localhost kernel: Total HugeTLB memory allocated, 0
>Nov 28 12:51:00 localhost kernel: VFS: Disk quotas dquot_6.5.1
>Nov 28 12:51:00 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Nov 28 12:51:00 localhost kernel: ksign: Installing public key data
>Nov 28 12:51:00 localhost kernel: Loading keyring
>Nov 28 12:51:00 localhost kernel: - Added public key D5E5FC8EDCF186B6
>Nov 28 12:51:00 localhost kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
>Nov 28 12:51:00 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>Nov 28 12:51:00 localhost kernel: io scheduler noop registered
>Nov 28 12:51:00 localhost kernel: io scheduler anticipatory registered
>Nov 28 12:51:00 localhost kernel: io scheduler deadline registered
>Nov 28 12:51:00 localhost kernel: io scheduler cfq registered (default)
>Nov 28 12:51:00 localhost kernel: assign_interrupt_mode Found MSI capability
>Nov 28 12:51:09 localhost kernel:last message repeated 2 times
>Nov 28 12:51:00 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Nov 28 12:51:00 localhost kernel: ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>Nov 28 12:51:00 localhost kernel: ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>Nov 28 12:51:00 localhost kernel: isapnp: Scanning for PnP cards...
>Nov 28 12:51:00 localhost kernel: isapnp: No Plug & Play device found
>Nov 28 12:51:00 localhost kernel: Real Time Clock Driver v1.12ac
>Nov 28 12:51:00 localhost kernel: Non-volatile memory driver v1.2
>Nov 28 12:51:00 localhost kernel: Linux agpgart interface v0.102
>Nov 28 12:51:00 localhost kernel: agpgart: Detected an Intel 965Q Chipset.
>Nov 28 12:51:00 localhost kernel: agpgart: Detected 7676K stolen memory.
>Nov 28 12:51:00 localhost kernel: agpgart: AGP aperture is 256M @ 0xc0000000
>Nov 28 12:51:00 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Nov 28 12:51:00 localhost kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Nov 28 12:51:00 localhost kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Nov 28 12:51:00 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Nov 28 12:51:00 localhost kernel: input: Macintosh mouse button emulation as /class/input/input0
>Nov 28 12:51:00 localhost kernel: PNP: No PS/2 controller found. Probing ports directly.
>Nov 28 12:51:00 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>Nov 28 12:51:00 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>Nov 28 12:51:00 localhost kernel: mice: PS/2 mouse device common for all mice
>Nov 28 12:51:00 localhost kernel: cpuidle: using governor menu
>Nov 28 12:51:00 localhost kernel: usbcore: registered new interface driver hiddev
>Nov 28 12:51:00 localhost kernel: usbcore: registered new interface driver usbhid
>Nov 28 12:51:00 localhost kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>Nov 28 12:51:00 localhost kernel: TCP cubic registered
>Nov 28 12:51:00 localhost kernel: Initializing XFRM netlink socket
>Nov 28 12:51:00 localhost kernel: NET: Registered protocol family 1
>Nov 28 12:51:00 localhost kernel: NET: Registered protocol family 17
>Nov 28 12:51:00 localhost kernel: Using IPI No-Shortcut mode
>Nov 28 12:51:00 localhost kernel:   Magic number: 15:89:834
>Nov 28 12:51:00 localhost kernel: Freeing unused kernel memory: 280k freed
>Nov 28 12:51:00 localhost kernel: Write protecting the kernel read-only data: 845k
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 17
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1a.7: debug port 1
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1a.7: irq 17, io mem 0xdfdfbc00
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Nov 28 12:51:00 localhost kernel: usb usb1: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: hub 1-0:1.0: USB hub found
>Nov 28 12:51:00 localhost kernel: hub 1-0:1.0: 4 ports detected
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1d.7: debug port 1
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff980800
>Nov 28 12:51:00 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Nov 28 12:51:00 localhost kernel: usb usb2: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: hub 2-0:1.0: USB hub found
>Nov 28 12:51:00 localhost kernel: hub 2-0:1.0: 6 ports detected
>Nov 28 12:51:00 localhost kernel: USB Universal Host Controller Interface driver v3.0
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
>Nov 28 12:51:00 localhost kernel: usb usb3: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: hub 3-0:1.0: USB hub found
>Nov 28 12:51:00 localhost kernel: hub 3-0:1.0: 2 ports detected
>Nov 28 12:51:00 localhost kernel: usb 1-2: new high speed USB device using ehci_hcd and address 2
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 19
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000ff00
>Nov 28 12:51:00 localhost kernel: usb usb4: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: hub 4-0:1.0: USB hub found
>Nov 28 12:51:00 localhost kernel: hub 4-0:1.0: 2 ports detected
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80
>Nov 28 12:51:00 localhost kernel: usb usb5: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: hub 5-0:1.0: USB hub found
>Nov 28 12:51:00 localhost kernel: hub 5-0:1.0: 2 ports detected
>Nov 28 12:51:00 localhost kernel: usb 1-2: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: hub 1-2:1.0: USB hub found
>Nov 28 12:51:00 localhost kernel: hub 1-2:1.0: 7 ports detected
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
>Nov 28 12:51:00 localhost kernel: usb usb6: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: hub 6-0:1.0: USB hub found
>Nov 28 12:51:00 localhost kernel: hub 6-0:1.0: 2 ports detected
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>Nov 28 12:51:00 localhost kernel: uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40
>Nov 28 12:51:00 localhost kernel: usb usb7: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: hub 7-0:1.0: USB hub found
>Nov 28 12:51:00 localhost kernel: hub 7-0:1.0: 2 ports detected
>Nov 28 12:51:00 localhost kernel: SCSI subsystem initialized
>Nov 28 12:51:00 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21
>Nov 28 12:51:00 localhost kernel: scsi0 : ata_piix
>Nov 28 12:51:00 localhost kernel: scsi1 : ata_piix
>Nov 28 12:51:00 localhost kernel: ata1: SATA max UDMA/133 cmd 0x0001fe00 ctl 0x0001fe12 bmdma 0x0001fec0 irq 21
>Nov 28 12:51:00 localhost kernel: ata2: SATA max UDMA/133 cmd 0x0001fe20 ctl 0x0001fe32 bmdma 0x0001fec8 irq 21
>Nov 28 12:51:00 localhost kernel: usb 1-2.1: new low speed USB device using ehci_hcd and address 3
>Nov 28 12:51:00 localhost kernel: usb 1-2.1: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: input: Dell Premium USB Optical Mouse as /class/input/input1
>Nov 28 12:51:00 localhost kernel: input: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1a.7-2.1
>Nov 28 12:51:00 localhost kernel: ata1.00: ATA-7: ST3160812AS, 3.ADJ, max UDMA/133
>Nov 28 12:51:00 localhost kernel: ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
>Nov 28 12:51:00 localhost kernel: ata1.00: configured for UDMA/133
>Nov 28 12:51:00 localhost kernel: usb 1-2.2: new low speed USB device using ehci_hcd and address 4
>Nov 28 12:51:00 localhost kernel: usb 1-2.2: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: input: Dell Dell USB Keyboard as /class/input/input2
>Nov 28 12:51:00 localhost kernel: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-2.2
>Nov 28 12:51:00 localhost kernel: usb 1-2.4: new full speed USB device using ehci_hcd and address 5
>Nov 28 12:51:00 localhost kernel: usb 1-2.4: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: ata2.00: ATAPI: HL-DT-STDVD+-RW GSA-H31N, B109, max UDMA/100
>Nov 28 12:51:00 localhost kernel: usb 1-2.5: new low speed USB device using ehci_hcd and address 6
>Nov 28 12:51:00 localhost kernel: ata2.00: configured for UDMA/100
>Nov 28 12:51:00 localhost kernel: ata2: EH pending after completion, repeating EH (cnt=4)
>Nov 28 12:51:00 localhost kernel: scsi 0:0:0:0: Direct-Access     ATA      ST3160812AS      3.AD PQ: 0 ANSI: 5
>Nov 28 12:51:00 localhost kernel: sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>Nov 28 12:51:00 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
>Nov 28 12:51:00 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Nov 28 12:51:00 localhost kernel: sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>Nov 28 12:51:00 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
>Nov 28 12:51:00 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Nov 28 12:51:00 localhost kernel:  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>Nov 28 12:51:00 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
>Nov 28 12:51:00 localhost kernel: scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H31N B109 PQ: 0 ANSI: 5
>Nov 28 12:51:00 localhost kernel: ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>Nov 28 12:51:00 localhost kernel: usb 1-2.5: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: input: Composite USB PS2 Converter USB to PS2 Adaptor  V2.50 as /class/input/input3
>Nov 28 12:51:00 localhost kernel: input: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor  V2.50] on usb-0000:00:1a.7-2.5
>Nov 28 12:51:00 localhost kernel: input: Composite USB PS2 Converter USB to PS2 Adaptor  V2.50 as /class/input/input4
>Nov 28 12:51:00 localhost kernel: input: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor  V2.50] on usb-0000:00:1a.7-2.5
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 21
>Nov 28 12:51:00 localhost kernel: scsi2 : ata_piix
>Nov 28 12:51:00 localhost kernel: scsi3 : ata_piix
>Nov 28 12:51:00 localhost kernel: ata3: SATA max UDMA/133 cmd 0x0001fe40 ctl 0x0001fe52 bmdma 0x0001fed0 irq 21
>Nov 28 12:51:00 localhost kernel: ata4: SATA max UDMA/133 cmd 0x0001fe60 ctl 0x0001fe72 bmdma 0x0001fed8 irq 21
>Nov 28 12:51:00 localhost kernel: usb 1-2.6: new high speed USB device using ehci_hcd and address 7
>Nov 28 12:51:00 localhost kernel: usb 1-2.6: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: usb 1-2.7: new full speed USB device using ehci_hcd and address 8
>Nov 28 12:51:00 localhost kernel: usb 1-2.7: configuration #1 chosen from 1 choice
>Nov 28 12:51:00 localhost kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>Nov 28 12:51:00 localhost kernel: kjournald starting.  Commit interval 5 seconds
>Nov 28 12:51:00 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Nov 28 12:51:00 localhost kernel: SELinux:  Disabled at runtime.
>Nov 28 12:51:00 localhost kernel: audit(1196250639.321:2): selinux=0 auid=4294967295
>Nov 28 12:51:00 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
>Nov 28 12:51:00 localhost kernel: scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Nov 28 12:51:00 localhost kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Nov 28 12:51:00 localhost kernel: Uniform CD-ROM driver Revision: 3.20
>Nov 28 12:51:00 localhost kernel: tg3.c:v3.81 (September 5, 2007)
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>Nov 28 12:51:00 localhost kernel: eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:19:b9:27:b7:89
>Nov 28 12:51:00 localhost kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>Nov 28 12:51:00 localhost kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Nov 28 12:51:00 localhost kernel: usbcore: registered new interface driver usbserial
>Nov 28 12:51:00 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>Nov 28 12:51:00 localhost kernel: usbcore: registered new interface driver usbserial_generic
>Nov 28 12:51:00 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
>Nov 28 12:51:00 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
>Nov 28 12:51:00 localhost kernel: pl2303 1-2.7:1.0: pl2303 converter detected
>Nov 28 12:51:00 localhost kernel: usb 1-2.7: pl2303 converter now attached to ttyUSB0
>Nov 28 12:51:00 localhost kernel: usbcore: registered new interface driver pl2303
>Nov 28 12:51:00 localhost kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
>Nov 28 12:51:00 localhost kernel: input: Power Button (FF) as /class/input/input5
>Nov 28 12:51:00 localhost kernel: ACPI: Power Button (FF) [PWRF]
>Nov 28 12:51:00 localhost kernel: input: Power Button (CM) as /class/input/input6
>Nov 28 12:51:00 localhost kernel: ACPI: Power Button (CM) [VBTN]
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 21
>Nov 28 12:51:00 localhost kernel: iTCO_vendor_support: vendor-support=0
>Nov 28 12:51:00 localhost kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>Nov 28 12:51:00 localhost kernel: iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>Nov 28 12:51:00 localhost kernel: iTCO_wdt: No card detected
>Nov 28 12:51:00 localhost kernel: input: PC Speaker as /class/input/input7
>Nov 28 12:51:00 localhost kernel: parport_pc 00:06: reported by Plug and Play ACPI
>Nov 28 12:51:00 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>Nov 28 12:51:00 localhost kernel: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
>Nov 28 12:51:00 localhost kernel: usbcore: registered new interface driver usblp
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>Nov 28 12:51:00 localhost kernel: eth1: register 'asix' at usb-0000:00:1a.7-2.6, ASIX AX88772 USB 2.0 Ethernet, 00:06:07:14:05:28
>Nov 28 12:51:00 localhost kernel: usbcore: registered new interface driver asix
>Nov 28 12:51:00 localhost kernel: NET: Registered protocol family 10
>Nov 28 12:51:00 localhost kernel: lo: Disabled Privacy Extensions
>Nov 28 12:51:00 localhost kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>Nov 28 12:51:00 localhost kernel: mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
>Nov 28 12:51:00 localhost kernel: device-mapper: multipath: version 1.0.5 loaded
>Nov 28 12:51:00 localhost kernel: EXT3 FS on dm-0, internal journal
>Nov 28 12:51:00 localhost kernel: kjournald starting.  Commit interval 5 seconds
>Nov 28 12:51:00 localhost kernel: EXT3 FS on sda6, internal journal
>Nov 28 12:51:00 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Nov 28 12:51:00 localhost kernel: Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>Nov 28 12:51:00 localhost kernel: IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>Nov 28 12:51:00 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
>Nov 28 12:51:00 localhost kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
>Nov 28 12:51:00 localhost kernel: tg3: eth0: Flow control is on for TX and on for RX.
>Nov 28 12:51:00 localhost kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Nov 28 12:51:00 localhost kernel: audit(1196250658.545:3): audit_pid=1886 old=0 by auid=4294967295
>...
>
>
>
>
>
>...
>Dec  4 09:57:54 localhost kernel: Stopping tasks ... done.
>Dec  4 09:57:54 localhost kernel: Suspending console(s)
>Dec  4 09:57:54 localhost kernel: pl2303 1-2.7:1.0: no suspend for driver pl2303?
>Dec  4 09:57:54 localhost kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
>Dec  4 09:57:54 localhost kernel: sd 0:0:0:0: [sda] Stopping disk
>Dec  4 09:57:54 localhost kernel: pnp: Device 00:07 disabled.
>Dec  4 09:57:54 localhost kernel: pnp: Device 00:06 disabled.
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>Dec  4 09:57:54 localhost kernel: ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>Dec  4 09:57:54 localhost kernel: Disabling non-boot CPUs ...
>Dec  4 09:57:54 localhost kernel: Breaking affinity for irq 16
>Dec  4 09:57:54 localhost kernel: CPU 1 is now offline
>Dec  4 09:57:54 localhost kernel: SMP alternatives: switching to UP code
>Dec  4 09:57:54 localhost kernel: CPU1 is down
>Dec  4 09:57:54 localhost kernel: Intel machine check architecture supported.
>Dec  4 09:57:54 localhost kernel: Intel machine check reporting enabled on CPU#0.
>Dec  4 09:57:54 localhost kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>Dec  4 09:57:54 localhost kernel: CPU0: Thermal monitoring enabled
>Dec  4 09:57:54 localhost kernel: Enabling non-boot CPUs ...
>Dec  4 09:57:54 localhost kernel: SMP alternatives: switching to SMP code
>Dec  4 09:57:54 localhost kernel: Booting processor 1/1 eip 3000
>Dec  4 09:57:54 localhost kernel: CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Dec  4 09:57:54 localhost kernel: Initializing CPU#1
>Dec  4 09:57:54 localhost kernel: Calibrating delay using timer specific routine.. 5985.86 BogoMIPS (lpj=2992931)
>Dec  4 09:57:54 localhost kernel: monitor/mwait feature present.
>Dec  4 09:57:54 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
>Dec  4 09:57:54 localhost kernel: CPU: L2 cache: 2048K
>Dec  4 09:57:54 localhost kernel: CPU: Physical Processor ID: 0
>Dec  4 09:57:54 localhost kernel: CPU: Processor Core ID: 1
>Dec  4 09:57:54 localhost kernel: Intel machine check architecture supported.
>Dec  4 09:57:54 localhost kernel: Intel machine check reporting enabled on CPU#1.
>Dec  4 09:57:54 localhost kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>Dec  4 09:57:54 localhost kernel: CPU1: Thermal monitoring enabled
>Dec  4 09:57:54 localhost kernel: CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
>Dec  4 09:57:54 localhost kernel: CPU1 is up
>Dec  4 09:57:54 localhost kernel: Switched to high resolution mode on CPU 1
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>Dec  4 09:57:54 localhost kernel: PCI: Enabling device 0000:00:1a.0 (0000 -> 0001)
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>Dec  4 09:57:54 localhost kernel: usb usb3: root hub lost power or was reset
>Dec  4 09:57:54 localhost kernel: PCI: Enabling device 0000:00:1a.1 (0000 -> 0001)
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 19
>Dec  4 09:57:54 localhost kernel: usb usb4: root hub lost power or was reset
>Dec  4 09:57:54 localhost kernel: PCI: Enabling device 0000:00:1a.7 (0000 -> 0002)
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 17
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>Dec  4 09:57:54 localhost kernel: usb usb5: root hub lost power or was reset
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
>Dec  4 09:57:54 localhost kernel: usb usb6: root hub lost power or was reset
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>Dec  4 09:57:54 localhost kernel: usb usb7: root hub lost power or was reset
>Dec  4 09:57:54 localhost kernel: PCI: Enabling device 0000:00:1d.7 (0100 -> 0102)
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21
>Dec  4 09:57:54 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 21
>Dec  4 09:57:54 localhost kernel: tg3: eth0: Link is down.
>Dec  4 09:57:54 localhost kernel: pnp: Device 00:06 activated.
>Dec  4 09:57:54 localhost kernel: pnp: Device 00:07 activated.
>Dec  4 09:57:54 localhost kernel: ata2.00: configured for UDMA/100
>Dec  4 09:57:54 localhost kernel: ata2: EH pending after completion, repeating EH (cnt=4)
>Dec  4 09:57:54 localhost kernel: sd 0:0:0:0: [sda] Starting disk
>Dec  4 09:57:54 localhost kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
>Dec  4 09:57:54 localhost kernel: tg3: eth0: Flow control is on for TX and on for RX.
>Dec  4 09:57:54 localhost kernel: ata1.00: configured for UDMA/133
>Dec  4 09:57:54 localhost kernel: sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>Dec  4 09:57:54 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
>Dec  4 09:57:54 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Dec  4 09:57:54 localhost kernel: Restarting tasks ... <6>usb 1-2: USB disconnect, address 2
>Dec  4 09:57:54 localhost kernel: usb 1-2.1: USB disconnect, address 3
>Dec  4 09:57:54 localhost kernel: usb 1-2.2: USB disconnect, address 4
>Dec  4 09:57:54 localhost kernel: usb 1-2.3: USB disconnect, address 11
>Dec  4 09:57:54 localhost kernel: usb 1-2.4: USB disconnect, address 5
>Dec  4 09:57:54 localhost kernel: usblp0: removed
>Dec  4 09:57:54 localhost kernel: usb 1-2.5: USB disconnect, address 6
>Dec  4 09:57:54 localhost kernel: usb 1-2.6: USB disconnect, address 7
>Dec  4 09:57:54 localhost kernel: eth1: unregister 'asix' usb-0000:00:1a.7-2.6, ASIX AX88772 USB 2.0 Ethernet
>Dec  4 09:57:54 localhost kernel: done.
>Dec  4 09:57:54 localhost kernel: usb 1-2.7: USB disconnect, address 8
>Dec  4 09:57:54 localhost kernel: pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
>Dec  4 09:57:54 localhost kernel: pl2303 1-2.7:1.0: device disconnected
>Dec  4 09:57:54 localhost gnome-keyring-daemon[2479]: Credentials byte was not nul
>Dec  4 09:57:54 localhost kernel: usb 1-2: new high speed USB device using ehci_hcd and address 19
>Dec  4 09:57:54 localhost kernel: usb 1-2: configuration #1 chosen from 1 choice
>Dec  4 09:57:54 localhost kernel: hub 1-2:1.0: USB hub found
>Dec  4 09:57:54 localhost kernel: hub 1-2:1.0: 7 ports detected
>Dec  4 09:57:54 localhost gnome-power-manager: (mk) Resuming computer
>Dec  4 09:57:54 localhost gnome-power-manager: (mk) suspend failed
>Dec  4 09:57:54 localhost kernel: usb 1-2.1: new low speed USB device using ehci_hcd and address 20
>Dec  4 09:57:54 localhost gnome-keyring-daemon[2479]: Credentials byte was not nul
>Dec  4 09:57:54 localhost kernel: usb 1-2.1: configuration #1 chosen from 1 choice
>Dec  4 09:57:54 localhost kernel: input: Dell Premium USB Optical Mouse as /class/input/input8
>Dec  4 09:57:55 localhost kernel: input: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1a.7-2.1
>Dec  4 09:57:55 localhost kernel: usb 1-2.2: new low speed USB device using ehci_hcd and address 21
>Dec  4 09:57:55 localhost kernel: usb 1-2.2: configuration #1 chosen from 1 choice
>Dec  4 09:57:55 localhost kernel: input: Dell Dell USB Keyboard as /class/input/input9
>Dec  4 09:57:55 localhost kernel: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-2.2
>Dec  4 09:57:55 localhost kernel: usb 1-2.3: new high speed USB device using ehci_hcd and address 22
>Dec  4 09:57:55 localhost kernel: usb 1-2.3: configuration #1 chosen from 1 choice
>Dec  4 09:57:55 localhost kernel: scsi10 : SCSI emulation for USB Mass Storage devices
>Dec  4 09:57:55 localhost kernel: usb 1-2.4: new full speed USB device using ehci_hcd and address 23
>Dec  4 09:57:55 localhost kernel: usb 1-2.4: configuration #1 chosen from 1 choice
>Dec  4 09:57:55 localhost kernel: usblp0: USB Bidirectional printer dev 23 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
>Dec  4 09:57:55 localhost kernel: usb 1-2.5: new low speed USB device using ehci_hcd and address 24
>Dec  4 09:57:55 localhost kernel: usb 1-2.5: configuration #1 chosen from 1 choice
>Dec  4 09:57:55 localhost kernel: input: Composite USB PS2 Converter USB to PS2 Adaptor  V2.50 as /class/input/input10
>Dec  4 09:57:55 localhost kernel: input: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor  V2.50] on usb-0000:00:1a.7-2.5
>Dec  4 09:57:55 localhost kernel: input: Composite USB PS2 Converter USB to PS2 Adaptor  V2.50 as /class/input/input11
>Dec  4 09:57:55 localhost kernel: input: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor  V2.50] on usb-0000:00:1a.7-2.5
>Dec  4 09:57:55 localhost kernel: usb 1-2.6: new high speed USB device using ehci_hcd and address 25
>Dec  4 09:57:55 localhost kernel: usb 1-2.6: configuration #1 chosen from 1 choice
>Dec  4 09:57:56 localhost hald[2262]: forcibly attempting to lazy unmount /dev/sdb1 as enclosing drive was disconnected
>Dec  4 09:57:56 localhost kernel: eth1: register 'asix' at usb-0000:00:1a.7-2.6, ASIX AX88772 USB 2.0 Ethernet, 00:06:07:14:05:28
>Dec  4 09:57:56 localhost kernel: usb 1-2.7: new full speed USB device using ehci_hcd and address 26
>Dec  4 09:57:56 localhost kernel: usb 1-2.7: configuration #1 chosen from 1 choice
>Dec  4 09:57:56 localhost kernel: pl2303 1-2.7:1.0: pl2303 converter detected
>Dec  4 09:57:56 localhost kernel: usb 1-2.7: pl2303 converter now attached to ttyUSB0
>Dec  4 09:57:57 localhost acpid: client connected from 2428[0:0]
>Dec  4 09:57:57 localhost kernel: scsi 4:0:0:1: rejecting I/O to dead device
>Dec  4 09:57:57 localhost gnome-keyring-daemon[2479]: removing removable location: volume_uuid_AA75_852F
>Dec  4 09:57:57 localhost hald: unmounted /dev/sdb1 from '/media/REMOVABLE' on behalf of uid 0
>Dec  4 09:57:57 localhost hald[2262]: forcibly attempting to lazy unmount /dev/sr1 as enclosing drive was disconnected
>Dec  4 09:57:57 localhost kernel: scsi 4:0:0:0: rejecting I/O to dead device
>Dec  4 09:57:59 localhost kernel:last message repeated 2 times
>Dec  4 09:57:57 localhost gnome-keyring-daemon[2479]: removing removable location: volume_label_XXX
>Dec  4 09:57:57 localhost hald: unmounted /dev/sr1 from '/media/XXX' on behalf of uid 0
>Dec  4 09:57:59 localhost kernel: eth1: link down
>Dec  4 09:57:59 localhost kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
>Dec  4 09:58:00 localhost kernel: scsi 10:0:0:0: CD-ROM            UD-ROM           1.0F PQ: 0 ANSI: 2
>Dec  4 09:58:00 localhost kernel: scsi 10:0:0:1: Direct-Access     UD-RAM           1.0F PQ: 0 ANSI: 2
>Dec  4 09:58:00 localhost kernel: sr1: scsi3-mmc drive: 4x/200x writer cd/rw xa/form2 cdda caddy
>Dec  4 09:58:00 localhost kernel: sr 10:0:0:0: Attached scsi generic sg2 type 5
>Dec  4 09:58:00 localhost kernel: sd 10:0:0:1: [sdb] 97280 512-byte hardware sectors (50 MB)
>Dec  4 09:58:00 localhost kernel: sd 10:0:0:1: [sdb] Write Protect is off
>Dec  4 09:58:00 localhost kernel: sd 10:0:0:1: [sdb] Assuming drive cache: write through
>Dec  4 09:58:00 localhost kernel: sd 10:0:0:1: [sdb] 97280 512-byte hardware sectors (50 MB)
>Dec  4 09:58:00 localhost kernel: sd 10:0:0:1: [sdb] Write Protect is off
>Dec  4 09:58:00 localhost kernel: sd 10:0:0:1: [sdb] Assuming drive cache: write through
>Dec  4 09:58:00 localhost kernel:  sdb: sdb1
>Dec  4 09:58:00 localhost kernel: sd 10:0:0:1: [sdb] Attached SCSI removable disk
>Dec  4 09:58:00 localhost kernel: sd 10:0:0:1: Attached scsi generic sg3 type 0
>Dec  4 09:58:24 localhost hal_lpadmin: Added printer Unknown
>
>
>
>lsusb -s 1:23 -v
>
>
>Bus 001 Device 023: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.00
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0         8
>  idVendor           0x067b Prolific Technology, Inc.
>  idProduct          0x2305 PL2305 Parallel Port
>  bcdDevice            2.02
>  iManufacturer           1 Prolific Technology Inc.
>  iProduct                2 IEEE-1284 Controller
>  iSerial                 0 
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           78
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xa0
>      Remote Wakeup
>    MaxPower              100mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         7 Printer
>      bInterfaceSubClass      1 Printer
>      bInterfaceProtocol      1 Unidirectional
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x01  EP 1 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0040  1x 64 bytes
>        bInterval               0
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       1
>      bNumEndpoints           2
>      bInterfaceClass         7 Printer
>      bInterfaceSubClass      1 Printer
>      bInterfaceProtocol      2 Bidirectional
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x01  EP 1 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0040  1x 64 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x82  EP 2 IN
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0040  1x 64 bytes
>        bInterval               0
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       2
>      bNumEndpoints           3
>      bInterfaceClass       255 Vendor Specific Class
>      bInterfaceSubClass      0 
>      bInterfaceProtocol    255 
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x01  EP 1 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0040  1x 64 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x82  EP 2 IN
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0040  1x 64 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x83  EP 3 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0004  1x 4 bytes
>        bInterval               1

Actions: View

Attachments on bug 410221: 276871