Attachment 277021 Details for Bug 396481 – ups.conf

ups.conf

ups.conf (text/plain), 3.66 KB, created by Bruno Wolff III on 2007-12-04 13:56:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bruno Wolff III

Created: 2007-12-04 13:56:44 UTC

Size: 3.66 KB

patch

obsolete

># Network UPS Tools: example ups.conf
>#
># --- SECURITY NOTE ---
>#
># If you use snmp-ups and set a community string in here, you 
># will have to secure this file to keep other users from obtaining
># that string.  It needs to be readable by upsdrvctl and any drivers,
># and by upsd.
>#
># ---
>#
># This is where you configure all the UPSes that this system will be
># monitoring directly.  These are usually attached to serial ports, but
># USB devices and SNMP devices are also supported.
>#
># This file is used by upsdrvctl to start and stop your driver(s), and
># is also used by upsd to determine which drivers to monitor.  The 
># drivers themselves also read this file for configuration directives.
>#
># The general form is:
># 
># [upsname]
>#       driver = <drivername>
>#         port = <portname>
>#	< any other directives here >
>#
># The section header ([upsname]) can be just about anything as long as
># it is a single word inside brackets.  upsd uses this to uniquely 
># identify a UPS on this system.
>#
># If you have a UPS called snoopy, your section header would be "[snoopy]".
># On a system called "doghouse", the line in your upsmon.conf to monitor
># it would look something like this:
>#
># 	MONITOR snoopy@doghouse 1 upsmonuser mypassword master
>#
># It might look like this if monitoring in slave mode:
>#
># 	MONITOR snoopy@doghouse 1 upsmonuser mypassword slave
>#
># Configuration directives
># ------------------------
># 
># These directives are common to all drivers that support ups.conf:
>#
>#  driver: REQUIRED.  Specify the program to run to talk to this UPS.  
>#          apcsmart, bestups, and sec are some examples.
>#
>#    port: REQUIRED.  The serial port where your UPS is connected.  
>#          /dev/ttyS0 is usually the first port on Linux boxes, for example.
>#
># sdorder: optional.  When you have multiple UPSes on your system, you
>#          usually need to turn them off in a certain order.  upsdrvctl
>#          shuts down all the 0s, then the 1s, 2s, and so on.  To exclude
>#          a UPS from the shutdown sequence, set this to -1.
>#
>#          The default value for this parameter is 0.
>#
>#  nolock: optional, and not recommended for use in this file.
>#
>#          If you put nolock in here, the driver will not lock the
>#          serial port every time it starts.  This may allow other 
>#          processes to seize the port if you start more than one by 
>#          mistake.
>#
>#          This is only intended to be used on systems where locking
>#          absolutely must be disabled for the software to work.
>#
># maxstartdelay: optional.  This can be set as a global variable
>#                above your first UPS definition and it can also be
>#                set in a UPS section.  This value controls how long
>#                upsdrvctl will wait for the driver to finish starting.
>#                This keeps your system from getting stuck due to a
>#                broken driver or UPS.
>#
>#                The default is 45 seconds.
>#
>#
># Anything else is passed through to the hardware-specific part of
># the driver.
># 
># Examples
># --------
>#
># A simple example for a UPS called "powerpal" that uses the megatec
># driver on /dev/ttyS0 is:
>#
># [powerpal]
>#	driver = megatec
>#	port = /dev/ttyS0
>#	desc = "Web server"
>#
># If your UPS driver requires additional settings, you can specify them
># here.  For example, if it supports a setting of "1234" for the
># variable "cable", it would look like this:
># 
># [myups]
># 	driver = mydriver
>#	port = /dev/ttyS1
>#	cable = 1234
>#	desc = "Something descriptive"
>#
># To find out if your driver supports any extra settings, start it with
># the -h option and/or read the driver's documentation.
>
>[ups]
>      driver = usbhid-ups
>      desc = "bruno.wolff.to"
>      port = auto

Actions: View

Attachments on bug 396481: 277021