Attachment 277621 Details for Bug 394981 – T170 thin client

T170 thin client

t170.txt (text/plain), 28.29 KB, created by Warren Togami on 2007-12-05 05:41:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Warren Togami

Created: 2007-12-05 05:41:34 UTC

Size: 28.29 KB

patch

obsolete

>lspci -vv
>00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
>	Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 8
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
>	Capabilities: [a0] AGP version 2.0
>		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
>		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Memory behind bridge: e8000000-e9ffffff
>	Prefetchable memory behind bridge: e4000000-e7ffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
>	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at d000 [size=256]
>	Region 1: Memory at eb000000 (32-bit, non-prefetchable) [size=256]
>	[virtual] Expansion ROM at 10000000 [disabled] [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 4: I/O ports at d800 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 10
>	Region 4: I/O ports at dc00 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin C routed to IRQ 11
>	Region 4: I/O ports at e000 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
>	Subsystem: VIA Technologies, Inc. USB 2.0
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin D routed to IRQ 10
>	Region 0: Memory at eb007000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
>	Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
>	Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Interrupt: pin A routed to IRQ 11
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
>	Region 4: I/O ports at e400 [size=16]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
>	Subsystem: VIA Technologies, Inc. K7VT2 motherboard
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin C routed to IRQ 11
>	Region 0: I/O ports at e800 [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03) (prog-if 00 [VGA])
>	Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (500ns min)
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
>	Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
>	[virtual] Expansion ROM at e9000000 [disabled] [size=64K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [70] AGP version 2.0
>		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
>		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
>
>lspci -vvn
>00:00.0 0600: 1106:3123
>	Subsystem: 1106:3123
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 8
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
>	Capabilities: [a0] AGP version 2.0
>		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
>		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:01.0 0604: 1106:b091 (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Memory behind bridge: e8000000-e9ffffff
>	Prefetchable memory behind bridge: e4000000-e7ffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:09.0 0200: 10ec:8139 (rev 20)
>	Subsystem: 10ec:8139
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at d000 [size=256]
>	Region 1: Memory at eb000000 (32-bit, non-prefetchable) [size=256]
>	[virtual] Expansion ROM at 10000000 [disabled] [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.0 0c03: 1106:3038 (rev 80) (prog-if 00 [UHCI])
>	Subsystem: 1106:3038
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 4: I/O ports at d800 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.1 0c03: 1106:3038 (rev 80) (prog-if 00 [UHCI])
>	Subsystem: 1106:3038
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 10
>	Region 4: I/O ports at dc00 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.2 0c03: 1106:3038 (rev 80) (prog-if 00 [UHCI])
>	Subsystem: 1106:3038
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin C routed to IRQ 11
>	Region 4: I/O ports at e000 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.3 0c03: 1106:3104 (rev 82) (prog-if 20 [EHCI])
>	Subsystem: 1106:3104
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin D routed to IRQ 10
>	Region 0: Memory at eb007000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:11.0 0601: 1106:3177
>	Subsystem: 1106:3177
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:11.1 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
>	Subsystem: 1106:0571
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Interrupt: pin A routed to IRQ 11
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
>	Region 4: I/O ports at e400 [size=16]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:11.5 0401: 1106:3059 (rev 50)
>	Subsystem: 1106:4161
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin C routed to IRQ 11
>	Region 0: I/O ports at e800 [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:00.0 0300: 1106:3122 (rev 03) (prog-if 00 [VGA])
>	Subsystem: 1106:3122
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (500ns min)
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
>	Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
>	[virtual] Expansion ROM at e9000000 [disabled] [size=64K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [70] AGP version 2.0
>		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
>		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
>
>
>dmesg
>Linux version 2.6.23.9-67.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Nov 27 22:11:43 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
> BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
> BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>223MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 57328) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    57328
>  HighMem     57328 ->    57328
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->    57328
>On node 0 totalpages: 57328
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 415 pages used for memmap
>  Normal zone: 52817 pages, LIFO batch:15
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F6980, 0014 (r0 CLE266)
>ACPI: RSDT 0DFF3000, 0028 (r1 CLE266 AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 0DFF3040, 0074 (r1 CLE266 AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 0DFF30C0, 3167 (r1 CLE266 AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 0DFF0000, 0040
>ACPI: PM-Timer IO Port: 0x4008
>Allocating PCI resources starting at 10000000 (gap: 0e000000:f1ff0000)
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 56881
>Kernel command line: rw initrd=initrd.lts selinux=0 sysrq_always_enabled=1 vga=1 BOOT_IMAGE=vmlinuz.ltsp auto
>debug: sysrq always enabled.
>No local APIC present or hardware disabled
>mapped APIC to ffffb000 (011cc000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Detected 995.152 MHz processor.
>Console: colour VGA+ 80x50
>console [tty0] enabled
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 214900k/229312k available (2184k kernel code, 13736k reserved, 1116k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc52000 - 0xfffff000   (3764 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xce800000 - 0xff7fe000   ( 783 MB)
>    lowmem  : 0xc0000000 - 0xcdff0000   ( 223 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622365 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622365   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1991.81 BogoMIPS (lpj=995908)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0381b83f 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
>CPU: L2 Cache: 64K (32 bytes/line)
>CPU: After all inits, caps: 0381b13f 00000000 00000000 00000000 00000000 000000dd 00000000 00000000
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e20)
>CPU0: Centaur VIA Nehemiah stepping 08
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  7:59:16  Date: 12/05/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 4000-407f claimed by vt8235 PM
>PCI quirk: region 5000-500f claimed by vt8235 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 32-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0xda000-0xdbfff has been reserved
>pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x4000-0x407f has been reserved
>pnp: 00:02: ioport range 0x5000-0x500f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: e4000000-e7ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 98304 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 7252k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1196841558.491:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 9437FEB87930FB56
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: Thermal Zone [THRM] (33 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected VIA CLE266 chipset
>agpgart: AGP aperture is 64M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:594:975
>  hash matches device PNP0C0E:00
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.3: irq 10, io mem 0xeb007000
>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 10, io base 0x0000dc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: VIA VLink IRQ fixup for 0000:00:10.2, from 5 to 11
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>8139too Fast Ethernet driver 0.9.28
>8139too 0000:00:09.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip
>8139too 0000:00:09.0: Use the "8139cp" driver for improved performance and stability.
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>8139too 0000:00:09.0: unknown chip version, assuming RTL-8139
>8139too 0000:00:09.0: TxConfig = 0x74800000
>eth0: RealTek RTL8139 at 0xce850000, 00:13:90:00:3d:9d, IRQ 10
>eth0:  Identified 8139 chip type 'RTL-8139'
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>usb 2-2: configuration #1 chosen from 1 choice
>input: Logitech Trackball as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:10.0-2
>NET: Registered protocol family 23
>eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
>SCSI subsystem initialized
>input: PC Speaker as /class/input/input3
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>libata version 2.21 loaded.
>pata_via 0000:00:11.1: version 0.3.2
>ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001e400 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001e408 irq 15
>ata2: port disabled. ignoring.
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: VIA VLink IRQ fixup for 0000:00:11.5, from 5 to 11
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized via 2.11.1 20070202 on minor 0
>mtrr: base(0xe4000000) is not aligned on a size(0x2080000) boundary
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>eth0: no IPv6 routers present
>
>/proc/cpuinfo
>processor	: 0
>vendor_id	: CentaurHauls
>cpu family	: 6
>model		: 9
>model name	: VIA Nehemiah
>stepping	: 8
>cpu MHz		: 995.152
>cache size	: 64 KB
>fdiv_bug	: no
>hlt_bug		: no
>f00f_bug	: no
>coma_bug	: no
>fpu		: yes
>fpu_exception	: yes
>cpuid level	: 1
>wp		: yes
>flags		: fpu vme de pse tsc msr cx8 mtrr pge cmov pat mmx fxsr sse up rng rng_en ace ace_en
>bogomips	: 1991.81
>clflush size	: 32
>

Actions: View

Attachments on bug 394981: 266371 | 269721 | 270441 | 271591 | 273401 | 273411 | 277621 | 278901 | 280221