Attachment 278981 Details for Bug 413291 – Full dmesg output

Full dmesg output

dmesg.out (text/plain), 25.70 KB, created by mvtodevnull on 2007-12-06 01:34:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mvtodevnull

Created: 2007-12-06 01:34:18 UTC

Size: 25.70 KB

patch

obsolete

>Linux version 2.6.23.8-63.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Nov 21 17:56:40 EST 2007
>Command line: ro root=LABEL=/ rhgb quiet noapic
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fe70000 (usable)
> BIOS-e820: 000000002fe70000 - 000000002fe80000 (ACPI data)
> BIOS-e820: 000000002fe80000 - 000000002ff00000 (ACPI NVS)
> BIOS-e820: 000000002ff00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 196208) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F8500, 0014 (r0 PTLTD )
>ACPI: RSDT 2FE79528, 0040 (r1 DELL    M08      6040000  LTP        0)
>ACPI: FACP 2FE7FB58, 0074 (r1 ATI    Bowfin    6040000 ATI     F4240)
>ACPI: DSDT 2FE79568, 65F0 (r1    ATI    SB600  6040000 MSFT  3000000)
>ACPI: FACS 2FE90FC0, 0040
>ACPI: TCPA 2FE7FBCC, 0032 (r2 AMD              6040000 PTEC        0)
>ACPI: SSDT 2FE7FBFE, 01C4 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ACPI: APIC 2FE7FDC2, 0054 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: MCFG 2FE7FE16, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
>ACPI: HPET 2FE7FE52, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
>ACPI: SLIC 2FE7FE8A, 0176 (r1 DELL    M08      6040000  LTP        0)
>Scanning NUMA topology in Northbridge 24
>CPU has 2 num_cores
>No NUMA configuration found
>Faking a node at 0000000000000000-000000002fe70000
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 196208) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000002fe70000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      157
>    0:      256 ->   196208
>On node 0 totalpages: 196109
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1317 pages reserved
>  DMA zone: 2624 pages, LIFO batch:0
>  DMA32 zone: 2626 pages used for memmap
>  DMA32 zone: 189486 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>ACPI: HPET id: 0x43538301 base: 0xfed00000
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>MPTABLE: OEM ID: AMD      MPTABLE: Product ID: POOH         MPTABLE: APIC at: 0xFEE00000
>I/O APIC #2 at 0xFEC00000.
>Setting APIC routing to flat
>Processors: 2
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
>swsusp: Registered nosave memory region: 00000000000ce000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 192110
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/ rhgb quiet noapic
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>hpet clockevent registered
>TSC calibrated against HPET
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1700.067 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>CPU 0: aperture @ 9a0a000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 764988k/784832k available (2442k kernel code, 19448k reserved, 1381k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3402.52 BogoMIPS (lpj=1701262)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e00)
>Using local APIC timer interrupts.
>APIC timer calibration result 12500503
>Detected 12.500 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3400.10 BogoMIPS (lpj=1700052)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
>AMD C1E detected late. Force timer broadcast.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2080 bytes
>Time:  1:17:06  Date: 12/06/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: If "acpi_osi=Linux" works better,
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *9
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
>Could not switch to high resolution mode on CPU 0
> lapic is not functional.
>Could not switch to high resolution mode on CPU 1
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0x0-0x0 could not be reserved
>pnp: 00:01: iomem range 0x0-0x0 could not be reserved
>pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
>pnp: 00:08: ioport range 0x220-0x22f has been reserved
>pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:09: iomem range 0xc0004800-0xc0004bff has been reserved
>pnp: 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: b0100000-b01fffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: b0200000-b02fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: disabled.
>  MEM window: b0300000-b03fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3186k freed
>audit: initializing netlink socket (disabled)
>audit(1196903825.470:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 9DCF55F1CCB45E86
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. MSI deactivated.
>Boot video device is 0000:01:05.0
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie02]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (64 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>spurious 8259A interrupt: IRQ7.
>Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
>Could not switch to high resolution mode on CPU 1
> lapic is not functional.
>Could not switch to high resolution mode on CPU 0
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 processors (2 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0x9 (1700 MHz), vid 0x13
>powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x14
>powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x1a
>  Magic number: 3:309:255
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>ACPI: Unable to derive IRQ for device 0000:00:13.5
>ACPI: PCI Interrupt 0000:00:13.5[D]: no GSI - using IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 11, io mem 0xb0004400
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 11, io mem 0xb0005000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: Unable to derive IRQ for device 0000:00:13.1
>ACPI: PCI Interrupt 0000:00:13.1[B]: no GSI - using IRQ 11
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 11, io mem 0xb0006000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: Unable to derive IRQ for device 0000:00:13.2
>ACPI: PCI Interrupt 0000:00:13.2[C]: no GSI - using IRQ 11
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 11, io mem 0xb0007000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: Unable to derive IRQ for device 0000:00:13.3
>ACPI: PCI Interrupt 0000:00:13.3[B]: no GSI - using IRQ 11
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 11, io mem 0xb0008000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: Unable to derive IRQ for device 0000:00:13.4
>ACPI: PCI Interrupt 0000:00:13.4[C]: no GSI - using IRQ 11
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 11, io mem 0xb0009000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:12.0: version 2.3
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc20000606100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 11
>ata2: SATA max UDMA/133 cmd 0xffffc20000606180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 11
>ata3: SATA max UDMA/133 cmd 0xffffc20000606200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 11
>ata4: SATA max UDMA/133 cmd 0xffffc20000606280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 11
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: ST980811AS, 3.CDD, max UDMA/133
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      ST980811AS       3.CD PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:14.1 to 64
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000018420 irq 14
>ata6: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000018428 irq 15
>ata5.00: ATAPI: CD-RW/DVD-ROM DW224EV, D.CF, max UDMA/33
>ata5.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            TEAC     CDRWDVD DW224EV  D.CF PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  8 users, 11 roles, 2356 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 212210 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda7, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1196903835.882:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /class/input/input3
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>ssb: SPROM revision 2 detected.
>ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:08:00.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>ACPI: Battery Slot [BAT1] (battery present)
>ssb: SPROM revision 16 detected.
>ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:84:ed:f5
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19)
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:08:01.0[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>mmc0: SDHCI at 0xb0302000 irq 10 DMA
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>b43-phy0: Broadcom 4311 WLAN found
>b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>phy0: Selected rate control algorithm 'simple'
>ACPI: PCI Interrupt 0000:00:14.2[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda7, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda8, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>Adding 2032180k swap on /dev/sda5.  Priority:-1 extents:1 across:2032180k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Clocksource tsc unstable (delta = -177801254 ns)
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (6144 buckets, 24576 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>Registered led device: b43-phy0:tx
>Registered led device: b43-phy0:rx
>b43-phy0 debug: Chip initialized
>b43-phy0 debug: 32-bit DMA initialized
>input: Unspecified device as /class/input/input9
>b43-phy0 debug: Wireless interface started
>b43-phy0 debug: Adding Interface type 2
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:09:5b:70:2d:68
>wlan0: RX authentication from 00:09:5b:70:2d:68 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:09:5b:70:2d:68
>wlan0: RX AssocResp from 00:09:5b:70:2d:68 (capab=0x5 status=0 aid=5)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>audit(1196903868.340:3): audit_pid=1969 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>wlan0: no IPv6 routers present
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>b43-phy0 debug: Removing Interface type 2
>b43-phy0 debug: Wireless interface stopped
>b43-phy0 debug: DMA-32 0x0200 (RX) max used slots: 1/64
>b43-phy0 debug: DMA-32 0x0220 (TX) max used slots: 20/128
>b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>Registered led device: b43-phy0:tx
>Registered led device: b43-phy0:rx
>b43-phy0 debug: Chip initialized
>b43-phy0 debug: 32-bit DMA initialized
>input: Unspecified device as /class/input/input10
>b43-phy0 debug: Wireless interface started
>b43-phy0 debug: Adding Interface type 2
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:09:5b:70:2d:68
>wlan0: RX authentication from 00:09:5b:70:2d:68 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:09:5b:70:2d:68
>wlan0: RX AssocResp from 00:09:5b:70:2d:68 (capab=0x5 status=0 aid=5)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>wlan0: no IPv6 routers present
>hda-intel: Invalid position buffer, using LPIB read method instead.
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:09:5b:70:2d:68
>wlan0: RX authentication from 00:09:5b:70:2d:68 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:09:5b:70:2d:68
>wlan0: RX ReassocResp from 00:09:5b:70:2d:68 (capab=0x5 status=0 aid=6)
>wlan0: associated
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:09:5b:70:2d:68
>wlan0: RX authentication from 00:09:5b:70:2d:68 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:09:5b:70:2d:68
>wlan0: RX ReassocResp from 00:09:5b:70:2d:68 (capab=0x5 status=0 aid=7)
>wlan0: associated
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 413291: 278981 | 280501