Attachment 281581 Details for Bug 375821 – output of dmesg (kernel-2.6.23.8-63)

output of dmesg (kernel-2.6.23.8-63)

dmesg.output (text/plain), 27.56 KB, created by Bernd Bartmann on 2007-12-07 21:20:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bernd Bartmann

Created: 2007-12-07 21:20:29 UTC

Size: 27.56 KB

patch

obsolete

>Linux version 2.6.23.8-63.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Nov 21 18:51:08 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d6000 - 00000000000e0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
> BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fb990
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262128) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262128
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262128
>On node 0 totalpages: 262128
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32497 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: VIA      Product ID: VT5440B      APIC at: 0xFEE00000
>Processor #0 6:10 APIC version 17
>I/O APIC #2 Version 3 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 1
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d6000
>swsusp: Registered nosave memory region: 00000000000d6000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 260081
>Kernel command line: ro root=/dev/md0 acpi=off noapic rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2104.759 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031180k/1048512k available (2184k kernel code, 16604k reserved, 1116k data, 280k init, 131008k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622245 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622245   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4212.09 BogoMIPS (lpj=2106047)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>CPU0: AMD Athlon(tm) XP 3000+ stepping 00
>Total of 1 processors activated (4212.09 BogoMIPS).
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 22:08:04  Date: 12/07/07
>NET: Registered protocol family 16
>ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7CC2000 could not acquire Mutex [1] [20070126]
>No dock devices found.
>PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>Force enabled HPET at base address 0xfed00000
>PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
>PCI: setting IRQ 11 as level-triggered
>PCI: Found IRQ 11 for device 0000:00:0f.1
>PCI: Sharing IRQ 11 with 0000:00:05.0
>PCI: Sharing IRQ 11 with 0000:00:10.0
>PCI: Sharing IRQ 11 with 0000:00:10.1
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 32-bit timers, 14318180 Hz
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: cfd00000-d3dfffff
>  PREFETCH window: afc00000-cfbfffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>Time: tsc clocksource has been installed.
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3129k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>audit: initializing netlink socket (disabled)
>audit(1197065284.445:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key AD2F53515391081
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Switched to high resolution mode on CPU 0
>0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
>PCI: Bypassing VIA 8237 APIC De-Assert Message
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected VIA KT400/KT400A/KT600 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 6a0 not supported
>Using IPI No-Shortcut mode
>  Magic number: 3:960:147
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>PCI: setting IRQ 5 as level-triggered
>PCI: Found IRQ 5 for device 0000:00:10.4
>PCI: Sharing IRQ 5 with 0000:00:08.0
>PCI: Sharing IRQ 5 with 0000:00:08.2
>PCI: Sharing IRQ 5 with 0000:00:08.4
>PCI: Sharing IRQ 5 with 0000:00:0b.0
>PCI: Sharing IRQ 5 with 0000:00:11.5
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 5, io mem 0xdffff800
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>PCI: Found IRQ 11 for device 0000:00:10.0
>PCI: Sharing IRQ 11 with 0000:00:05.0
>PCI: Sharing IRQ 11 with 0000:00:0f.1
>PCI: Sharing IRQ 11 with 0000:00:10.1
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000b000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PCI: Found IRQ 11 for device 0000:00:10.1
>PCI: Sharing IRQ 11 with 0000:00:05.0
>PCI: Sharing IRQ 11 with 0000:00:0f.1
>PCI: Sharing IRQ 11 with 0000:00:10.0
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 11, io base 0x0000b400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PCI: Found IRQ 5 for device 0000:00:10.2
>PCI: Sharing IRQ 5 with 0000:00:0a.0
>PCI: Sharing IRQ 5 with 0000:00:0a.2
>PCI: Sharing IRQ 5 with 0000:00:0a.4
>PCI: Sharing IRQ 5 with 0000:00:0e.0
>PCI: Sharing IRQ 5 with 0000:00:0f.0
>PCI: Sharing IRQ 5 with 0000:00:10.3
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 5, io base 0x0000b800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>PCI: Found IRQ 5 for device 0000:00:10.3
>PCI: Sharing IRQ 5 with 0000:00:0a.0
>PCI: Sharing IRQ 5 with 0000:00:0a.2
>PCI: Sharing IRQ 5 with 0000:00:0a.4
>PCI: Sharing IRQ 5 with 0000:00:0e.0
>PCI: Sharing IRQ 5 with 0000:00:0f.0
>PCI: Sharing IRQ 5 with 0000:00:10.2
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 5, io base 0x0000bc00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  2152.000 MB/sec
>xor: using function: pIII_sse (2152.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int32x1    726 MB/s
>raid6: int32x2    886 MB/s
>raid6: int32x4    800 MB/s
>raid6: int32x8    761 MB/s
>raid6: mmxx1     1738 MB/s
>raid6: mmxx2     3074 MB/s
>raid6: sse1x1    1597 MB/s
>raid6: sse1x2    2347 MB/s
>raid6: using algorithm sse1x2 (2347 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>input: PS/2 Generic Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_via 0000:00:0f.0: version 2.3
>PCI: Found IRQ 5 for device 0000:00:0f.0
>PCI: Sharing IRQ 5 with 0000:00:0a.0
>PCI: Sharing IRQ 5 with 0000:00:0a.2
>PCI: Sharing IRQ 5 with 0000:00:0a.4
>PCI: Sharing IRQ 5 with 0000:00:0e.0
>PCI: Sharing IRQ 5 with 0000:00:10.3
>PCI: Sharing IRQ 5 with 0000:00:10.2
>sata_via 0000:00:0f.0: routed to hard irq line 5
>scsi0 : sata_via
>scsi1 : sata_via
>ata1: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d002 bmdma 0x0001c400 irq 5
>ata2: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c802 bmdma 0x0001c408 irq 5
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: WDC WD3000JS-00PDB0, 21.00M21, max UDMA/133
>ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/1)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-6: WDC WD3000JD-00KLB0, 08.05J08, max UDMA/100
>ata2.00: 586072368 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3000JS-00P 21.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD3000JD-00K 08.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sata_sil 0000:00:05.0: version 2.3
>PCI: Found IRQ 11 for device 0000:00:05.0
>PCI: Sharing IRQ 11 with 0000:00:0f.1
>PCI: Sharing IRQ 11 with 0000:00:10.1
>PCI: Sharing IRQ 11 with 0000:00:10.0
>sata_sil 0000:00:05.0: Applying R_ERR on DMA activate FIS errata fix
>scsi2 : sata_sil
>scsi3 : sata_sil
>scsi4 : sata_sil
>scsi5 : sata_sil
>ata3: SATA max UDMA/100 cmd 0xf882ec80 ctl 0xf882ec8a bmdma 0xf882ec00 irq 11
>ata4: SATA max UDMA/100 cmd 0xf882ecc0 ctl 0xf882ecca bmdma 0xf882ec08 irq 11
>ata5: SATA max UDMA/100 cmd 0xf882ee80 ctl 0xf882ee8a bmdma 0xf882ee00 irq 11
>ata6: SATA max UDMA/100 cmd 0xf882eec0 ctl 0xf882eeca bmdma 0xf882ee08 irq 11
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: ATA-7: Maxtor 7Y250M0, YAR51HW0, max UDMA/133
>ata3.00: 490234752 sectors, multi 0: LBA48 
>ata3.00: configured for UDMA/100
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata4.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133
>ata4.00: 490234752 sectors, multi 0: LBA48 
>ata4.00: configured for UDMA/100
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata5.00: ATA-7: Maxtor 7Y250M0, YAR51HW0, max UDMA/133
>ata5.00: 490234752 sectors, multi 0: LBA48 
>ata5.00: configured for UDMA/100
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata6.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133
>ata6.00: 490234752 sectors, multi 0: LBA48 
>ata6.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 7Y250M0   YAR5 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      Maxtor 7Y250M0   YAR5 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 490234752 512-byte hardware sectors (251000 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 490234752 512-byte hardware sectors (251000 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:0:0: [sdd] Attached SCSI disk
>scsi 4:0:0:0: Direct-Access     ATA      Maxtor 7Y250M0   YAR5 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sde] 490234752 512-byte hardware sectors (251000 MB)
>sd 4:0:0:0: [sde] Write Protect is off
>sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sde] 490234752 512-byte hardware sectors (251000 MB)
>sd 4:0:0:0: [sde] Write Protect is off
>sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: sde1
>sd 4:0:0:0: [sde] Attached SCSI disk
>scsi 5:0:0:0: Direct-Access     ATA      Maxtor 7Y250M0   YAR5 PQ: 0 ANSI: 5
>sd 5:0:0:0: [sdf] 490234752 512-byte hardware sectors (251000 MB)
>sd 5:0:0:0: [sdf] Write Protect is off
>sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sdf] 490234752 512-byte hardware sectors (251000 MB)
>sd 5:0:0:0: [sdf] Write Protect is off
>sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdf: sdf1
>sd 5:0:0:0: [sdf] Attached SCSI disk
>pata_via 0000:00:0f.1: version 0.3.2
>PCI: Found IRQ 11 for device 0000:00:0f.1
>PCI: Sharing IRQ 11 with 0000:00:05.0
>PCI: Sharing IRQ 11 with 0000:00:10.1
>PCI: Sharing IRQ 11 with 0000:00:10.0
>PCI: VIA VLink IRQ fixup for 0000:00:0f.1, from 255 to 11
>scsi6 : pata_via
>scsi7 : pata_via
>ata7: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
>ata8: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
>ata8.01: ATAPI: AOPEN   DVD1648/AAP, 1.06, max UDMA/33
>ata8.01: configured for UDMA/33
>scsi 7:0:1:0: CD-ROM            AOPEN    DVD1648/AAP      1.06 PQ: 0 ANSI: 5
>md: md0 stopped.
>md: bind<sdb1>
>md: bind<sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  8 users, 11 roles, 2356 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 212215 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1197065304.044:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 4:0:0:0: Attached scsi generic sg4 type 0
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>scsi 7:0:1:0: Attached scsi generic sg6 type 5
>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 7:0:1:0: Attached scsi CD-ROM sr0
>tg3.c:v3.81.1 (October 18, 2007)
>PCI: Found IRQ 5 for device 0000:00:0b.0
>PCI: Sharing IRQ 5 with 0000:00:08.0
>PCI: Sharing IRQ 5 with 0000:00:08.2
>PCI: Sharing IRQ 5 with 0000:00:08.4
>PCI: Sharing IRQ 5 with 0000:00:10.4
>PCI: Sharing IRQ 5 with 0000:00:11.5
>eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:09:2e:b9:3b
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>input: PC Speaker as /class/input/input3
>PCI: Found IRQ 5 for device 0000:00:0e.0
>PCI: Sharing IRQ 5 with 0000:00:0a.0
>PCI: Sharing IRQ 5 with 0000:00:0a.2
>PCI: Sharing IRQ 5 with 0000:00:0a.4
>PCI: Sharing IRQ 5 with 0000:00:0f.0
>PCI: Sharing IRQ 5 with 0000:00:10.3
>PCI: Sharing IRQ 5 with 0000:00:10.2
>Linux video capture interface: v2.00
>firewire_ohci: Added fw-ohci device 0000:00:0e.0, OHCI version 1.0
>spurious 8259A interrupt: IRQ7.
>cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
>CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected]
>TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
>saa7146: register extension 'budget_av'.
>cx2388x v4l2 driver version 0.0.6 loaded
>tveeprom 1-0050: Hauppauge model 90002, rev C176, serial# 161147
>tveeprom 1-0050: MAC address is 00-0D-FE-02-75-7B
>tveeprom 1-0050: tuner model is Thompson DTT7592 (idx 76, type 4)
>tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
>tveeprom 1-0050: audio processor is None (idx 0)
>tveeprom 1-0050: decoder processor is CX882 (idx 25)
>tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
>cx88[0]: hauppauge eeprom: model=90002
>input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input4
>cx88[0]/2: cx2388x 8802 Driver Manager
>PCI: Found IRQ 5 for device 0000:00:08.2
>PCI: Sharing IRQ 5 with 0000:00:08.0
>PCI: Sharing IRQ 5 with 0000:00:08.4
>PCI: Sharing IRQ 5 with 0000:00:0b.0
>PCI: Sharing IRQ 5 with 0000:00:10.4
>PCI: Sharing IRQ 5 with 0000:00:11.5
>cx88[0]/2: found at 0000:00:08.2, rev: 5, irq: 5, latency: 32, mmio: 0xdd000000
>PCI: setting IRQ 10 as level-triggered
>PCI: Found IRQ 10 for device 0000:00:07.0
>saa7146: found saa7146 @ mem f8900a00 (revision 1, irq 10) (0x153b,0x1156).
>saa7146 (0): dma buffer size 192512
>DVB: registering new adapter (Terratec Cinergy 1200 DVB-C)
>adapter failed MAC signature check
>encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
>KNC1-0: MAC addr = 00:0a:ac:01:b7:00
>TDA10021: i2c-addr = 0x0c, id = 0x7c
>DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
>budget-av: ci interface initialised.
>PCI: Found IRQ 5 for device 0000:00:08.0
>PCI: Sharing IRQ 5 with 0000:00:08.2
>PCI: Sharing IRQ 5 with 0000:00:08.4
>PCI: Sharing IRQ 5 with 0000:00:0b.0
>PCI: Sharing IRQ 5 with 0000:00:10.4
>PCI: Sharing IRQ 5 with 0000:00:11.5
>cx88[0]/0: found at 0000:00:08.0, rev: 5, irq: 5, latency: 32, mmio: 0xdc000000
>cx88[0]/0: registered device video0 [v4l2]
>cx88[0]/0: registered device vbi0
>PCI: Found IRQ 5 for device 0000:00:0a.0
>PCI: Sharing IRQ 5 with 0000:00:0a.2
>PCI: Sharing IRQ 5 with 0000:00:0a.4
>PCI: Sharing IRQ 5 with 0000:00:0e.0
>PCI: Sharing IRQ 5 with 0000:00:0f.0
>PCI: Sharing IRQ 5 with 0000:00:10.3
>PCI: Sharing IRQ 5 with 0000:00:10.2
>CORE cx88[1]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected]
>TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
>tveeprom 3-0050: Hauppauge model 90002, rev C176, serial# 43042
>tveeprom 3-0050: MAC address is 00-0D-FE-00-A8-22
>tveeprom 3-0050: tuner model is Thompson DTT7592 (idx 76, type 4)
>tveeprom 3-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
>tveeprom 3-0050: audio processor is None (idx 0)
>tveeprom 3-0050: decoder processor is CX882 (idx 25)
>tveeprom 3-0050: has no radio, has IR receiver, has no IR transmitter
>cx88[1]: hauppauge eeprom: model=90002
>input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input5
>cx88[1]/0: found at 0000:00:0a.0, rev: 5, irq: 5, latency: 32, mmio: 0xd9000000
>cx88[1]/0: registered device video1 [v4l2]
>cx88[1]/0: registered device vbi1
>cx88[1]/2: cx2388x 8802 Driver Manager
>PCI: Found IRQ 5 for device 0000:00:0a.2
>PCI: Sharing IRQ 5 with 0000:00:0a.0
>PCI: Sharing IRQ 5 with 0000:00:0a.4
>PCI: Sharing IRQ 5 with 0000:00:0e.0
>PCI: Sharing IRQ 5 with 0000:00:0f.0
>PCI: Sharing IRQ 5 with 0000:00:10.3
>PCI: Sharing IRQ 5 with 0000:00:10.2
>cx88[1]/2: found at 0000:00:0a.2, rev: 5, irq: 5, latency: 32, mmio: 0xda000000
>PCI: Found IRQ 5 for device 0000:00:11.5
>PCI: Sharing IRQ 5 with 0000:00:08.0
>PCI: Sharing IRQ 5 with 0000:00:08.2
>PCI: Sharing IRQ 5 with 0000:00:08.4
>PCI: Sharing IRQ 5 with 0000:00:0b.0
>PCI: Sharing IRQ 5 with 0000:00:10.4
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>cx2388x dvb driver version 0.0.6 loaded
>cx8802_register_driver() ->registering driver type=dvb access=shared
>CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
>cx88[0]/2: cx2388x based dvb card
>DVB: registering new adapter (cx88[0])
>DVB: registering frontend 1 (Conexant CX22702 DVB-T)...
>CORE cx88[1]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
>cx88[1]/2: cx2388x based dvb card
>DVB: registering new adapter (cx88[1])
>DVB: registering frontend 2 (Conexant CX22702 DVB-T)...
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>md: md1 stopped.
>md: bind<sdb3>
>md: bind<sdc1>
>md: bind<sdd1>
>md: bind<sde1>
>md: bind<sdf1>
>md: bind<sda3>
>raid5: device sda3 operational as raid disk 0
>raid5: device sdf1 operational as raid disk 5
>raid5: device sde1 operational as raid disk 4
>raid5: device sdd1 operational as raid disk 3
>raid5: device sdc1 operational as raid disk 2
>raid5: device sdb3 operational as raid disk 1
>raid5: allocated 6293kB for md1
>raid5: raid level 5 set md1 active with 6 out of 6 devices, algorithm 2
>RAID5 conf printout:
> --- rd:6 wd:6
> disk 0, o:1, dev:sda3
> disk 1, o:1, dev:sdb3
> disk 2, o:1, dev:sdc1
> disk 3, o:1, dev:sdd1
> disk 4, o:1, dev:sde1
> disk 5, o:1, dev:sdf1
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on md0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md1, type ext3), uses xattr
>Adding 1004052k swap on /dev/sdb2.  Priority:-1 extents:1 across:1004052k
>Adding 1004052k swap on /dev/sda2.  Priority:-2 extents:1 across:1004052k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1197061726.446:3): audit_pid=1577 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 375821: 254601 | 254611 | 256931 | 256941 | 281581 | 281591 | 281601 | 281611