Attachment 284501 Details for Bug 420361 – dmesg output

dmesg output

dmesg.txt (text/plain), 16.00 KB, created by Ray Van Dolson on 2007-12-11 19:23:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ray Van Dolson

Created: 2007-12-11 19:23:05 UTC

Size: 16.00 KB

patch

obsolete

>00 MHz), vid 0xe
><6>powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>Freeing unused kernel memory: 192k freed
><4>Write protecting the kernel read-only data: 468k
><5>FS-Cache: Loaded
><4>FS-Cache: netfs 'nfs' registered for caching
><6>loop: loaded (max 8 devices)
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>input: PC Speaker as /class/input/input0
><6>squashfs: version 3.2-alpha (2006/12/12) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>IPv6 over IPv4 tunneling driver
><6>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-724.
><5>iscsi: registered transport (tcp)
><4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
><6>GSI 16 sharing vector 0xD9 and IRQ 16
><6>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 23 (level, high) -> IRQ 217
><7>PCI: Setting latency timer of device 0000:00:02.1 to 64
><6>ehci_hcd 0000:00:02.1: EHCI Host Controller
><6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:02.1: debug port 1
><7>PCI: cache line size of 64 is not supported by device 0000:00:02.1
><6>ehci_hcd 0000:00:02.1: irq 217, io mem 0xa0001000
><6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 10 ports detected
><7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
><4>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
><6>GSI 17 sharing vector 0xE1 and IRQ 17
><6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 225
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><6>ohci_hcd 0000:00:02.0: OHCI Host Controller
><6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:02.0: irq 225, io mem 0xa0000000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 10 ports detected
><6>usb 1-7: new high speed USB device using ehci_hcd and address 3
><6>usb 1-7: configuration #1 chosen from 1 choice
><6>hub 1-7:1.0: USB hub found
><6>hub 1-7:1.0: 2 ports detected
><6>usb 2-4: new full speed USB device using ohci_hcd and address 2
><6>usb 2-4: configuration #1 chosen from 1 choice
><6>hub 2-4:1.0: USB hub found
><6>hub 2-4:1.0: 4 ports detected
><6>usb 2-4.2: new low speed USB device using ohci_hcd and address 3
><6>usb 2-4.2: configuration #1 chosen from 1 choice
><6>input: PS/2+USB Mouse as /class/input/input1
><6>input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-4.2
><6>usb 2-4.4: new full speed USB device using ohci_hcd and address 4
><6>usb 2-4.4: configuration #1 chosen from 1 choice
><6>input: Sun USB Keyboard as /class/input/input2
><6>input: USB HID v1.10 Keyboard [Sun USB Keyboard] on usb-0000:00:02.0-4.4
><6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
><4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
><6>GSI 18 sharing vector 0xE9 and IRQ 18
><6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 21 (level, high) -> IRQ 233
><7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
><6>forcedeth: using HIGHDMA
><6>eth0: forcedeth.c: subsystem: 0108e:534a bound to 0000:00:0a.0
><4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 47
><6>GSI 19 sharing vector 0x32 and IRQ 19
><6>ACPI: PCI Interrupt 0000:80:0a.0[A] -> Link [LMAC] -> GSI 47 (level, high) -> IRQ 50
><7>PCI: Setting latency timer of device 0000:80:0a.0 to 64
><6>forcedeth: using HIGHDMA
><6>eth1: forcedeth.c: subsystem: 0108e:534a bound to 0000:80:0a.0
><7>libata version 2.21 loaded.
><7>sata_nv 0000:00:07.0: version 3.4
><4>PCI: Enabling device 0000:00:07.0 (0005 -> 0007)
><4>ACPI: PCI Interrupt Link [LSI1] disabled and referenced, BIOS bug
><4>ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20
><6>GSI 20 sharing vector 0x3A and IRQ 20
><6>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSI1] -> GSI 20 (level, high) -> IRQ 58
><5>sata_nv 0000:00:07.0: Using ADMA mode
><7>PCI: Setting latency timer of device 0000:00:07.0 to 64
><6>scsi0 : sata_nv
><6>scsi1 : sata_nv
><6>ata1: SATA max UDMA/133 cmd 0xffffc2000002e480 ctl 0xffffc2000002e4a0 bmdma 0x0000000000011c10 irq 58
><6>ata2: SATA max UDMA/133 cmd 0xffffc2000002e580 ctl 0xffffc2000002e5a0 bmdma 0x0000000000011c18 irq 58
><6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata1.00: ATA-6: ST3120026AS, 8.05, max UDMA/133
><6>ata1.00: 234375000 sectors, multi 16: LBA48 
><6>ata1.00: configured for UDMA/133
><6>ata2: SATA link down (SStatus 0 SControl 300)
><5>  Vendor: ATA       Model: ST3120026AS       Rev: 8.05
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><6>ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
><5>SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><6> sda: sda1 sda2
><5>sd 0:0:0:0: Attached scsi disk sda
><4>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 217
><5>sata_nv 0000:00:08.0: Using ADMA mode
><7>PCI: Setting latency timer of device 0000:00:08.0 to 64
><6>scsi2 : sata_nv
><6>scsi3 : sata_nv
><6>ata3: SATA max UDMA/133 cmd 0xffffc20000030480 ctl 0xffffc200000304a0 bmdma 0x0000000000011c20 irq 217
><6>ata4: SATA max UDMA/133 cmd 0xffffc20000030580 ctl 0xffffc200000305a0 bmdma 0x0000000000011c28 irq 217
><6>ata3: SATA link down (SStatus 0 SControl 300)
><6>ata4: SATA link down (SStatus 0 SControl 300)
><4>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 46
><6>GSI 21 sharing vector 0x42 and IRQ 21
><6>ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LTID] -> GSI 46 (level, high) -> IRQ 66
><5>sata_nv 0000:80:07.0: Using ADMA mode
><7>PCI: Setting latency timer of device 0000:80:07.0 to 64
><6>scsi4 : sata_nv
><6>scsi5 : sata_nv
><6>ata5: SATA max UDMA/133 cmd 0xffffc20000032480 ctl 0xffffc200000324a0 bmdma 0x0000000000013000 irq 66
><6>ata6: SATA max UDMA/133 cmd 0xffffc20000032580 ctl 0xffffc200000325a0 bmdma 0x0000000000013008 irq 66
><6>ata5: SATA link down (SStatus 0 SControl 300)
><6>ata6: SATA link down (SStatus 0 SControl 300)
><4>ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 45
><6>GSI 22 sharing vector 0x4A and IRQ 22
><6>ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LSI1] -> GSI 45 (level, high) -> IRQ 74
><5>sata_nv 0000:80:08.0: Using ADMA mode
><7>PCI: Setting latency timer of device 0000:80:08.0 to 64
><6>scsi6 : sata_nv
><6>scsi7 : sata_nv
><6>ata7: SATA max UDMA/133 cmd 0xffffc20000034480 ctl 0xffffc200000344a0 bmdma 0x0000000000013010 irq 74
><6>ata8: SATA max UDMA/133 cmd 0xffffc20000034580 ctl 0xffffc200000345a0 bmdma 0x0000000000013018 irq 74
><6>ata7: SATA link down (SStatus 0 SControl 300)
><6>ata8: SATA link down (SStatus 0 SControl 300)
><7>eth0: no IPv6 routers present
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>security:  3 users, 6 roles, 1658 types, 210 bools, 1 sens, 1024 cats
><7>security:  61 classes, 57675 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev hda, type iso9660), uses genfs_contexts
><7>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1197370423.003:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: generic_sse
><4>   generic_sse:  7588.000 MB/sec
><4>raid5: using function: generic_sse (7588.000 MB/sec)
><4>raid6: int64x1   1894 MB/s
><4>raid6: int64x2   2679 MB/s
><4>raid6: int64x4   2148 MB/s
><4>raid6: int64x8   2199 MB/s
><4>raid6: sse2x1    2804 MB/s
><4>raid6: sse2x2    3847 MB/s
><4>raid6: sse2x4    4265 MB/s
><4>raid6: using algorithm sse2x4 (4265 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Oct 10 2007 16:35:30) installed
><6>Lock_Nolock (built Oct 10 2007 16:35:45) installed
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><7>eth0: no IPv6 routers present
><7>SELinux: initialized (dev 0:15, type nfs), uses genfs_contexts
><6>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>sd 0:0:0:0: SCSI error: return code = 0x08000002
><6>sda: Current [descriptor]: sense key: Medium Error
><6>    Add. Sense: Unrecovered read error - auto reallocate failed
><4>
><6>Descriptor sense data with sense descriptors (in hex):
><6>        72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
><6>        00 6f 31 4e 
><4>end_request: I/O error, dev sda, sector 7287118
><6>ata1: EH complete
><5>SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>ata1: EH complete
><4>ata1: timeout waiting for ADMA IDLE, stat=0x440
><3>ata1.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
><3>ata1.00: (CPB resp_flags 0x11: CMD error)
><3>ata1.00: cmd c8/00:08:4d:31:6f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 51/40:00:4e:31:6f/00:00:00:00:00/e0 Emask 0x9 (media error)
><6>ata1.00: configured for UDMA/133
><6>sd 0:0:0:0: SCSI error: return code = 0x08000002
><6>sda: Current [descriptor]: sense key: Medium Error
><6>    Add. Sense: Unrecovered read error - auto reallocate failed
><4>
><6>Descriptor sense data with sense descriptors (in hex):
><6>        72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
><6>        00 6f 31 4e 
><4>end_request: I/O error, dev sda, sector 7287118
><6>ata1: EH complete
><5>SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back

Actions: View

Attachments on bug 420361: 284501 | 284511 | 284521