Attachment 285141 Details for Bug 352241 – dmesg, ASUS A8V-XE

dmesg, ASUS A8V-XE

dmesg.txt (text/plain), 44.90 KB, created by Lamar Owen on 2007-12-12 06:08:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lamar Owen

Created: 2007-12-12 06:08:27 UTC

Size: 44.90 KB

patch

obsolete

>Linux version 2.6.23.8-34.fc7 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Thu Nov 22 23:05:33 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
> BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
> BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
> BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0001000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>2174MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5850
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 786144) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   786144
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   786144
>On node 0 totalpages: 786144
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 4349 pages used for memmap
>  HighMem zone: 552419 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F7790, 0024 (r2 K8T890)
>ACPI: XSDT BFEE30C0, 003C (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP BFEEA100, 00F4 (r3 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT BFEE3240, 6E57 (r1 K8T890 AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS BFEE0000, 0040
>ACPI: MCFG BFEEA300, 003C (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC BFEEA240, 0074 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at c0000000 (gap: bff00000:20100000)
>swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 780003
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 pci=nomsi
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>mapped IOAPIC to ffff9000 (fecc0000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a5000 soft=c0785000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2200.176 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3109868k/3144576k available (2175k kernel code, 33528k reserved, 1113k data, 280k init, 2227072k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073c000 - 0xc0782000   ( 280 kB)
>      .data : 0xc061fe65 - 0xc0736544   (1113 kB)
>      .text : 0xc0400000 - 0xc061fe65   (2175 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4403.70 BogoMIPS (lpj=2201853)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a6000 soft=c0786000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4399.58 BogoMIPS (lpj=2199794)
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>Total of 2 processors activated (8803.29 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 18:47:13  Date: 12/11/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfbcc0, last bus=11
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:13.1
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE5C._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE6C._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.1
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.2
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.3
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x400-0x47f has been reserved
>pnp: 00:01: ioport range 0x500-0x50f has been reserved
>pnp: 00:02: iomem range 0x10000000-0x10000fff could not be reserved
>pnp: 00:0e: iomem range 0xe0000000-0xf0000fff could not be reserved
>pnp: 00:0f: iomem range 0xd9800-0xdbfff has been reserved
>pnp: 00:0f: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0f: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: e000-efff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:09:00.0
>  IO window: d000-dfff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:00.1
>  IO window: d000-dfff
>  MEM window: fdb00000-fdcfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:13.0
>  IO window: d000-dfff
>  MEM window: fdb00000-fddfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:13.1
>  IO window: c000-cfff
>  MEM window: fda00000-fdafffff
>  PREFETCH window: f8000000-fbffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:03.1 to 64
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:03.3 to 64
>PCI: Setting latency timer of device 0000:00:13.0 to 64
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>ACPI: PCI Interrupt 0000:07:00.1[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:07:00.1 to 64
>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>PCI: Setting latency timer of device 0000:00:13.1 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3601k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1197398833.931:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 31E176BC2F9DAC60
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:02:00.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie02]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie02]
>PCI: Setting latency timer of device 0000:00:03.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.1:pcie00]
>Allocate Port Service[0000:00:03.1:pcie02]
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.2:pcie00]
>Allocate Port Service[0000:00:03.2:pcie02]
>PCI: Setting latency timer of device 0000:00:03.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.3:pcie00]
>Allocate Port Service[0000:00:03.3:pcie02]
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:07:00.0:pcie00]
>PCI: Setting latency timer of device 0000:07:00.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:07:00.1:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 128M @ 0xd8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.00.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>Using IPI No-Shortcut mode
>  Magic number: 3:10:797
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f900
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 24
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 24, io base 0x0000f700
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 25
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 25, io base 0x0000f600
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: debug port 1
>ehci_hcd 0000:00:10.4: irq 22, io mem 0xfdffe000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 16 (level, low) -> IRQ 23
>usb 5-8: new high speed USB device using ehci_hcd and address 2
>usb 5-8: configuration #1 chosen from 1 choice
>scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
>        <Adaptec 29320LPE PCIe Ultra320 SCSI adapter>
>        aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
>scsi 0:0:0:0: Direct-Access     SEAGATE  ST3146807LW      DS09 PQ: 0 ANSI: 3
> target0:0:0: asynchronous
>scsi0:A:0:0: Tagged Queuing enabled.  Depth 4
> target0:0:0: Beginning Domain Validation
> target0:0:0: wide asynchronous
> target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
>libata version 2.21 loaded.
> target0:0:0: Ending Domain Validation
>scsi 0:0:1:0: Direct-Access     SEAGATE  ST3146807LW      DS09 PQ: 0 ANSI: 3
> target0:0:1: asynchronous
>scsi0:A:1:0: Tagged Queuing enabled.  Depth 4
> target0:0:1: Beginning Domain Validation
> target0:0:1: wide asynchronous
> target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
> target0:0:1: Ending Domain Validation
>scsi 0:0:3:0: Direct-Access     SEAGATE  ST3146807LW      DS09 PQ: 0 ANSI: 3
> target0:0:3: asynchronous
>scsi0:A:3:0: Tagged Queuing enabled.  Depth 4
> target0:0:3: Beginning Domain Validation
> target0:0:3: wide asynchronous
> target0:0:3: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
> target0:0:3: Ending Domain Validation
>sd 0:0:0:0: [sda] 286749480 512-byte hardware sectors (146816 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 0:0:0:0: [sda] 286749480 512-byte hardware sectors (146816 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:1:0: [sdb] 286749480 512-byte hardware sectors (146816 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: ab 00 10 08
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 0:0:1:0: [sdb] 286749480 512-byte hardware sectors (146816 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: ab 00 10 08
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sdb: sdb1 sdb2 sdb3
>sd 0:0:1:0: [sdb] Attached SCSI disk
>sd 0:0:3:0: [sdc] 286749480 512-byte hardware sectors (146816 MB)
>sd 0:0:3:0: [sdc] Write Protect is off
>sd 0:0:3:0: [sdc] Mode Sense: ab 00 10 08
>sd 0:0:3:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 0:0:3:0: [sdc] 286749480 512-byte hardware sectors (146816 MB)
>sd 0:0:3:0: [sdc] Write Protect is off
>sd 0:0:3:0: [sdc] Mode Sense: ab 00 10 08
>sd 0:0:3:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sdc: sdc1 sdc2 sdc3
>sd 0:0:3:0: [sdc] Attached SCSI disk
>Initializing USB Mass Storage driver...
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 1:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>scsi 1:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>scsi 1:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>scsi 1:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 1:0:0:0: [sdd] Attached SCSI removable disk
>sd 1:0:0:1: [sde] Attached SCSI removable disk
>sd 1:0:0:2: [sdf] Attached SCSI removable disk
>sd 1:0:0:3: [sdg] Attached SCSI removable disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1197398865.330:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1862 types, 87 bools, 1 sens, 1024 cats
>security:  61 classes, 71149 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1197398865.557:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 0:0:3:0: Attached scsi generic sg2 type 0
>sd 1:0:0:0: Attached scsi generic sg3 type 0
>sd 1:0:0:1: Attached scsi generic sg4 type 0
>sd 1:0:0:2: Attached scsi generic sg5 type 0
>sd 1:0:0:3: Attached scsi generic sg6 type 0
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>pata_via 0000:00:0f.1: version 0.3.2
>scsi2 : pata_via
>scsi3 : pata_via
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fa00 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fa08 irq 15
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>input: PC Speaker as /class/input/input5
>ata1.00: ATA-7: ST3300831A, 3.03, max UDMA/100
>ata1.00: 586072368 sectors, multi 16: LBA48 
>ata1.00: limited to UDMA/33 due to 40-wire cable
>ata1.00: configured for UDMA/33
>gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 372kHz
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>Linux video capture interface: v2.00
>ata2.00: ATAPI: LITE-ON DVDRW SOHW-1613S, AS04, max UDMA/66
>ata2.00: limited to UDMA/33 due to 40-wire cable
>ivtv:  Start initialization, version 1.0.0
>ata2.00: configured for UDMA/33
>scsi 2:0:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdh] 586072368 512-byte hardware sectors (300069 MB)
>sd 2:0:0:0: [sdh] Write Protect is off
>sd 2:0:0:0: [sdh] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdh] 586072368 512-byte hardware sectors (300069 MB)
>sd 2:0:0:0: [sdh] Write Protect is off
>sd 2:0:0:0: [sdh] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdh: sdh1 sdh2
>sd 2:0:0:0: [sdh] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg7 type 0
>scsi 3:0:0:0: CD-ROM            LITE-ON  DVDRW SOHW-1613S AS04 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Attached scsi generic sg8 type 5
>ahci 0000:00:0f.0: version 2.3
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 24
>ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
>ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
>ahci 0000:00:0f.0: flags: 64bit pm led clo pmp pio slum part 
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>scsi7 : ahci
>ata3: SATA max UDMA/133 cmd 0xf88aa100 ctl 0x00000000 bmdma 0x00000000 irq 24
>ata4: SATA max UDMA/133 cmd 0xf88aa180 ctl 0x00000000 bmdma 0x00000000 irq 24
>ata5: SATA max UDMA/133 cmd 0xf88aa200 ctl 0x00000000 bmdma 0x00000000 irq 24
>ata6: SATA max UDMA/133 cmd 0xf88aa280 ctl 0x00000000 bmdma 0x00000000 irq 24
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ivtv0: Initializing card #0
>ivtv0: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt 0000:0b:0c.0[A] -> GSI 17 (level, low) -> IRQ 26
>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
>ivtv0: Encoder revision: 0x02060039
>tveeprom 0-0050: Hauppauge model 26552, rev C268, serial# 7724077
>tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
>tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 0-0050: audio processor is CX25843 (idx 37)
>tveeprom 0-0050: decoder processor is CX25843 (idx 30)
>tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter
>ivtv0: Autodetected Hauppauge WinTV PVR-150
>tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
>tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
>tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
>wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
>tuner 0-0061: type set to 47 (LG NTSC (TAPE series))
>ivtv0: Registered device video0 for encoder MPEG (4 MB)
>ivtv0: Registered device video32 for encoder YUV (2 MB)
>ivtv0: Registered device vbi0 for encoder VBI (1 MB)
>ivtv0: Registered device video24 for encoder PCM audio (1 MB)
>ivtv0: Registered device radio0 for encoder radio
>ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
>ivtv:  End initialization
>sata_sil 0000:0b:0b.0: version 2.3
>ACPI: PCI Interrupt 0000:0b:0b.0[A] -> GSI 16 (level, low) -> IRQ 23
>scsi8 : sata_sil
>scsi9 : sata_sil
>ata7: SATA max UDMA/100 cmd 0xf89f6080 ctl 0xf89f608a bmdma 0xf89f6000 irq 23
>ata8: SATA max UDMA/100 cmd 0xf89f60c0 ctl 0xf89f60ca bmdma 0xf89f6008 irq 23
>ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata7.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
>ata7.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata7.00: configured for UDMA/100
>ata8: SATA link down (SStatus 0 SControl 310)
>scsi 8:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
>sd 8:0:0:0: [sdi] 488397168 512-byte hardware sectors (250059 MB)
>sd 8:0:0:0: [sdi] Write Protect is off
>sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00
>sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:0:0: [sdi] 488397168 512-byte hardware sectors (250059 MB)
>sd 8:0:0:0: [sdi] Write Protect is off
>sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00
>sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdi: sdi1
>sd 8:0:0:0: [sdi] Attached SCSI disk
>sd 8:0:0:0: Attached scsi generic sg9 type 0
>ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 17 (level, low) -> IRQ 26
>PCI: Setting latency timer of device 0000:07:01.0 to 64
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 25
>eth0: VIA Rhine II at 0xfdffd000, 00:1a:92:6f:5a:ac, IRQ 25.
>eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdi1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdi1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>audit(1197416889.039:4): audit_pid=2520 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 27
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>hda-intel: Invalid position buffer, using LPIB read method instead.
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2: EH complete
>ata2.00: limiting speed to UDMA/25:PIO4
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>sr 3:0:0:0: ioctl_internal_command return code = 8000002
>   : Sense Key : Aborted Command [current] [descriptor]
>   : Add. Sense: No additional sense information
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/25
>ata2: EH complete
>ata2.00: limiting speed to PIO4
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO4
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO4
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO4
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO4
>ata2: EH complete
>sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ata2.00: limiting speed to PIO3
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO3
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO3
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO3
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO3
>ata2: EH complete
>ata2.00: limiting speed to PIO0
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>sr 3:0:0:0: ioctl_internal_command return code = 8000002
>   : Sense Key : Aborted Command [current] [descriptor]
>   : Add. Sense: No additional sense information
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>sr 3:0:0:0: ioctl_internal_command return code = 8000002
>   : Sense Key : Aborted Command [current] [descriptor]
>   : Add. Sense: No additional sense information
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete
>sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for PIO0
>ata2: EH complete

Actions: View

Attachments on bug 352241: 285121 | 285131 | 285141