Attachment 289802 Details for Bug 403651 – dmesg output of booting with cpufreq.debug=7 option

dmesg output of booting with cpufreq.debug=7 option

cpufreq.debug=7.txt (text/plain), 23.98 KB, created by Jaakko R on 2007-12-17 19:57:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jaakko R

Created: 2007-12-17 19:57:32 UTC

Size: 23.98 KB

patch

obsolete

>Linux version 2.6.23.8-63.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Nov 21 18:51:08 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffda000 (usable)
> BIOS-e820: 000000003ffda000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262106) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262106
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262106
>On node 0 totalpages: 262106
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32475 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FC9B0, 0014 (r0 DELL  )
>ACPI: RSDT 3FFDA7D3, 0040 (r1 DELL    CPi R   27D50913 ASL        61)
>ACPI: FACP 3FFDB400, 0074 (r1 DELL    CPi R   27D50913 ASL        61)
>ACPI: DSDT 3FFDC000, 2A1A (r1 INT430 SYSFexxx     1001 MSFT  100000E)
>ACPI: FACS 3FFEA800, 0040
>ACPI: APIC 3FFDBC00, 0068 (r1 DELL    CPi R   27D50913 ASL        47)
>ACPI: MCFG 3FFDBBC0, 003E (r16 DELL    CPi R   27D50913 ASL        61)
>ACPI: BOOT 3FFDB7C0, 0028 (r1 DELL    CPi R   27D50913 ASL        61)
>ACPI: SSDT 3FFDABE6, 023E (r1  PmRef  Cpu0Ist     3000 INTL 20030522)
>ACPI: SSDT 3FFDAA0E, 01D8 (r1  PmRef  Cpu0Cst     3001 INTL 20030522)
>ACPI: SSDT 3FFDA813, 01FB (r1  PmRef    CpuPm     3000 INTL 20030522)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 260059
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet cpufreq.debug=7
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 798.020 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1030584k/1048424k available (2184k kernel code, 17076k reserved, 1116k data, 280k init, 130920k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622245 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622245   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1597.41 BogoMIPS (lpj=798707)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f3ff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
>Total of 1 processors activated (1597.41 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 16:09:58  Date: 12/14/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
>pnp: 00:02: ioport range 0x1008-0x100f has been reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
>pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
>pnp: 00:03: ioport range 0x1060-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
>pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
>pnp: 00:08: ioport range 0x900-0x90f has been reserved
>pnp: 00:08: ioport range 0x910-0x91f has been reserved
>pnp: 00:08: ioport range 0x920-0x92f has been reserved
>pnp: 00:08: ioport range 0x930-0x93f has been reserved
>pnp: 00:08: ioport range 0x940-0x97f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dd000000-dfefffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bus 4, cardbus bridge: 0000:03:01.0
>  IO window: 00001400-000014ff
>  IO window: 00001800-000018ff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: 54000000-57ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: dcf00000-dcffffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3602k freed
>Simple Boot Flag at 0x79 set to 0x1
>speedstep-lib: x86: 6, model: d
>speedstep-ich: Intel(R) SpeedStep(TM) capable processor not found
>speedstep-lib: x86: 6, model: d
>speedstep-smi: No supported Intel CPU detected.
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1197648598.990:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key AD2F53515391081
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THM] (48 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:03:01.0 [1028:0189]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 17
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
>pcmcia: parent PCI bridge Memory window: 0xdcf00000 - 0xdcffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:402:186
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
>ata1.00: ATA-6: HTS726060M9AT00, MH4OA6EA, max UDMA/100
>ata1.00: 117210240 sectors, multi 8: LBA48 
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: SONY DVD+/-RW DW-D56A, PDS7, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      HTS726060M9AT00  MH4O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            SONY     DVD+-RW DW-D56A  PDS7 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1197648607.865:2): selinux=0 auid=4294967295
>Clocksource tsc unstable (delta = -291639847 ns)
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>input: PC Speaker as /class/input/input4
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 18
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SBTN]
>nvidia: module license 'NVIDIA' taints kernel.
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
>ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 18
>mmc0: SDHCI at 0xdcffc700 irq 18 DMA
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 18
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
>net eth1: device_rename: sysfs_create_symlink failed (-17)
>udev: renamed network interface eth0 to eth1
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
>ssb: SPROM revision 1 detected.
>ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:11:43:6f:7e:99
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>intel8x0_measure_ac97_clock: measured 50397 usecs
>intel8x0: clocking to 48000
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>acpi-cpufreq: acpi_cpufreq_init
>acpi-cpufreq: acpi_cpufreq_early_init
>cpufreq-core: trying to register driver acpi-cpufreq
>cpufreq-core: adding CPU 0
>acpi-cpufreq: acpi_cpufreq_cpu_init
>acpi-cpufreq: HARDWARE addr space
>freq-table: table entry 0: 1733000 kHz, 0 index
>freq-table: table entry 1: 1333000 kHz, 1 index
>freq-table: table entry 2: 1067000 kHz, 2 index
>freq-table: table entry 3: 800000 kHz, 3 index
>acpi-cpufreq: get_cur_freq_on_cpu (0)
>acpi-cpufreq: get_cur_val = 100664850
>acpi-cpufreq: cur freq = 800000
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>acpi-cpufreq:      *P0: 1733 MHz, 27000 mW, 10 uS
>acpi-cpufreq:       P1: 1333 MHz, 21000 mW, 10 uS
>acpi-cpufreq:       P2: 1067 MHz, 17000 mW, 10 uS
>acpi-cpufreq:       P3: 800 MHz, 13000 mW, 10 uS
>freq-table: setting show_table for cpu 0 to f7a79e00
>cpufreq-core: setting new policy for CPU 0: 800000 - 1733000 kHz
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 1733000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 1733000 kHz) for cpu 0
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 800000 - 800000 kHz
>cpufreq-core: governor switch
>cpufreq-core: __cpufreq_governor for CPU 0, event 1
>userspace: managing cpu 0 started (800000 - 800000 kHz, currently 800000 kHz)
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>userspace: limit event for cpu 0: 800000 - 800000 kHz,currently 800000 kHz, last set to 800000 kHz
>cpufreq-core: target for CPU 0: 800000 kHz, relation 0
>acpi-cpufreq: acpi_cpufreq_target 800000 (0)
>freq-table: request for target 800000 kHz (relation: 0) for cpu 0
>freq-table: target is 3 (800000 kHz, 3)
>cpufreq-core: notification 0 of frequency transition to 800000 kHz
>cpufreq-core: Warning: CPU frequency is 1733000, cpufreq assumed 800000 kHz.
>userspace: saving cpu_cur_freq of cpu 0 to be 800000 kHz
>cpufreq-core: notification 1 of frequency transition to 800000 kHz
>userspace: saving cpu_cur_freq of cpu 0 to be 800000 kHz
>cpufreq-core: initialization complete
>cpufreq-core: driver acpi-cpufreq up and running
>cpufreq-core: setting new policy for CPU 0: 800000 - 800000 kHz
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 800000 - 800000 kHz
>cpufreq-core: governor switch
>cpufreq-core: __cpufreq_governor for CPU 0, event 2
>userspace: managing cpu 0 stopped
>cpufreq-core: __cpufreq_governor for CPU 0, event 1
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>cpufreq-core: setting new policy for CPU 0: 800000 - 1730 kHz
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 1730 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 800000 - 800000 kHz
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>audit(1197648644.257:3): audit_pid=1482 old=0 by auid=4294967295
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>cpufreq-core: setting new policy for CPU 0: 800000 - 800000 kHz
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 800000 - 800000 kHz
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>ieee80211_crypt: registered algorithm 'TKIP'
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 403651: 271951 | 271961 | 271971 | 274581 | 289802 | 298400 | 346232 | 346233 | 346234 | 346235 | 346236