Attachment 289841 Details for Bug 426057 – dmesg when nmi_watchdog=1

dmesg when nmi_watchdog=1

dmesg.nmi1 (text/plain), 13.70 KB, created by Qian Cai on 2007-12-18 02:11:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qian Cai

Created: 2007-12-18 02:11:36 UTC

Size: 13.70 KB

patch

obsolete

>Linux version 2.6.18-58.el5 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Tue Nov 27 17:01:20 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
> BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
> BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 65532
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 61436 pages, LIFO batch:15
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5c30
>ACPI: RSDT (v001 ASUS   K7V-RM   0x30303031 MSFT 0x31313031) @ 0x0fffc000
>ACPI: FADT (v001 ASUS   K7V-RM   0x30303031 MSFT 0x31313031) @ 0x0fffc080
>ACPI: BOOT (v001 ASUS   K7V-RM   0x30303031 MSFT 0x31313031) @ 0x0fffc040
>ACPI: DSDT (v001   ASUS K7V-RM   0x00001000 MSFT 0x0100000b) @ 0x00000000
>ACPI: PM-Timer IO Port: 0xe408
>Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
>Detected 700.082 MHz processor.
>Built 1 zonelists.  Total pages: 65532
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200 nmi_watchdog=1
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0120a000)
>Enabling fast FPU save and restore... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0743000 soft=c0723000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 252436k/262128k available (2082k kernel code, 9156k reserved, 868k data, 220k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1401.07 BogoMIPS (lpj=700535)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0183f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0183f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0183f1ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0c00)
>CPU0: AMD Athlon(tm) Processor stepping 01
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 2846k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region e400-e4ff claimed by vt82c586 ACPI
>PCI quirk: region e800-e80f claimed by vt82c686 SMB
>Boot video device is 0000:00:0c.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:03: ioport range 0xe400-0xe47f could not be reserved
>pnp: 00:03: ioport range 0xe800-0xe80f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
>TCP: Hash tables configured (established 8192 bind 4096)
>TCP reno registered
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1197903289.209:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key A0123C9D91167CDE
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Disabling Via external APIC routing
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 16 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA Apollo Pro 133 chipset
>agpgart: AGP aperture is 4M @ 0xe7800000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:04.1
>VP_IDE: chipset revision 16
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:04.1
>    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: WDC AC418000D, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: TOSHIBA DVD-ROM SD-M1222, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 35239680 sectors (18042 MB) w/1966KiB Cache, CHS=34960/16/63
>hda: cache flushes not supported
> hda: hda1 hda2
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 621 not supported
>Testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>Time: acpi_pm clocksource has been installed.
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 220k freed
>Write protecting the kernel read-only data: 389k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:04.2: UHCI Host Controller
>uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:04.2: irq 10, io base 0x0000d400
>spurious 8259A interrupt: IRQ7.
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:04.3: UHCI Host Controller
>uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:04.3: irq 10, io base 0x0000d000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>input: Avocent Avocent USBIAC as /class/input/input0
>input: USB HID v1.10 Keyboard [Avocent Avocent USBIAC] on usb-0000:00:04.2-2
>input: Avocent Avocent USBIAC as /class/input/input1
>input: USB HID v1.10 Mouse [Avocent Avocent USBIAC] on usb-0000:00:04.2-2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1197903297.823:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1659 types, 210 bools, 1 sens, 1024 cats
>security:  61 classes, 57717 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1197903298.855:3): policy loaded auid=4294967295
>hdc: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>parport_pc: VIA parallel port: io=0x378, irq=7
>input: PC Speaker as /class/input/input2
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:00:09.0: 3Com PCI 3c905B Cyclone 100baseTx at d083c000.
>via686a 0000:00:04.4: base address not set - upgrade BIOS or use force_addr=0xaddr
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 524280k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:524280k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>eth0:  setting full-duplex.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
>hda: drive_cmd: error=0x04 { DriveStatusError }
>ide: failed opcode was: 0xb0

Actions: View

Attachments on bug 426057: 289838 | 289839 | 289840 | 289841 | 289842