Attachment 289953 Details for Bug 426164 – boot log showing the problem

boot log showing the problem

bootlog-2.6.24-0.107.rc5.git3.fc9 (text/plain), 61.99 KB, created by Benny Amorsen on 2007-12-18 22:46:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benny Amorsen

Created: 2007-12-18 22:46:05 UTC

Size: 61.99 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24-0.107.rc5.git3.fc9 (kojibuilder@) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-36)) #1 SMP Fri Dec 14 12:45:18 EST 2007
>BIOS-provided physical RAM map:r a command-line.                                
> BIOS-e820: 0000000000000000 - 000000000009a800 (usable)                        
> BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved) seconds.             
> BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)                      
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)                      
> BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
> BIOS-e820: 000000007ff70000 - 000000007ff7a000 (ACPI data)
> BIOS-e820: 000000007ff7a000 - 000000007ff80000 (ACPI NVS)
> BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6790
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524144
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524144
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F67D0, 0014 (r0 PTLTD )
>ACPI: RSDT 7FF75599, 0038 (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 7FF79E38, 0074 (r1 INTEL  LINDHRST  6040000 PTL         3)
>ACPI: DSDT 7FF755D1, 4867 (r1  Intel LINDHRST  6040000 MSFT  100000D)
>ACPI: FACS 7FF7AFC0, 0040
>ACPI: MCFG 7FF79EAC, 0040 (r1 PTLTD      MCFG    6040000  LTP        0)
>ACPI: SPCR 7FF79EEC, 0050 (r1 PTLTD  $UCRTBL$  6040000 PTL         1)
>ACPI: APIC 7FF79F3C, 009C (r1 PTLTD      APIC    6040000  LTP        0)
>ACPI: BOOT 7FF79FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
>Processor #6 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
>Processor #7 15:4 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfec84000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 32, address 0xfec84000, GSI 24-47
>ACPI: IOAPIC (id[0x04] address[0xfec84400] gsi_base[48])
>IOAPIC[2]: apic_id 4, version 32, address 0xfec84400, GSI 48-71
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Flat.  Using 3 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>swsusp: Registered nosave memory region: 000000000009a000 - 000000000009b000
>swsusp: Registered nosave memory region: 000000000009b000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ca000
>swsusp: Registered nosave memory region: 00000000000ca000 - 00000000000cc000
>swsusp: Registered nosave memory region: 00000000000cc000 - 00000000000dc000
>swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 516978
>Kernel command line: ro root=/dev/md2 console=ttyS3,115200n8
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0823000 soft=c0803000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2800.283 MHz processor.
>Console: colour VGA+ 80x25
>console [ttyS3] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2054348k/2096576k available (2310k kernel code, 40924k reserved, 1187k data, 576k init, 1179072k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0770000 - 0xc0800000   ( 576 kB)
>      .data : 0xc064195f - 0xc076a924   (1187 kB)
>      .text : 0xc0400000 - 0xc064195f   (2310 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 5605.45 BogoMIPS (lpj=2802726)
>Security Framework initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0824000 soft=c0804000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5599.40 BogoMIPS (lpj=2799701)
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
>lockdep: not fixing up alternatives.
>Booting processor 2/6 eip 3000
>CPU 2 irqstacks, hard=c0825000 soft=c0805000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5599.48 BogoMIPS (lpj=2799742)
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU2: Thermal monitoring enabled
>CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
>lockdep: not fixing up alternatives.
>Booting processor 3/7 eip 3000
>CPU 3 irqstacks, hard=c0826000 soft=c0806000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5599.45 BogoMIPS (lpj=2799727)
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU3: Thermal monitoring enabled
>CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
>Total of 4 processors activated (22403.79 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>khelper used greatest stack depth: 2928 bytes left
>khelper used greatest stack depth: 2880 bytes left
>net_namespace: 80 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:26:04  Date: 12/18/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support.
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of IO resources: 24 
>pnpacpi: exceeded the max number of IO resources: 24 
>pnpacpi: exceeded the max number of IO resources: 24 
>pnpacpi: exceeded the max number of IO resources: 24 
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1180-0x11bf has been reserved
>system 00:01: ioport range 0xfe00-0xfe00 has been reserved
>system 00:01: ioport range 0xfe10-0xfe11 has been reserved
>system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: dd100000-dd1fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: dd200000-dd2fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:04:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:04:00.2
>  IO window: 2000-2fff
>  MEM window: dd400000-dd4fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: 2000-2fff
>  MEM window: dd300000-dd4fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: dd500000-deffffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3023k freed
>khelper used greatest stack depth: 2792 bytes left
>Simple Boot Flag at 0x3b set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1198013164.221:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>khelper used greatest stack depth: 2756 bytes left
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: Processor [CPU3] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>erial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
>00:08: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 3:991:449
>Freeing unused kernel memory: 576k freed
>Write protecting the kernel read-only data: 920k
>Red Hat nash version 6.0.9 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001420
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>insmod used greatest stack depth: 1968 bytes left
>Loading ohci-hcd.ko module
>Loading ehci-hcd.ko module
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:1d.7: debug port 1
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xdd001000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>Loading mbcache.ko module
>Loading jbd.ko module
>Loading ext3.ko module
>Loading raid1.ko module
>md: raid1 personality registered for level 1
>Loading xor.ko module
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  4268.000 MB/sec
>xor: using function: pIII_sse (4268.000 MB/sec)
>Loading async_tx.ko module
>async_tx: api initialized (async)
>Loading async_memcpy.ko module
>Loading async_xor.ko module
>Loading raid456.ko module
>raid6: int32x1    699 MB/s
>raid6: int32x2    636 MB/s
>raid6: int32x4    812 MB/s
>raid6: int32x8    750 MB/s
>raid6: mmxx1     1695 MB/s
>raid6: mmxx2     1925 MB/s
>raid6: sse1x1     988 MB/s
>raid6: sse1x2    1875 MB/s
>raid6: sse2x1    2019 MB/s
>raid6: sse2x2    2941 MB/s
>raid6: using algorithm sse2x2 (2941 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ata_generic.ko module
>Loading pata_acpi.ko module
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 19
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>Waiting for driver initialization.
>Loading ata_piix.ko module
>ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 19
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1470 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1478 irq 15
>ata1.00: ATAPI: CD-224E, 9.9A, max MWDMA2
>ata1.00: configured for MWDMA2
>ata2.00: ATA-7: Maxtor 6Y080M0, YAR511W0, max UDMA/100
>ata2.00: 156301488 sectors, multi 16: LBA48 
>ata2.01: ATA-7: Maxtor 6Y080M0, YAR511W0, max UDMA/100
>ata2.01: 156301488 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/100
>ata2.01: configured for UDMA/100
>scsi 0:0:0:0: CD-ROM            TEAC     CD-224E          9.9A PQ: 0 ANSI: 5
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   YAR5 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 1:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:1:0: Direct-Access     ATA      Maxtor 6Y080M0   YAR5 PQ: 0 ANSI: 5
>sd 1:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 1:0:1:0: [sdb] Attached SCSI disk
>insmod used greatest stack depth: 860 bytes left
>Waiting for driver initialization.
>md: md2 stopped.
>md: bind<sda3>
>md: bind<sdb3>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: md1 stopped.has been started with 2 drives.
>
>md: bind<sda2>
>md: bind<sdb2>
>raid1: raid set md1 active with 2 out of 2 mirrors
>mdadm: /dev/md1 has been started with 2 drives.
>Trying to resume from /dev/md1
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>audit(1198013173.488:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux: policy loaded with handle_unknown=deny
>audit(1198013173.949:3): policy loaded auid=4294967295
>INIT: version 2.86 booting
>                Welcome to Fedora 
>                Press 'I' to enter interactive startup.
>Setting clock  (utc): Tue Dec 18 22:26:18 CET 2007 [  OK  ]
>Starting udev: udevd-event[1156]: node_symlink: device node '/dev/rtc' already exists, link to '/dev/rtc0' will not overwrite it
>[  OK  ]
>Loading default keymap (dk): [  OK  ]
>Setting hostname translate.ipvision.dk:  [  OK  ]
>mdadm: /dev/md0 has been started with 2 drives.
>Setting up Logical Volume Management:   No volume groups found
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/md2 
>/dev/md2: clean, 33811/18986880 files, 822921/18986800 blocks
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/md0 
>/dev/md0: clean, 36/26104 files, 21112/104320 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling /etc/fstab swaps:  [  OK  ]
>INIT: Entering runlevel: 3
>Entering non-interactive startup
>Checking for hardware changes [  OK  ]
>Applying ip6tables firewall rules: Warning: never matched protocol: 51. use extension match instead.
>[  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  [  OK  ]
>Bringing up interface eth1:  [  OK  ]
>Bringing up interface eth2:  [  OK  ]
>Bringing up interface eth0.1127:  Added VLAN with VID == 1127 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1132:  Added VLAN with VID == 1132 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1175:  Added VLAN with VID == 1175 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1427:  Added VLAN with VID == 1427 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1433:  Added VLAN with VID == 1433 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1433.2:  Device eth0.1433.2 does not seem to be present, delaying initialization.
>[FAILED]
>Bringing up interface eth0.1442:  Added VLAN with VID == 1442 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1443:  Added VLAN with VID == 1443 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1452:  Added VLAN with VID == 1452 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1454:  Added VLAN with VID == 1454 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1466:  Added VLAN with VID == 1466 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1491:  Added VLAN with VID == 1491 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1507:  Added VLAN with VID == 1507 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1514:  Added VLAN with VID == 1514 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1515:  Added VLAN with VID == 1515 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1536:  Added VLAN with VID == 1536 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1546:  Added VLAN with VID == 1546 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1552:  Added VLAN with VID == 1552 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1557:  Added VLAN with VID == 1557 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1561:  Added VLAN with VID == 1561 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1568:  Added VLAN with VID == 1568 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1569:  Added VLAN with VID == 1569 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1575:  Added VLAN with VID == 1575 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1576:  Added VLAN with VID == 1576 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1578:  Added VLAN with VID == 1578 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1580:  Added VLAN with VID == 1580 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1582:  Added VLAN with VID == 1582 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1591:  Added VLAN with VID == 1591 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1592:  Added VLAN with VID == 1592 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1594:  Added VLAN with VID == 1594 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1596:  Added VLAN with VID == 1596 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1597:  Added VLAN with VID == 1597 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1614:  Added VLAN with VID == 1614 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth0.1616:  Added VLAN with VID == 1616 to IF -:eth0:-
>[  OK  ]
>Bringing up interface eth1.10:  Added VLAN with VID == 10 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.11:  Added VLAN with VID == 11 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.12:  Added VLAN with VID == 12 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.13:  Added VLAN with VID == 13 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.14:  Added VLAN with VID == 14 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.15:  Added VLAN with VID == 15 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.1582:  Added VLAN with VID == 1582 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.16:  Added VLAN with VID == 16 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.17:  Added VLAN with VID == 17 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.18:  Added VLAN with VID == 18 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.19:  Added VLAN with VID == 19 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.20:  Added VLAN with VID == 20 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.21:  Added VLAN with VID == 21 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.22:  Added VLAN with VID == 22 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.23:  Added VLAN with VID == 23 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.24:  Added VLAN with VID == 24 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.25:  Added VLAN with VID == 25 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.26:  Added VLAN with VID == 26 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.27:  Added VLAN with VID == 27 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.28:  Added VLAN with VID == 28 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.29:  Added VLAN with VID == 29 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.30:  Added VLAN with VID == 30 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.31:  Added VLAN with VID == 31 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.32:  Added VLAN with VID == 32 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.33:  Added VLAN with VID == 33 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.34:  Added VLAN with VID == 34 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.35:  Added VLAN with VID == 35 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.36:  Added VLAN with VID == 36 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.37:  Added VLAN with VID == 37 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.38:  Added VLAN with VID == 38 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.39:  Added VLAN with VID == 39 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.40:  Added VLAN with VID == 40 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.41:  Added VLAN with VID == 41 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.42:  Added VLAN with VID == 42 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.43:  Added VLAN with VID == 43 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.44:  Added VLAN with VID == 44 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.45:  Added VLAN with VID == 45 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.46:  Added VLAN with VID == 46 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.47:  Added VLAN with VID == 47 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.48:  Added VLAN with VID == 48 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.49:  Added VLAN with VID == 49 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.50:  Added VLAN with VID == 50 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.51:  Added VLAN with VID == 51 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.52:  Added VLAN with VID == 52 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.53:  Added VLAN with VID == 53 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.54:  Added VLAN with VID == 54 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.55:  Added VLAN with VID == 55 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.56:  Added VLAN with VID == 56 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.57:  Added VLAN with VID == 57 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.58:  Added VLAN with VID == 58 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth1.59:  Added VLAN with VID == 59 to IF -:eth1:-
>[  OK  ]
>Bringing up interface eth2.10:  Added VLAN with VID == 10 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.11:  Added VLAN with VID == 11 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.12:  Added VLAN with VID == 12 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.13:  Added VLAN with VID == 13 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.14:  Added VLAN with VID == 14 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.15:  Added VLAN with VID == 15 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.1582:  Added VLAN with VID == 1582 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.16:  Added VLAN with VID == 16 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.17:  Added VLAN with VID == 17 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.18:  Added VLAN with VID == 18 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.19:  Added VLAN with VID == 19 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.2:  Added VLAN with VID == 2 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.20:  Added VLAN with VID == 20 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.21:  Added VLAN with VID == 21 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.22:  Added VLAN with VID == 22 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.23:  Added VLAN with VID == 23 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.24:  Added VLAN with VID == 24 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.25:  Added VLAN with VID == 25 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.26:  Added VLAN with VID == 26 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.27:  Added VLAN with VID == 27 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.28:  Added VLAN with VID == 28 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.29:  Added VLAN with VID == 29 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.30:  Added VLAN with VID == 30 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.31:  Added VLAN with VID == 31 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.32:  Added VLAN with VID == 32 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.33:  Added VLAN with VID == 33 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.34:  Added VLAN with VID == 34 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.35:  Added VLAN with VID == 35 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.36:  Added VLAN with VID == 36 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.37:  Added VLAN with VID == 37 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.38:  Added VLAN with VID == 38 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.39:  Added VLAN with VID == 39 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.40:  Added VLAN with VID == 40 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.41:  Added VLAN with VID == 41 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.42:  Added VLAN with VID == 42 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.43:  Added VLAN with VID == 43 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.44:  Added VLAN with VID == 44 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.45:  Added VLAN with VID == 45 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.46:  Added VLAN with VID == 46 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.47:  Added VLAN with VID == 47 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.48:  Added VLAN with VID == 48 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.49:  Added VLAN with VID == 49 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.50:  Added VLAN with VID == 50 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.51:  Added VLAN with VID == 51 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.52:  Added VLAN with VID == 52 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.53:  Added VLAN with VID == 53 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.54:  Added VLAN with VID == 54 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.55:  Added VLAN with VID == 55 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.56:  Added VLAN with VID == 56 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.57:  Added VLAN with VID == 57 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.58:  Added VLAN with VID == 58 to IF -:eth2:-
>[  OK  ]
>Bringing up interface eth2.59:  Added VLAN with VID == 59 to IF -:eth2:-
>[  OK  ]
>Bringing up interface br2:  [  OK  ]
>Bringing up interface br10:  [  OK  ]
>Bringing up interface br11:  [  OK  ]
>Bringing up interface br12:  [  OK  ]
>Bringing up interface br13:  [  OK  ]
>Bringing up interface br14:  [  OK  ]
>Bringing up interface br15:  [  OK  ]
>Bringing up interface br16:  [  OK  ]
>Bringing up interface br17:  [  OK  ]
>Bringing up interface br18:  [  OK  ]
>Bringing up interface br19:  [  OK  ]
>Bringing up interface br20:  [  OK  ]
>Bringing up interface br21:  [  OK  ]
>Bringing up interface br22:  [  OK  ]
>Bringing up interface br23:  [  OK  ]
>Bringing up interface br24:  [  OK  ]
>Bringing up interface br25:  [  OK  ]
>Bringing up interface br26:  [  OK  ]
>Bringing up interface br27:  [  OK  ]
>Bringing up interface br28:  [  OK  ]
>Bringing up interface br29:  [  OK  ]
>Bringing up interface br30:  [  OK  ]
>Bringing up interface br31:  [  OK  ]
>Bringing up interface br32:  [  OK  ]
>Bringing up interface br33:  [  OK  ]
>Bringing up interface br34:  [  OK  ]
>Bringing up interface br35:  [  OK  ]
>Bringing up interface br36:  [  OK  ]
>Bringing up interface br37:  [  OK  ]
>Bringing up interface br38:  [  OK  ]
>Bringing up interface br39:  [  OK  ]
>Bringing up interface br40:  [  OK  ]
>Bringing up interface br41:  [  OK  ]
>Bringing up interface br42:  [  OK  ]
>Bringing up interface br43:  [  OK  ]
>Bringing up interface br44:  [  OK  ]
>Bringing up interface br45:  [  OK  ]
>Bringing up interface br46:  [  OK  ]
>Bringing up interface br47:  [  OK  ]
>Bringing up interface br48:  [  OK  ]
>Bringing up interface br49:  [  OK  ]
>Bringing up interface br50:  [  OK  ]
>Bringing up interface br51:  [  OK  ]
>Bringing up interface br52:  [  OK  ]
>Bringing up interface br53:  [  OK  ]
>Bringing up interface br54:  [  OK  ]
>Bringing up interface br55:  [  OK  ]
>Bringing up interface br56:  [  OK  ]
>Bringing up interface br57:  [  OK  ]
>Bringing up interface br58:  [  OK  ]
>Bringing up interface br59:  [  OK  ]
>Starting restorecond: [  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>Starting mcstransd: [  OK  ]
>Starting mdmonitor: audit(1198013303.712:113): avc:  granted  null for  pid=14879 comm="mdadm" name="null" dev=tmpfs ino=1834 scontext=system_u:system_r:mdadm_t:s0 tcontext=system_u:object_r:null_device_t:s0 tclass=chr_file
>[  OK  ]
>Starting system message bus: Unknown username "gdm" in message bus configuration file
>[  OK  ]
>Mounting other filesystems:  [  OK  ]
>Starting sshd: [  OK  ]
>Starting exim: [  OK  ]
>Starting ConsoleKit: [  OK  ]
>Starting HAL daemon: [  OK  ]
>Added VLAN with VID == 2 to IF -:eth0.1568:-
>
>=============================================
>[ INFO: possible recursive locking detected ]
>2.6.24-0.107.rc5.git3.fc9 #1
>---------------------------------------------
>ifconfig/15011 is trying to acquire lock:
> (&vlan_netdev_xmit_lock_key){-+..}, at: [<c05d9450>] dev_mc_sync+0x1c/0x102
>
>but task is already holding lock:
> (&vlan_netdev_xmit_lock_key){-+..}, at: [<c05d51bd>] dev_set_rx_mode+0x14/0x3c
>
>other info that might help us debug this:
>2 locks held by ifconfig/15011:
> #0:  (rtnl_mutex){--..}, at: [<c05de4f7>] rtnl_lock+0xf/0x11
> #1:  (&vlan_netdev_xmit_lock_key){-+..}, at: [<c05d51bd>] dev_set_rx_mode+0x14/0x3c
>
>stack backtrace:
>Pid: 15011, comm: ifconfig Not tainted 2.6.24-0.107.rc5.git3.fc9 #1
> [<c040649a>] show_trace_log_lvl+0x1a/0x2f
> [<c0406d41>] show_trace+0x12/0x14
> [<c0407061>] dump_stack+0x6c/0x72
> [<c044cfb3>] __lock_acquire+0x815/0xb5f
> [<c044d6f5>] lock_acquire+0x7b/0x9e
> [<c063dcf5>] _spin_lock_bh+0x33/0x5d
> [<c05d9450>] dev_mc_sync+0x1c/0x102
> [<f8b24c96>] vlan_dev_set_multicast_list+0x15/0x17 [8021q]
> [<c05d5107>] __dev_set_rx_mode+0x7e/0x81
> [<c05d51d0>] dev_set_rx_mode+0x27/0x3c
> [<c05d749e>] dev_open+0x61/0x7b
> [<c05d60b0>] dev_change_flags+0xa4/0x152
> [<c0616b8d>] devinet_ioctl+0x211/0x518
> [<c061723b>] inet_ioctl+0x86/0xa4
> [<c05caf0b>] sock_ioctl+0x1ca/0x1eb
> [<c049cdf2>] do_ioctl+0x22/0x67
> [<c049d080>] vfs_ioctl+0x249/0x25c
> [<c049d0d5>] sys_ioctl+0x42/0x5d
> [<c0405252>] syscall_call+0x7/0xb
> =======================
>audit(1198013309.120:114): avc:  denied  { read } for  pid=15012 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1568.2 entered promiscuous mode
>audit(1198013309.158:115): dev=eth0.1568.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1568 entered promiscuous mode
>br57: no IPv6 routers present
>audit(1198013309.181:116): dev=eth0.1568 prom=256 old_prom=0 auid=4294967295
>device eth0 entered promiscuous mode
>audit(1198013309.205:117): dev=eth0 prom=256 old_prom=0 auid=4294967295
>br10: port 3(eth0.1568.2) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1597:-
>audit(1198013309.303:118): avc:  denied  { read } for  pid=15019 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1597.2 entered promiscuous mode
>br54: topology change detected, propagating
>br54: port 2(eth2.54) entering forwarding state
>br54: topology change detected, propagating
>br54: port 1(eth1.54) entering forwarding state
>audit(1198013309.391:119): dev=eth0.1597.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1597 entered promiscuous mode
>audit(1198013309.419:120): dev=eth0.1597 prom=256 old_prom=0 auid=4294967295
>br11: port 3(eth0.1597.2) entering learning state
>Added VLAN with VID == 1 to IF -:eth0.1442:-
>WARNING:  VLAN 1 does not work with many switches,
>consider another number if you have problems.
>audit(1198013309.530:121): avc:  denied  { read } for  pid=15026 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1442.1 entered promiscuous mode
>audit(1198013309.564:122): dev=eth0.1442.1 prom=256 old_prom=0 auid=4294967295
>device eth0.1442 entered promiscuous mode
>audit(1198013309.589:123): dev=eth0.1442 prom=256 old_prom=0 auid=4294967295
>br12: port 3(eth0.1442.1) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1561:-
>audit(1198013309.714:124): avc:  denied  { read } for  pid=15033 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1561.2 entered promiscuous mode
>audit(1198013309.756:125): dev=eth0.1561.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1561 entered promiscuous mode
>audit(1198013309.783:126): dev=eth0.1561 prom=256 old_prom=0 auid=4294967295
>br13: port 3(eth0.1561.2) entering learning state
>Added VLAN with VID == 1 to IF -:eth0.1454:-
>WARNING:  VLAN 1 does not work with many switches,
>consider another number if you have problems.
>audit(1198013309.928:127): avc:  denied  { read } for  pid=15052 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1454.1 entered promiscuous mode
>audit(1198013309.963:128): dev=eth0.1454.1 prom=256 old_prom=0 auid=4294967295
>device eth0.1454 entered promiscuous mode
>audit(1198013309.987:129): dev=eth0.1454 prom=256 old_prom=0 auid=4294967295
>br14: port 3(eth0.1454.1) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1578:-
>audit(1198013310.127:130): avc:  denied  { read } for  pid=15093 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1578.3 entered promiscuous mode
>audit(1198013310.168:131): dev=eth0.1578.3 prom=256 old_prom=0 auid=4294967295
>device eth0.1578 entered promiscuous mode
>audit(1198013310.188:132): dev=eth0.1578 prom=256 old_prom=0 auid=4294967295
>br15: port 3(eth0.1578.3) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1594:-
>audit(1198013310.321:133): avc:  denied  { read } for  pid=15138 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br58: no IPv6 routers present
>device eth0.1594.2 entered promiscuous mode
>audit(1198013310.370:134): dev=eth0.1594.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1594 entered promiscuous mode
>audit(1198013310.391:135): dev=eth0.1594 prom=256 old_prom=0 auid=4294967295
>br16: port 3(eth0.1594.2) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1594:-
>audit(1198013310.501:136): avc:  denied  { read } for  pid=15152 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br17: port 3(eth0.1594.3) entering learning state
>Added VLAN with VID == 5 to IF -:eth0.1596:-
>audit(1198013310.624:137): avc:  denied  { read } for  pid=15159 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br55: topology change detected, propagating
>br55: port 2(eth2.55) entering forwarding state
>br55: topology change detected, propagating
>br55: port 1(eth1.55) entering forwarding state
>device eth0.1596.5 entered promiscuous mode
>audit(1198013310.769:138): dev=eth0.1596.5 prom=256 old_prom=0 auid=4294967295
>device eth0.1596 entered promiscuous mode
>audit(1198013310.790:139): dev=eth0.1596 prom=256 old_prom=0 auid=4294967295
>br18: port 3(eth0.1596.5) entering learning state
>Added VLAN with VID == 6 to IF -:eth0.1442:-
>audit(1198013310.895:140): avc:  denied  { read } for  pid=15166 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br19: port 3(eth0.1442.6) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1443:-
>audit(1198013311.023:141): avc:  denied  { read } for  pid=15173 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1443.2 entered promiscuous mode
>audit(1198013311.055:142): dev=eth0.1443.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1443 entered promiscuous mode
>audit(1198013311.079:143): dev=eth0.1443 prom=256 old_prom=0 auid=4294967295
>br20: port 3(eth0.1443.2) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1575:-
>audit(1198013311.193:144): avc:  denied  { read } for  pid=15180 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1575.2 entered promiscuous mode
>audit(1198013311.234:145): dev=eth0.1575.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1575 entered promiscuous mode
>audit(1198013311.249:146): dev=eth0.1575 prom=256 old_prom=0 auid=4294967295
>br21: port 3(eth0.1575.2) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1576:-
>audit(1198013311.362:147): avc:  denied  { read } for  pid=15187 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1576.2 entered promiscuous mode
>audit(1198013311.400:148): dev=eth0.1576.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1576 entered promiscuous mode
>audit(1198013311.418:149): dev=eth0.1576 prom=256 old_prom=0 auid=4294967295
>br22: port 3(eth0.1576.2) entering learning state
>br59: no IPv6 routers present
>Added VLAN with VID == 3 to IF -:eth0.1536:-
>audit(1198013311.539:150): avc:  denied  { read } for  pid=15194 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1536.3 entered promiscuous mode
>audit(1198013311.586:151): dev=eth0.1536.3 prom=256 old_prom=0 auid=4294967295
>device eth0.1536 entered promiscuous mode
>audit(1198013311.607:152): dev=eth0.1536 prom=256 old_prom=0 auid=4294967295
>br23: port 3(eth0.1536.3) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1552:-
>audit(1198013311.777:153): avc:  denied  { read } for  pid=15201 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1552.2 entered promiscuous mode
>audit(1198013311.812:154): dev=eth0.1552.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1552 entered promiscuous mode
>audit(1198013311.833:155): dev=eth0.1552 prom=256 old_prom=0 auid=4294967295
>br24: port 3(eth0.1552.2) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1580:-
>br56: topology change detected, propagating
>br56: port 2(eth2.56) entering forwarding state
>audit(1198013311.945:156): avc:  denied  { read } for  pid=15208 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1580.3 entered promiscuous mode
>audit(1198013311.945:157): dev=eth0.1580.3 prom=256 old_prom=0 auid=4294967295
>device eth0.1580 entered promiscuous mode
>audit(1198013311.945:158): dev=eth0.1580 prom=256 old_prom=0 auid=4294967295
>br25: port 3(eth0.1580.3) entering learning state
>br56: topology change detected, propagating
>br56: port 1(eth1.56) entering forwarding state
>Added VLAN with VID == 2 to IF -:eth0.1507:-
>audit(1198013312.134:159): avc:  denied  { read } for  pid=15215 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1507.2 entered promiscuous mode
>audit(1198013312.173:160): dev=eth0.1507.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1507 entered promiscuous mode
>audit(1198013312.195:161): dev=eth0.1507 prom=256 old_prom=0 auid=4294967295
>br26: port 3(eth0.1507.2) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1507:-
>audit(1198013312.297:162): avc:  denied  { read } for  pid=15222 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br27: port 3(eth0.1507.3) entering learning state
>Added VLAN with VID == 4 to IF -:eth0.1536:-
>audit(1198013312.421:163): avc:  denied  { read } for  pid=15229 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br28: port 3(eth0.1536.4) entering learning state
>Added VLAN with VID == 4 to IF -:eth0.1580:-
>audit(1198013312.557:164): avc:  denied  { read } for  pid=15236 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br29: port 3(eth0.1580.4) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1592:-
>audit(1198013312.691:165): avc:  denied  { read } for  pid=15243 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1592.2 entered promiscuous mode
>audit(1198013312.727:166): dev=eth0.1592.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1592 entered promiscuous mode
>audit(1198013312.754:167): dev=eth0.1592 prom=256 old_prom=0 auid=4294967295
>br30: port 3(eth0.1592.2) entering learning state
>Added VLAN with VID == 4 to IF -:eth0.1597:-
>audit(1198013312.943:168): avc:  denied  { read } for  pid=15256 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br31: port 3(eth0.1597.4) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1597:-
>audit(1198013313.065:169): avc:  denied  { read } for  pid=15263 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br32: port 3(eth0.1597.3) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1466:-
>audit(1198013313.187:170): avc:  denied  { read } for  pid=15270 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br57: topology change detected, propagating
>device eth0.1466.2 entered promiscuous mode
>audit(1198013313.226:171): dev=eth0.1466.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1466 entered promiscuous mode
>audit(1198013313.226:172): dev=eth0.1466 prom=256 old_prom=0 auid=4294967295
>br33: port 3(eth0.1466.2) entering learning state
>br57: port 2(eth2.57) entering forwarding state
>br57: topology change detected, propagating
>br57: port 1(eth1.57) entering forwarding state
>Added VLAN with VID == 2 to IF -:eth0.1546:-
>audit(1198013313.383:173): avc:  denied  { read } for  pid=15277 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1546.2 entered promiscuous mode
>audit(1198013313.430:174): dev=eth0.1546.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1546 entered promiscuous mode
>audit(1198013313.451:175): dev=eth0.1546 prom=256 old_prom=0 auid=4294967295
>br34: port 3(eth0.1546.2) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1466:-
>audit(1198013313.558:176): avc:  denied  { read } for  pid=15284 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br35: port 3(eth0.1466.3) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1575:-
>audit(1198013313.679:177): avc:  denied  { read } for  pid=15291 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br36: port 3(eth0.1575.3) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1568:-
>audit(1198013313.884:178): avc:  denied  { read } for  pid=15298 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br37: port 3(eth0.1568.3) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1614:-
>audit(1198013314.008:179): avc:  denied  { read } for  pid=15305 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1614.2 entered promiscuous mode
>audit(1198013314.046:180): dev=eth0.1614.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1614 entered promiscuous mode
>audit(1198013314.067:181): dev=eth0.1614 prom=256 old_prom=0 auid=4294967295
>br38: port 3(eth0.1614.2) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1557:-
>audit(1198013314.165:182): avc:  denied  { read } for  pid=15312 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1557.2 entered promiscuous mode
>audit(1198013314.213:183): dev=eth0.1557.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1557 entered promiscuous mode
>audit(1198013314.238:184): dev=eth0.1557 prom=256 old_prom=0 auid=4294967295
>br39: port 3(eth0.1557.2) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1491:-
>audit(1198013314.348:185): avc:  denied  { read } for  pid=15319 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1491.2 entered promiscuous mode
>audit(1198013314.388:186): dev=eth0.1491.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1491 entered promiscuous mode
>audit(1198013314.415:187): dev=eth0.1491 prom=256 old_prom=0 auid=4294967295
>br40: port 3(eth0.1491.2) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1616:-
>br58: topology change detected, propagating
>br58: port 2(eth2.58) entering forwarding state
>br58: topology change detected, propagating
>br58: port 1(eth1.58) entering forwarding state
>audit(1198013314.572:188): avc:  denied  { read } for  pid=15326 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1616.3 entered promiscuous mode
>audit(1198013314.620:189): dev=eth0.1616.3 prom=256 old_prom=0 auid=4294967295
>device eth0.1616 entered promiscuous mode
>audit(1198013314.641:190): dev=eth0.1616 prom=256 old_prom=0 auid=4294967295
>br41: port 3(eth0.1616.3) entering learning state
>Added VLAN with VID == 5 to IF -:eth0.1597:-
>audit(1198013314.762:191): avc:  denied  { read } for  pid=15333 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br42: port 3(eth0.1597.5) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1596:-
>audit(1198013314.960:192): avc:  denied  { read } for  pid=15340 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br43: port 3(eth0.1596.3) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1582:-
>audit(1198013315.094:193): avc:  denied  { read } for  pid=15347 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1582.2 entered promiscuous mode
>audit(1198013315.131:194): dev=eth0.1582.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1582 entered promiscuous mode
>audit(1198013315.155:195): dev=eth0.1582 prom=256 old_prom=0 auid=4294967295
>br44: port 3(eth0.1582.2) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1591:-
>audit(1198013315.271:196): avc:  denied  { read } for  pid=15354 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1591.2 entered promiscuous mode
>audit(1198013315.307:197): dev=eth0.1591.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1591 entered promiscuous mode
>audit(1198013315.328:198): dev=eth0.1591 prom=256 old_prom=0 auid=4294967295
>br45: port 3(eth0.1591.2) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1596:-
>audit(1198013315.442:199): avc:  denied  { read } for  pid=15361 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br46: port 3(eth0.1596.2) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1569:-
>audit(1198013315.560:200): avc:  denied  { read } for  pid=15368 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1569.2 entered promiscuous mode
>audit(1198013315.597:201): dev=eth0.1569.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1569 entered promiscuous mode
>audit(1198013315.618:202): dev=eth0.1569 prom=256 old_prom=0 auid=4294967295
>br47: port 3(eth0.1569.2) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1582:-
>br59: topology change detected, propagating
>audit(1198013315.729:203): avc:  denied  { read } for  pid=15375 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br48: port 3(eth0.1582.3) entering learning state
>br59: port 2(eth2.59) entering forwarding state
>br59: topology change detected, propagating
>br59: port 1(eth1.59) entering forwarding state
>Added VLAN with VID == 2 to IF -:eth0.1515:-
>audit(1198013315.939:204): avc:  denied  { read } for  pid=15382 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1515.2 entered promiscuous mode
>audit(1198013315.987:205): dev=eth0.1515.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1515 entered promiscuous mode
>audit(1198013316.011:206): dev=eth0.1515 prom=256 old_prom=0 auid=4294967295
>br49: port 3(eth0.1515.2) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1515:-
>audit(1198013316.119:207): avc:  denied  { read } for  pid=15389 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br50: port 3(eth0.1515.3) entering learning state
>Added VLAN with VID == 2 to IF -:eth0.1514:-
>audit(1198013316.244:208): avc:  denied  { read } for  pid=15396 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>device eth0.1514.2 entered promiscuous mode
>audit(1198013316.279:209): dev=eth0.1514.2 prom=256 old_prom=0 auid=4294967295
>device eth0.1514 entered promiscuous mode
>audit(1198013316.298:210): dev=eth0.1514 prom=256 old_prom=0 auid=4294967295
>br51: port 3(eth0.1514.2) entering learning state
>Added VLAN with VID == 3 to IF -:eth0.1614:-
>audit(1198013316.405:211): avc:  denied  { read } for  pid=15403 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br52: port 3(eth0.1614.3) entering learning state
>Added VLAN with VID == 6 to IF -:eth0.1597:-
>audit(1198013316.530:212): avc:  denied  { read } for  pid=15410 comm="brctl" name="net" dev=proc ino=4026531866 scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=dir
>br53: port 3(eth0.1597.6) entering learning state
>
>Fedora release 7 (Moonshine)
>Kernel 2.6.24-0.107.rc5.git3.fc9 on an i686
>
>translate.ipvision.dk login: eth0.1568.2: no IPv6 routers present
>eth0.1442.1: no IPv6 routers present
>eth0.1454.1: no IPv6 routers present
>eth0.1597.2: no IPv6 routers present
>eth0.1578.3: no IPv6 routers present
>eth0.1561.2: no IPv6 routers present
>eth0.1594.2: no IPv6 routers present
>eth0.1443.2: no IPv6 routers present
>eth0.1596.5: no IPv6 routers present
>eth0.1594.3: no IPv6 routers present
>eth0.1442.6: no IPv6 routers present
>eth0.1576.2: no IPv6 routers present
>eth0.1575.2: no IPv6 routers present
>eth0.1507.2: no IPv6 routers present
>eth0.1552.2: no IPv6 routers present
>eth0.1536.3: no IPv6 routers present
>eth0.1580.3: no IPv6 routers present
>eth0.1536.4: no IPv6 routers present
>eth0.1507.3: no IPv6 routers present
>eth0.1580.4: no IPv6 routers present
>eth0.1597.4: no IPv6 routers present
>eth0.1592.2: no IPv6 routers present
>eth0.1546.2: no IPv6 routers present
>eth0.1597.3: no IPv6 routers present
>eth0.1466.2: no IPv6 routers present
>eth0.1568.3: no IPv6 routers present
>br10: topology change detected, propagating
>br10: port 3(eth0.1568.2) entering forwarding state
>br11: topology change detected, propagating
>br11: port 3(eth0.1597.2) entering forwarding state
>eth0.1466.3: no IPv6 routers present
>eth0.1614.2: no IPv6 routers present
>eth0.1575.3: no IPv6 routers present
>br12: topology change detected, propagating
>br12: port 3(eth0.1442.1) entering forwarding state
>br13: topology change detected, propagating
>br13: port 3(eth0.1561.2) entering forwarding state
>eth0.1491.2: no IPv6 routers present
>br14: topology change detected, propagating
>br14: port 3(eth0.1454.1) entering forwarding state
>eth0.1557.2: no IPv6 routers present
>eth0.1597.5: no IPv6 routers present
>br15: topology change detected, propagating
>br15: port 3(eth0.1578.3) entering forwarding state
>eth0.1591.2: no IPv6 routers present
>eth0.1596.3: no IPv6 routers present
>br16: topology change detected, propagating
>br16: port 3(eth0.1594.2) entering forwarding state
>eth0.1616.3: no IPv6 routers present
>br17: topology change detected, propagating
>br17: port 3(eth0.1594.3) entering forwarding state
>br18: topology change detected, propagating
>br18: port 3(eth0.1596.5) entering forwarding state
>br19: topology change detected, propagating
>br19: port 3(eth0.1442.6) entering forwarding state
>eth0.1582.2: no IPv6 routers present
>br20: topology change detected, propagating
>br20: port 3(eth0.1443.2) entering forwarding state
>eth0.1596.2: no IPv6 routers present
>eth0.1582.3: no IPv6 routers present
>br21: topology change detected, propagating
>br21: port 3(eth0.1575.2) entering forwarding state
>eth0.1569.2: no IPv6 routers present
>eth0.1515.3: no IPv6 routers present
>br22: topology change detected, propagating
>br22: port 3(eth0.1576.2) entering forwarding state
>eth0.1514.2: no IPv6 routers present
>br23: topology change detected, propagating
>eth0.1515.2: no IPv6 routers present
>br23: port 3(eth0.1536.3) entering forwarding state
>eth0.1614.3: no IPv6 routers present
>br24: topology change detected, propagating
>br24: port 3(eth0.1552.2) entering forwarding state
>br25: topology change detected, propagating
>br25: port 3(eth0.1580.3) entering forwarding state
>br26: topology change detected, propagating
>br26: port 3(eth0.1507.2) entering forwarding state
>eth0.1597.6: no IPv6 routers present
>br27: topology change detected, propagating
>br27: port 3(eth0.1507.3) entering forwarding state
>br28: topology change detected, propagating
>br28: port 3(eth0.1536.4) entering forwarding state
>br29: topology change detected, propagating
>br29: port 3(eth0.1580.4) entering forwarding state
>br30: topology change detected, propagating
>br30: port 3(eth0.1592.2) entering forwarding state
>br31: topology change detected, propagating
>br31: port 3(eth0.1597.4) entering forwarding state
>br32: topology change detected, propagating
>br32: port 3(eth0.1597.3) entering forwarding state
>br33: topology change detected, propagating
>br33: port 3(eth0.1466.2) entering forwarding state
>br34: topology change detected, propagating
>br34: port 3(eth0.1546.2) entering forwarding state
>br35: topology change detected, propagating
>br35: port 3(eth0.1466.3) entering forwarding state
>br36: topology change detected, propagating
>br36: port 3(eth0.1575.3) entering forwarding state
>br37: topology change detected, propagating
>br37: port 3(eth0.1568.3) entering forwarding state
>br38: topology change detected, propagating
>br38: port 3(eth0.1614.2) entering forwarding state
>br39: topology change detected, propagating
>br39: port 3(eth0.1557.2) entering forwarding state
>br40: topology change detected, propagating
>br40: port 3(eth0.1491.2) entering forwarding state
>br41: topology change detected, propagating
>br41: port 3(eth0.1616.3) entering forwarding state
>br42: topology change detected, propagating
>br42: port 3(eth0.1597.5) entering forwarding state
>br43: topology change detected, propagating
>br43: port 3(eth0.1596.3) entering forwarding state
>br44: topology change detected, propagating
>br44: port 3(eth0.1582.2) entering forwarding state
>br45: topology change detected, propagating
>br45: port 3(eth0.1591.2) entering forwarding state
>br46: topology change detected, propagating
>br46: port 3(eth0.1596.2) entering forwarding state
>br47: topology change detected, propagating
>br47: port 3(eth0.1569.2) entering forwarding state
>br48: topology change detected, propagating
>br48: port 3(eth0.1582.3) entering forwarding state
>br49: topology change detected, propagating
>br49: port 3(eth0.1515.2) entering forwarding state
>br50: topology change detected, propagating
>br50: port 3(eth0.1515.3) entering forwarding state
>br51: topology change detected, propagating
>br51: port 3(eth0.1514.2) entering forwarding state
>br52: topology change detected, propagating
>br52: port 3(eth0.1614.3) entering forwarding state
>Cbr53: topology change detected, propagating
>br53: port 3(eth0.1597.6) entering forwarding state
>

Actions: View

Attachments on bug 426164: 289953 | 294083