Attachment 290020 Details for Bug 425818 – after reboot with no xorg.conf file

after reboot with no xorg.conf file

Xorg.0.log (text/plain), 23.23 KB, created by James Morris on 2007-12-19 13:46:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James Morris

Created: 2007-12-19 13:46:37 UTC

Size: 23.23 KB

patch

obsolete

>
>X.Org X Server 1.4.99.1
>Release Date: 5 September 2007
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.20-1.3002.fc6xen x86_64 
>Current Operating System: Linux macbook 2.6.24-0.107.rc5.git3.fc9 #1 SMP Fri Dec 14 12:15:01 EST 2007 x86_64
>Build Date: 10 December 2007  05:01:35PM
>Build ID: xorg-x11-server 1.4.99.1-0.13.fc9 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 20 00:38:42 2007
>(EE) Unable to locate/open config file
>(II) Loader magic: 0x79a560
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.3
>	X.Org Video Driver: 3.0
>	X.Org XInput driver : 2.0
>	X.Org Server Extension : 0.3
>	X.Org Font Renderer : 0.5
>(II) Loader running on linux
>(--) using VT number 7
>
>(--) PCI:*(0@0:2:0) unknown vendor (0x8086) Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x50380000/524288, 0x40000000/268435456, 0x50400000/262144, I/O @ 0x000020e0/8
>(--) PCI: (0@0:2:1) unknown vendor (0x8086) Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x50300000/524288
>(==) Matched intel for the autoconfigured driver
>New driver is "intel"
>(==) Using default built-in configuration (39 lines)
>(==) --- Start of built-in configuration ---
>	Section "Device"
>		Identifier	"Builtin Default intel Device 0"
>		Driver	"intel"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default intel Screen 0"
>		Device	"Builtin Default intel Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default fbdev Device 0"
>		Driver	"fbdev"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default fbdev Screen 0"
>		Device	"Builtin Default fbdev Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vesa Device 0"
>		Driver	"vesa"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vesa Screen 0"
>		Device	"Builtin Default vesa Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vga Device 0"
>		Driver	"vga"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vga Screen 0"
>		Device	"Builtin Default vga Device 0"
>	EndSection
>	Section "ServerLayout"
>		Identifier	"Builtin Default Layout"
>		Screen	"Builtin Default intel Screen 0"
>		Screen	"Builtin Default fbdev Screen 0"
>		Screen	"Builtin Default vesa Screen 0"
>		Screen	"Builtin Default vga Screen 0"
>	EndSection
>(==) --- End of built-in configuration ---
>(==) ServerLayout "Builtin Default Layout"
>(**) |-->Screen "Builtin Default intel Screen 0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default intel Device 0"
>(==) No monitor specified for screen "Builtin Default intel Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default fbdev Device 0"
>(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vesa Screen 0" (2)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vesa Device 0"
>(==) No monitor specified for screen "Builtin Default vesa Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vga Screen 0" (3)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vga Device 0"
>(==) No monitor specified for screen "Builtin Default vga Screen 0".
>	Using a default monitor configuration.
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(==) No FontPath specified.  Using compiled-in default.
>(==) FontPath set to:
>	catalogue:/etc/X11/fontpath.d,
>	built-ins
>(==) ModulePath set to "/usr/lib64/xorg/modules"
>(==) |-->Input Device "<default pointer>"
>(==) |-->Input Device "<default keyboard>"
>(==) The core pointer device wasn't specified explicitly in the layout.
>	Using the default mouse configuration.
>(==) The core keyboard device wasn't specified explicitly in the layout.
>	Using the default keyboard configuration.
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 0.3
>(==) AIGLX enabled
>(==) Exporting typical set of GLX visuals
>(II) Loading extension GLX
>(II) LoadModule: "freetype"
>(II) Loading /usr/lib64/xorg/modules/fonts//libfreetype.so
>(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>	compiled for 1.4.99.1, module version = 2.1.0
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.5
>(II) Loading font FreeType
>(II) LoadModule: "record"
>(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension RECORD
>(II) LoadModule: "dri"
>(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "intel"
>(II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 2.2.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 3.0
>(II) LoadModule: "fbdev"
>(II) Loading /usr/lib64/xorg/modules/drivers//fbdev_drv.so
>(II) Module fbdev: vendor="X.Org Foundation"
>	compiled for 1.4.0.1, module version = 0.3.1
>	ABI class: X.Org Video Driver, version 3.0
>(II) LoadModule: "vesa"
>(II) Loading /usr/lib64/xorg/modules/drivers//vesa_drv.so
>(II) Module vesa: vendor="X.Org Foundation"
>	compiled for 1.4.0.1, module version = 1.3.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 3.0
>(II) LoadModule: "vga"
>(WW) Warning, couldn't open module vga
>(II) UnloadModule: "vga"
>(EE) Failed to load module "vga" (module does not exist, 0)
>(II) LoadModule: "mouse"
>(II) Loading /usr/lib64/xorg/modules/input//mouse_drv.so
>(II) Module mouse: vendor="X.Org Foundation"
>	compiled for 1.4.0.1, module version = 1.2.3
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) LoadModule: "kbd"
>(II) Loading /usr/lib64/xorg/modules/input//kbd_drv.so
>(II) Module kbd: vendor="X.Org Foundation"
>	compiled for 1.4.0.1, module version = 1.2.2
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
>	965GM, 965GME/GLE, G33, Q35, Q33
>(II) FBDEV: driver for framebuffer: fbdev
>(II) VESA: driver for VESA chipsets: vesa
>(II) Primary Device is: PCI 00@00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(WW) Falling back to old probe method for fbdev
>(II) Loading sub module "fbdevhw"
>(II) LoadModule: "fbdevhw"
>(II) Loading /usr/lib64/xorg/modules/linux//libfbdevhw.so
>(II) Module fbdevhw: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 0.0.2
>	ABI class: X.Org Video Driver, version 3.0
>(EE) open /dev/fb0: No such file or directory
>(WW) Falling back to old probe method for vesa
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Loading /usr/lib64/xorg/modules//libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 3.0
>(II) Loading sub module "vbe"
>(II) LoadModule: "vbe"
>(II) Loading /usr/lib64/xorg/modules//libvbe.so
>(II) Module vbe: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 1.1.0
>	ABI class: X.Org Video Driver, version 3.0
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib64/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 3.0
>(II) intel(0): Creating default Display subsection in Screen section
>	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (==) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
>(--) intel(0): Chipset: "945GM"
>(--) intel(0): Linear framebuffer at 0x40000000
>(--) intel(0): IO registers at addr 0x50380000
>(II) intel(0): 2 display pipes available.
>(==) intel(0): Using EXA for acceleration
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"(II) Module "i2c" already built-in
>(II) intel(0): Output VGA has no monitor section
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): Output LVDS has no monitor section
>(II) intel(0): I2C bus "LVDSDDC_C" initialized.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): EDID vendor "APP", prod id 40028
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Reloading /usr/lib64/xorg/modules//libint10.so
>(II) intel(0): initializing int10
>(WW) intel(0): Bad V_BIOS checksum
>(II) intel(0): Primary V_BIOS segment is: 0xc000
>(II) intel(0): VESA BIOS detected
>(II) intel(0): VESA VBE Version 3.0
>(II) intel(0): VESA VBE Total Mem: 16064 kB
>(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
>(II) intel(0): VESA VBE OEM Software Rev: 1.0
>(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
>(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
>(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
>(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
>(II) intel(0): Output TMDS-1 has no monitor section
>(II) intel(0): SDVO device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
>(II) intel(0): No SDVO device found on SDVOC
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
>(II) intel(0): Output TV has no monitor section
>(II) intel(0): Current clock rate multiplier: 1
>(II) intel(0): EDID vendor "APP", prod id 40028
>(II) intel(0): Output VGA disconnected
>(II) intel(0): Output LVDS connected
>(II) intel(0): Output TMDS-1 disconnected
>(II) intel(0): Output TV disconnected
>(II) intel(0): Output LVDS using initial mode 1280x800
>(II) intel(0): Monitoring connected displays enabled
>(II) intel(0): detected 256 kB GTT.
>(II) intel(0): detected 16124 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Will not try to enable page flipping
>(==) intel(0): Triple buffering disabled
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) intel(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib64/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.3
>(II) Loading sub module "exa"
>(II) LoadModule: "exa"
>(II) Loading /usr/lib64/xorg/modules//libexa.so
>(II) Module exa: vendor="X.Org Foundation"
>	compiled for 1.4.99.1, module version = 2.4.0
>	ABI class: X.Org Video Driver, version 3.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
>(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
>(WW) intel(0): PP_STATUS after: on, ready, sequencing on
>(II) UnloadModule: "fbdev"
>(II) Unloading /usr/lib64/xorg/modules/drivers//fbdev_drv.so
>(II) UnloadModule: "fbdevhw"
>(II) Unloading /usr/lib64/xorg/modules/linux//libfbdevhw.so
>(II) UnloadModule: "vesa"
>(II) Unloading /usr/lib64/xorg/modules/drivers//vesa_drv.so
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) intel(0): Kernel reported 232960 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 931836 kB available
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card1
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card2
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card3
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card4
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card5
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card6
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card7
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card8
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card9
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card10
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card11
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card12
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card13
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card14
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenByBusid: drmOpenMinor returns -2
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card1
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card2
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card3
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card4
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card5
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card6
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card7
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card8
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card9
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card10
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card11
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card12
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card13
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card14
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is -1, (No such file or directory)
>drmOpenDevice: Open failed
>(EE) [drm] drmOpen failed.
>(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
>(==) intel(0): VideoRam: 262144 KB
>(**) intel(0): Framebuffer compression enabled
>(**) intel(0): Tiling enabled
>(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
>(II) intel(0): Page Flipping disabled
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) EXA(0): Offscreen pixmap area of 19660800 bytes
>(II) EXA(0): Driver registered support for the following operations:
>(II)         Solid
>(II)         Copy
>(II)         Composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): Current clock rate multiplier: 1
>(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00fbf000 (pgoffset 4031)
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
>(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f020000 physical
>)
>(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003f620000 physical
>)
>(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003f621000 physical
>)
>(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
>(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000003f633000 physical
>)
>(II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
>(II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(WW) intel(0): ESR is 0x00000010, page table error
>(WW) intel(0): PGTBL_ER is 0x00000102, host pte data, display B pte
>(WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled
>(WW) intel(0): PRB0_HEAD (0x00e1c3ac) and PRB0_TAIL (0x0001c368) indicate ring buffer not flushed
>(WW) intel(0): Existing errors found in hardware state.
>Error in I830WaitLpRing(), timeout for 2 seconds
>pgetbl_ctl: 0x3ffc0001 pgetbl_err: 0x102
>ipeir: 0 iphdr: 7d8e0001
>LP ring tail: 1c370 head: 1c3ac len: 1f001 start 0
>eir: 0 esr: 10 emr: ffff
>instdone: 4081 instpm: 0
>memmode: 306 instps: 800f00c4
>hwstam: ffff ier: 0 imr: ffff iir: 0
>Ring at virtual 0xad468000 head 0x1c3ac tail 0x1c370 count 32753
>	0001c32c: 00070000
>	0001c330: 00000300
>	0001c334: 00000743
>	0001c338: 000fff00
>	0001c33c: 000020c0
>	0001c340: 00000000
>	0001c344: 00008224
>	0001c348: 00000003
>	0001c34c: 00000000
>	0001c350: 00000000
>	0001c354: 0000049b
>	0001c358: 00000000
>	0001c35c: 00000000
>	0001c360: 02000011
>	0001c364: 00000000
>	0001c368: 02000011
>	0001c36c: 00000000
>	0001c370: 0000e9a0
>	0001c374: 00000184
>	0001c378: 00000000
>	0001c37c: 0000b490
>	0001c380: 00003984
>	0001c384: 00000000
>	0001c388: 00000006
>	0001c38c: 00000003
>	0001c390: 00000000
>	0001c394: 00000020
>	0001c398: 00000000
>	0001c39c: 003f0000
>	0001c3a0: 00ff4822
>	0001c3a4: 00ff0000
>	0001c3a8: 00fe0001
>	0001c3ac: 00001270
>Ring end
>space: 52 wanted 131064
>
>Fatal server error:
>lockup
>

Actions: View

Attachments on bug 425818: 289715 | 289716 | 290015 | 290016 | 290017 | 290020