Attachment 290076 Details for Bug 426313 – dump of /var/log/dmesg

dump of /var/log/dmesg

dmesg.txt (text/plain), 22.98 KB, created by Uwe Kubosch on 2007-12-19 22:57:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Uwe Kubosch

Created: 2007-12-19 22:57:00 UTC

Size: 22.98 KB

patch

obsolete

>Linux version 2.6.23.9-85.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Dec 7 15:49:59 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe87c00 (usable)
> BIOS-e820: 000000007fe87c00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 523911) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523911
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   523911
>On node 0 totalpages: 523911
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292234 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FC0E0, 0014 (r0 DELL  )
>ACPI: RSDT 7FE8818A, 0048 (r1 DELL    M07     27D70403 ASL        61)
>ACPI: FACP 7FE89000, 0074 (r1 DELL    M07     27D70403 ASL        61)
>ACPI: DSDT 7FE89C00, 51B9 (r1 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS 7FE98400, 0040
>ACPI: HPET 7FE89700, 0038 (r1 DELL    M07            1 ASL        61)
>ACPI: APIC 7FE89800, 0068 (r1 DELL    M07     27D70403 ASL        47)
>ACPI: ASF! 7FE89400, 005B (r16 DELL    M07     27D70403 ASL        61)
>ACPI: MCFG 7FE897C0, 003E (r16 DELL    M07     27D70403 ASL        61)
>ACPI: SLIC 7FE8989C, 0176 (r1 DELL    M07     27D70403 ASL        61)
>ACPI: TCPA 7FE89B00, 0032 (r1 DELL    M07     27D70403 ASL        61)
>ACPI: BOOT 7FE893C0, 0028 (r1 DELL    M07     27D70403 ASL        61)
>ACPI: SSDT 7FE88215, 04DC (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 519818
>Kernel command line: ro root=/dev/LogVolGroup00/root rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2163.872 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2069136k/2095644k available (2184k kernel code, 25316k reserved, 1116k data, 280k init, 1178140k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc06222f5 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc06222f5   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4331.20 BogoMIPS (lpj=2165602)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4327.57 BogoMIPS (lpj=2163787)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
>Total of 2 processors activated (8658.77 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 4116441251 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 16:14:20  Date: 12/19/07
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfaf26, last bus=14
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -  00, should be A9 [20070126]
>ACPI: SSDT 7FE881D2, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
>pnp: 00:02: ioport range 0x1008-0x100f has been reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
>pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
>pnp: 00:03: ioport range 0x1060-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
>pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
>pnp: 00:08: ioport range 0xc80-0xcaf has been reserved
>pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved
>pnp: 00:08: ioport range 0x910-0x91f has been reserved
>pnp: 00:08: ioport range 0x920-0x92f has been reserved
>pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved
>pnp: 00:08: ioport range 0x930-0x97f has been reserved
>pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
>pnp: 00:0c: ioport range 0xcb0-0xcbb has been reserved
>pnp: 00:0c: iomem range 0xfed40000-0xfed44fff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: ed000000-efefffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: ecf00000-ecffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: ece00000-ecefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: d000-dfff
>  MEM window: ecc00000-ecdfffff
>  PREFETCH window: e0000000-e01fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: ecb00000-ecbfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3592k freed
>Simple Boot Flag at 0x79 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1198080860.620:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4BB254D1F8000763
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7FE8893C, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 7FE886F1, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FE88B80, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 7FE888B7, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (44 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:330:237
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa44713/0x200000
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 4 ports detected
>ata1.00: ATA-7: Hitachi HTS721010G9SA00, MCZOC10H, max UDMA/100
>ata1.00: 195371568 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>usb 2-1.2: new full speed USB device using uhci_hcd and address 3
>ata2.00: ATAPI: SONY DVD+/-RW DW-Q58A, UDS1, max UDMA/33
>usb 2-1.2: configuration #1 chosen from 1 choice
>hub 2-1.2:1.0: USB hub found
>hub 2-1.2:1.0: 3 ports detected
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72101 MCZO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            SONY     DVD+-RW DW-Q58A  UDS1 PQ: 0 ANSI: 5
>usb 2-1.4: new full speed USB device using uhci_hcd and address 4
>usb 2-1.4: configuration #1 chosen from 1 choice
>usb 2-1.2.2: new full speed USB device using uhci_hcd and address 5
>usb 2-1.2.2: configuration #1 chosen from 1 choice
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1198080866.083:2): selinux=0 auid=4294967295
>Clocksource tsc unstable (delta = -88368026 ns)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: Battery Slot [BAT0] (battery present)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
>mmc0: SDHCI at 0xecbff400 irq 18 DMA
>input: Lid Switch as /class/input/input3
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SBTN]
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.22kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>ACPI: AC Adapter [AC] (on-line)
>tg3.c:v3.81.1 (October 18, 2007)
>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:39:bf:ea
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>input: PC Speaker as /class/input/input6
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>input: Video Bus as /class/input/input7
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>kvm: disabled by bios
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 4194296k swap on /dev/mapper/LogVolGroup00-swap.  Priority:-1 extents:1 across:4194296k

Actions: View

Attachments on bug 426313: 290075 | 290076