Attachment 290233 Details for Bug 426358 – dmesg bnx2 1.6.8

dmesg bnx2 1.6.8

dmesg.bug (text/plain), 21.85 KB, created by Marcus Alves Grando on 2007-12-21 12:37:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Marcus Alves Grando

Created: 2007-12-21 12:37:30 UTC

Size: 21.85 KB

patch

obsolete

>Linux version 2.6.9-67.0.1.EL.TERRAsmp (root@leonora.hst.xxx) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Fri Dec 21 09:33:24 BRST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
> BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
> BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
>17535MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f4f80
>NX (Execute Disable) protection: active
>On node 0 totalpages: 4718591
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:16
>  HighMem zone: 4489215 pages, LIFO batch:16
>DMI 2.3 present.
>HP DL585 G2 detected, forcing pci=nommconf
>Using APIC driver default
>ACPI: RSDP (v002 HP                                    ) @ 0x000f4f00
>ACPI: XSDT (v001 HP     A07      0x00000002 Ò 0x0000162e) @ 0x7fe50780
>ACPI: FADT (v003 HP     A07      0x00000002 Ò 0x0000162e) @ 0x7fe50800
>ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x7fe50100
>ACPI: MCFG (v001 HP     ProLiant 0x00000001  0x00000000) @ 0x7fe50180
>ACPI: HPET (v001 HP     A07      0x00000002 Ò 0x0000162e) @ 0x7fe501c0
>ACPI: SPMI (v005 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x7fe50200
>ACPI: MADT (v001 HP     00000083 0x00000002  0x00000000) @ 0x7fe50240
>ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x7fe50380
>ACPI: DSDT (v001 HP         DSDT 0x00000001 INTL 0x20030228) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x908
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>Processor #2 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>Processor #4 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>Processor #6 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>Processor #3 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>Processor #5 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>Processor #7 15:1 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>Enabling APIC mode:  Flat.  Using 0 I/O APICs
>ACPI: IOAPIC (id[0x08] address[0xefdf0000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 17, address 0xefdf0000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xf9fd0000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 17, address 0xf9fd0000, GSI 24-30
>ACPI: IOAPIC (id[0x0a] address[0xf9fe0000] gsi_base[31])
>IOAPIC[2]: apic_id 10, version 17, address 0xf9fe0000, GSI 31-37
>ACPI: IOAPIC (id[0x0b] address[0xf9ff0000] gsi_base[38])
>IOAPIC[3]: apic_id 11, version 17, address 0xf9ff0000, GSI 38-61
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: NMI_SRC (dfl dfl global_irq 28)
>ACPI: NMI_SRC (dfl dfl global_irq 35)
>ACPI: HPET id: 0x10228201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ debug
>mapped APIC to ffffd000 (fee00000)
>Initializing CPU#0
>CPU 0 irqstacks, hard=c03f6000 soft=c03d6000
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Console: colour VGA+ 80x25
>spurious 8259A interrupt: IRQ7.
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 16620396k/18874364k available (1892k kernel code, 154096k reserved, 767k data, 192k init, 15857980k highmem)
>Using HPET for base-timer
>Using HPET for gettimeofday
>Detected 2612.367 MHz processor.
>Using hpet for high-res timesource
>Calibrating delay using timer specific routine.. 5226.46 BogoMIPS (lpj=2613230)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>CPU0: AMD Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
>per-CPU timeslice cutoff: 2925.05 usecs.
>task migration cache decay timeout: 2 msecs.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c03f7000 soft=c03d7000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5224.19 BogoMIPS (lpj=2612099)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
>Booting processor 2/2 eip 3000
>CPU 2 irqstacks, hard=c03f8000 soft=c03d8000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5224.19 BogoMIPS (lpj=2612095)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 2(2) -> Core 0
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: AMD Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
>Booting processor 3/3 eip 3000
>CPU 3 irqstacks, hard=c03f9000 soft=c03d9000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5224.10 BogoMIPS (lpj=2612052)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 3(2) -> Core 1
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: AMD Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
>Booting processor 4/4 eip 3000
>CPU 4 irqstacks, hard=c03fa000 soft=c03da000
>Initializing CPU#4
>Calibrating delay using timer specific routine.. 5224.20 BogoMIPS (lpj=2612103)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 4(2) -> Core 0
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#4.
>CPU4: AMD Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
>Booting processor 5/5 eip 3000
>CPU 5 irqstacks, hard=c03fb000 soft=c03db000
>Initializing CPU#5
>Calibrating delay using timer specific routine.. 5224.15 BogoMIPS (lpj=2612075)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 5(2) -> Core 1
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#5.
>CPU5: AMD Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
>Booting processor 6/6 eip 3000
>CPU 6 irqstacks, hard=c03fc000 soft=c03dc000
>Initializing CPU#6
>Calibrating delay using timer specific routine.. 5224.14 BogoMIPS (lpj=2612070)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 6(2) -> Core 0
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#6.
>CPU6: AMD Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
>Booting processor 7/7 eip 3000
>CPU 7 irqstacks, hard=c03fd000 soft=c03dd000
>Initializing CPU#7
>Calibrating delay using timer specific routine.. 5224.17 BogoMIPS (lpj=2612085)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 7(2) -> Core 1
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#7.
>CPU7: AMD Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
>Total of 8 processors activated (41795.61 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>checking TSC synchronization across 8 CPUs: 
>CPU#0 had 1234459 usecs TSC skew, fixed it up.
>CPU#1 had 0 usecs TSC skew, fixed it up.
>CPU#2 had 0 usecs TSC skew, fixed it up.
>CPU#3 had 0 usecs TSC skew, fixed it up.
>CPU#4 had 0 usecs TSC skew, fixed it up.
>CPU#5 had 0 usecs TSC skew, fixed it up.
>CPU#6 had 0 usecs TSC skew, fixed it up.
>CPU#7 had 0 usecs TSC skew, fixed it up.
>Brought up 8 CPUs
>zapping low mappings.
>checking if image is initramfs... it is
>Freeing initrd memory: 473k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 3.00 entry at 0xf0072, last bus=81
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:09.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
>ACPI: PCI Root Bridge [PCI1] (00:40)
>PCI: Probing PCI hardware (bus 40)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
>ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
>ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *10
>ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 169
>ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 23 (level, high) -> IRQ 177
>ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 (level, high) -> IRQ 185
>ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, high) -> IRQ 193
>ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 17 (level, high) -> IRQ 201
>ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 17 (level, high) -> IRQ 201
>ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 16 (level, high) -> IRQ 193
>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, high) -> IRQ 193
>ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 19 (level, high) -> IRQ 209
>ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, high) -> IRQ 193
>ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 18 (level, high) -> IRQ 185
>ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 19 (level, high) -> IRQ 209
>ACPI: PCI Interrupt 0000:41:01.0[A] -> GSI 31 (level, low) -> IRQ 217
>ACPI: PCI Interrupt 0000:41:02.0[A] -> GSI 32 (level, low) -> IRQ 225
>PCI: Device 00:00 not found by BIOS
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1198239445.210:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 440D572ED3400BC8
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>PCI: Found HT MSI mapping on 0000:00:0c.0 with capability enabled
>PCI: Found HT MSI mapping on 0000:00:0d.0 with capability enabled
>PCI: Found HT MSI mapping on 0000:00:0e.0 with capability enabled
>PCI: Found HT MSI mapping on 0000:40:0b.0 with capability enabled
>PCI: Found HT MSI mapping on 0000:40:0c.0 with capability enabled
>PCI: Found HT MSI mapping on 0000:40:0d.0 with capability enabled
>PCI: Found HT MSI mapping on 0000:40:0e.0 with capability enabled
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports C1)
>ACPI: Processor [CPU1] (supports C1)
>ACPI: Processor [CPU2] (supports C1)
>ACPI: Processor [CPU3] (supports C1)
>ACPI: Processor [CPU4] (supports C1)
>ACPI: Processor [CPU5] (supports C1)
>ACPI: Processor [CPU6] (supports C1)
>ACPI: Processor [CPU7] (supports C1)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
>NFORCE-CK804: chipset revision 163
>NFORCE-CK804: not 100% native mode: will probe irqs later
>NFORCE-CK804: 0000:00:06.0 (rev a3) UDMA133 controller
>    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
>Probing IDE interface ide0...
>hda: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 1048576 (order: 10, 4194304 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI wakeup devices: 
>
>ACPI: (supports S0 S4 S5)
>Freeing unused kernel memory: 192k freed
>SCSI subsystem initialized
>HP CISS Driver (v 2.6.16.RH1)
>cciss: Device 0x3230 has been found at bus 8 dev 0 func 0
>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, high) -> IRQ 193
>MSI INIT SUCCESS
>cciss: using DAC cycles
>      blocks= 859853201 block_size= 512
>      heads= 255, sectors= 32, cylinders= 105375
>
>      blocks= 859853201 block_size= 512
>      heads= 255, sectors= 32, cylinders= 105375
>
> cciss/c0d0: p1 p2 p3 p4
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-67.0.1.EL.TERRAsmp
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.8 (October 17, 2007)
>ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 19 (level, high) -> IRQ 209
>divert: allocating divert_blk for eth0
>eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem f4000000, IRQ 209, node addr 0019bbcde27c
>ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, high) -> IRQ 193
>divert: allocating divert_blk for eth1
>eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem f6000000, IRQ 193, node addr 0019bbcde27e
>ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 18 (level, high) -> IRQ 185
>divert: allocating divert_blk for eth2
>eth2: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem f0000000, IRQ 185, node addr 0019bbcdd4fc
>ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 19 (level, high) -> IRQ 209
>divert: allocating divert_blk for eth3
>eth3: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem f2000000, IRQ 209, node addr 0019bbcdd4fe
>ACPI: PCI Interrupt 0000:41:01.0[A] -> GSI 31 (level, low) -> IRQ 217
>divert: allocating divert_blk for eth4
>eth4: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem fc000000, IRQ 217, node addr 001635820a2e
>ACPI: PCI Interrupt 0000:41:02.0[A] -> GSI 32 (level, low) -> IRQ 225
>divert: allocating divert_blk for eth5
>eth5: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem fa000000, IRQ 225, node addr 001635820a30
>MC: drivers/edac/edac_mc.c version MC $Revision: 1.3 $
>MC0: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:18.2 (0000:00:18.2)
>MC1: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:19.2 (0000:00:19.2)
>MC2: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:1a.2 (0000:00:1a.2)
>MC3: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:1b.2 (0000:00:1b.2)
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 17 (level, high) -> IRQ 201
>uhci_hcd 0000:01:04.4: UHCI Host Controller
>uhci_hcd 0000:01:04.4: irq 201, io base 00003800
>uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 23 (level, high) -> IRQ 177
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: irq 177, pci mem f883e000
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 169
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: irq 169, pci mem f8840000
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 10 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>relatime: Running on all filesystems with 43200 interval
>ACPI: Power Button (FF) [PWRF]
>usb 1-1: new full speed USB device using address 2
>input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
>input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
>EXT3 FS on cciss/c0d0p2, internal journal
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>cdrom: open failed.
>usb 1-2: new full speed USB device using address 3
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 7 ports detected
>ohci_hcd 0000:00:02.0: wakeup
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on cciss/c0d0p1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on cciss/c0d0p4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 2-6: new high speed USB device using address 3
>Adding 2040244k swap on /dev/cciss/c0d0p3.  Priority:-1 extents:1
>hub 2-6:1.0: USB hub found
>hub 2-6:1.0: 4 ports detected
>usb 3-3: new low speed USB device using address 2
>input: USB HID v1.00 Keyboard [ST Microelectronics P2-CIM-USB] on usb-0000:00:02.0-3
>input: USB HID v1.00 Mouse [ST Microelectronics P2-CIM-USB] on usb-0000:00:02.0-3
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (32768 buckets, 262144 max) - 340 bytes per conntrack

Actions: View

Attachments on bug 426358: 290233