Attachment 290276 Details for Bug 426471 – the dmesg file from a successful boot

the dmesg file from a successful boot

dmesg (text/plain), 12.37 KB, created by Eliran Itzhak on 2007-12-21 21:43:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Eliran Itzhak

Created: 2007-12-21 21:43:43 UTC

Size: 12.37 KB

patch

obsolete

>Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 21:41:26 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
> BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
> BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>383MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 98288) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    98288
>  HighMem     98288 ->    98288
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->    98288
>On node 0 totalpages: 98288
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 735 pages used for memmap
>  Normal zone: 93457 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F5890, 0014 (r0 MITAC )
>ACPI: RSDT 17FF3000, 0028 (r1 HP     HPCCD HW        2 AWRD        0)
>ACPI: FACP 17FF3040, 0074 (r1 HP     HPCCD HW        2 AWRD        0)
>ACPI: DSDT 17FF30C0, 1F12 (r1 MITAC  AWRDACPI     1000 MSFT  100000A)
>ACPI: FACS 17FF0000, 0040
>ACPI: PM-Timer IO Port: 0x4008
>Allocating PCI resources starting at 20000000 (gap: 18000000:e7ff0000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 97521
>Kernel command line: ro root=LABEL=myroot rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0130d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 451.029 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 380912k/393152k available (2184k kernel code, 11552k reserved, 1116k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd8800000 - 0xff7fe000   ( 623 MB)
>    lowmem  : 0xc0000000 - 0xd7ff0000   ( 383 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622165 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622165   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 902.92 BogoMIPS (lpj=451460)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 1c08)
>CPU0: Intel Pentium III (Katmai) stepping 03
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 11:53:16  Date: 12/21/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>* this clock source is slow. Consider trying other clock sources
>PCI quirk: region 4000-403f claimed by PIIX4 ACPI
>PCI quirk: region 5000-500f claimed by PIIX4 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
>pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
>pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: e4000000-e5ffffff
>  PREFETCH window: e6000000-e6ffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 3592k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1198237997.846:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key D5E5FC8EDCF186B6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 2 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:121:884
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 845k
>Marking TSC unstable due to: TSC halts in idle.
>Time: acpi_pm clocksource has been installed.
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 3, io base 0x0000e000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>usb 1-2: configuration #1 chosen from 1 choice
>input: KYE WebScroll+ as /class/input/input2
>input: USB HID v1.10 Mouse [KYE WebScroll+] on usb-0000:00:07.2-2
>libata version 2.21 loaded.
>ata_piix 0000:00:07.1: version 2.12
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
>ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
>ata1.01: ATA-6: WDC WD400BB-00DKA0, 77.07W77, max UDMA/100
>ata1.01: 78165360 sectors, multi 16: LBA48 
>ata1.01: configured for UDMA/33
>ata2.01: ATAPI: TOSHIBA DVD-ROM SD-M1912, TM00, max UDMA/33
>ata2.01: configured for UDMA/33
>scsi 0:0:1:0: Direct-Access     ATA      WDC WD400BB-00DK 77.0 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:1:0: [sda] Write Protect is off
>sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:1:0: [sda] Write Protect is off
>sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:1:0: [sda] Attached SCSI disk
>scsi 1:0:1:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1912 TM00 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1198238004.352:2): selinux=0 auid=4294967295
>sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>sd 0:0:1:0: Attached scsi generic sg0 type 0
>sr 1:0:1:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>3c59x: Donald Becker and others.
>0000:00:0f.0: 3Com PCI 3c905B Cyclone 100baseTx at d8892100.
>input: PC Speaker as /class/input/input3
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
>PCI: setting IRQ 12 as level-triggered
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
>gameport: CS46xx Gameport is pci0000:00:04.0/gameport0, speed 1754kHz
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 786424k swap on /dev/mapper/POOL-myswap.  Priority:-1 extents:1 across:786424k

Actions: View

Attachments on bug 426471: 290276 | 290289 | 290291