Attachment 290277 Details for Bug 367141 – This is my /var/log/dmesg from my last boot from 2.6.23.-12.53

This is my /var/log/dmesg from my last boot from 2.6.23.-12.53

dmesgfile.txt (text/plain), 24.28 KB, created by Gilbert Sebenste on 2007-12-21 21:57:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gilbert Sebenste

Created: 2007-12-21 21:57:21 UTC

Size: 24.28 KB

patch

obsolete

>Linux version 2.6.23.12-53.fc7 (mockbuild@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Wed Dec 19 19:42:55 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfef0000 (usable)
> BIOS-e820: 00000000dfef0000 - 00000000dfef3000 (ACPI NVS)
> BIOS-e820: 00000000dfef3000 - 00000000dff00000 (ACPI data)
> BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
>Warning only 4GB will be used.
>Use a HIGHMEM64G enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5bc0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1048576
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->  1048576
>On node 0 totalpages: 1048576
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 6400 pages used for memmap
>  HighMem zone: 812800 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7640, 0024 (r2 Nvidia)
>ACPI: XSDT DFEF30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP DFEF9740, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: DSDT DFEF3240, 6494 (r1 NVIDIA ASUSACPI     1000 MSFT  3000000)
>ACPI: FACS DFEF0000, 0040
>ACPI: HPET DFEF9980, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG DFEF9A00, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC DFEF9880, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: SSDT DFEFA100, 0304 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
>Processor #3 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at e0000000 (gap: dff00000:10100000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 1040384
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a5000 soft=c0785000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2400.053 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3625952k/4194304k available (2175k kernel code, 41676k reserved, 1113k data, 280k init, 2751424k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073c000 - 0xc0782000   ( 280 kB)
>      .data : 0xc061ff85 - 0xc0736544   (1113 kB)
>      .text : 0xc0400000 - 0xc061ff85   (2175 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>Calibrating delay using timer specific routine.. 4803.15 BogoMIPS (lpj=2401579)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a6000 soft=c0786000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4799.84 BogoMIPS (lpj=2399924)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>SMP alternatives: switching to SMP code
>Booting processor 2/2 eip 3000
>CPU 2 irqstacks, hard=c07a7000 soft=c0787000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4799.90 BogoMIPS (lpj=2399951)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>SMP alternatives: switching to SMP code
>Booting processor 3/3 eip 3000
>CPU 3 irqstacks, hard=c07a8000 soft=c0788000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4799.90 BogoMIPS (lpj=2399953)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>Total of 4 processors activated (19202.81 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:14:04  Date: 12/21/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfbaa0, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 0
>pnp: 00:01: ioport range 0x1000-0x107f has been reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:01: iomem range 0x0-0x0 could not be reserved
>pnp: 00:0c: iomem range 0xf0000000-0xf1ffffff could not be reserved
>pnp: 00:0d: iomem range 0xd3000-0xd3fff has been reserved
>pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:03.0
>  IO window: c000-cfff
>  MEM window: f8000000-fbffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: a000-afff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: fde00000-fdefffff
>PCI: Bridge: 0000:00:06.0
>  IO window: e000-efff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:07.0
>  IO window: d000-dfff
>  MEM window: fd900000-fd9fffff
>  PREFETCH window: fd800000-fd8fffff
>PCI: Bridge: 0000:00:10.0
>  IO window: b000-bfff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: fda00000-fdafffff
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3487k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1198271643.768:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 310728D22F4116F5
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: SSDT DFEF9A80, 0175 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: SSDT DFEF9E90, 00CE (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: SSDT DFEF9F60, 00CE (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: SSDT DFEFA030, 00CE (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfeff0000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:13:248
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 16, io mem 0xfe02f000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 17, io mem 0xfe02e000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_nv 0000:00:0e.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001f800 irq 18
>ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001f808 irq 18
>input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2
>ata1: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7: ST3750640AS, 3.AAK, max UDMA/133
>ata2.00: 1465149168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>scsi 1:0:0:0: Direct-Access     ATA      ST3750640AS      3.AA PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 1:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001f300 irq 19
>ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001f308 irq 19
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: LITE-ON COMBO SHC-52S7K, VK03, max UDMA/100
>ata3.00: configured for UDMA/100
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: CD-ROM            LITE-ON  COMBO SHC-52S7K  VK03 PQ: 0 ANSI: 5
>pata_amd 0000:00:0d.0: version 0.3.9
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fd00 irq 14
>ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fd08 irq 15
>ahci 0000:04:00.0: version 2.3
>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 20
>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>scsi6 : ahci
>ata7: SATA max UDMA/133 cmd 0xf8844100 ctl 0x00000000 bmdma 0x00000000 irq 20
>ata7: SATA link down (SStatus 0 SControl 300)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1198271656.889:2): selinux=0 auid=4294967295
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: PC Speaker as /class/input/input5
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 21
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>firewire_ohci: Added fw-ohci device 0000:05:08.0, OHCI version 1.10
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20
>gameport: EMU10K1 is pci0000:05:07.1/gameport0, io 0xbd00, speed 542kHz
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>e1000: 0000:05:06.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:04:de:f8
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>eth1: forcedeth.c: subsystem: 01043:8221 bound to 0000:00:14.0
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 22
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 20
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:20
>

Actions: View

Attachments on bug 367141: 290277