Attachment 290514 Details for Bug 242766 – dmesg for FC6

dmesg for FC6

dmesg-fc6.txt (text/plain), 16.00 KB, created by Philip on 2007-12-29 03:46:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Philip

Created: 2007-12-29 03:46:25 UTC

Size: 16.00 KB

patch

obsolete

>> BIOS-e820: 0000000017ef0000 - 0000000017f00000 (usable)
><4> BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>383MB LOWMEM available.
><6>found SMP MP-table at 000f7d80
><4>Using x86 segment limits to approximate NX protection
><7>On node 0 totalpages: 98048
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  Normal zone: 93952 pages, LIFO batch:31
><6>DMI 2.3 present.
><6>Using APIC driver default
><7>ACPI: RSDP (v000 COMPAQ                                ) @ 0x000e0010
><7>ACPI: RSDT (v001 COMPAQ CPQ0004  0x20010405  0x00000000) @ 0x000e0080
><7>ACPI: FADT (v001 COMPAQ SOLANO   0x00000001  0x00000000) @ 0x000e0130
><7>ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000d) @ 0x000e136c
><7>ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000d) @ 0x000e14e0
><7>ACPI: MADT (v001 COMPAQ SOLANO   0x00000001  0x00000000) @ 0x000e01a4
><7>ACPI: SSDT (v001 COMPAQ     APIC 0x00000001 MSFT 0x0100000d) @ 0x000e3277
><7>ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000d) @ 0x000e2380
><7>ACPI: SSDT (v001 COMPAQ       S3 0x00000001 MSFT 0x0100000d) @ 0x000e2a8b
><7>ACPI: SSDT (v001 COMPAQ   PIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2c1f
><7>ACPI: SSDT (v001 COMPAQ     GTF0 0x00000001 MSFT 0x0100000d) @ 0x000e2e83
><7>ACPI: SSDT (v001 COMPAQ   SIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2d51
><7>ACPI: SSDT (v001 COMPAQ     GTF2 0x00000001 MSFT 0x0100000d) @ 0x000e307d
><7>ACPI: DSDT (v001 COMPAQ     DSDT 0x00000001 MSFT 0x0100000d) @ 0x00000000
><6>ACPI: PM-Timer IO Port: 0xf808
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><4>Processor #0 6:8 APIC version 17
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 20000000 (gap: 17f00000:e6fa0000)
><4>Detected 731.014 MHz processor.
><4>Built 1 zonelists.  Total pages: 98048
><5>Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz 
><7>mapped APIC to ffffd000 (fee00000)
><7>mapped IOAPIC to ffffc000 (fec00000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>CPU 0 irqstacks, hard=c079f000 soft=c077f000
><4>PID hash table entries: 2048 (order: 11, 8192 bytes)
><4>Console: colour VGA+ 80x25
><4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
><4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
><6>Memory: 377704k/392192k available (2105k kernel code, 13636k reserved, 844k data, 240k init, 0k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 1463.35 BogoMIPS (lpj=2926701)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Initializing.
><6>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
><7>CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
><6>CPU: L1 I cache: 16K, L1 D cache: 16K
><6>CPU: L2 cache: 256K
><7>CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 12k freed
><6>ACPI: Core revision 20060707
><4>CPU0: Intel Pentium III (Coppermine) stepping 06
><6>Total of 1 processors activated (1463.35 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>Brought up 1 CPUs
><7>sizeof(vma)=84 bytes
><7>sizeof(page)=32 bytes
><7>sizeof(inode)=424 bytes
><7>sizeof(dentry)=148 bytes
><7>sizeof(ext3inode)=600 bytes
><7>sizeof(buffer_head)=52 bytes
><7>sizeof(skbuff)=172 bytes
><7>sizeof(task_struct)=1392 bytes
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5802k freed
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xe838d, last bus=2
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11)
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
><7>Boot video device is 0000:00:02.0
><4>PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
><4>PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
><4>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 15 devices
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
><6>pnp: 00:0d: ioport range 0x400-0x41f has been reserved
><6>pnp: 00:0d: ioport range 0x420-0x43f has been reserved
><6>pnp: 00:0d: ioport range 0x440-0x45f has been reserved
><6>pnp: 00:0d: ioport range 0x460-0x47f could not be reserved
><6>pnp: 00:0d: ioport range 0xf800-0xf81f could not be reserved
><6>pnp: 00:0d: ioport range 0xf820-0xf83f could not be reserved
><6>pnp: 00:0d: ioport range 0xf840-0xf85f has been reserved
><6>pnp: 00:0d: ioport range 0xf860-0xf87f has been reserved
><4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 1000-1fff
><6>  MEM window: 40000000-402fffff
><6>  PREFETCH window: disabled.
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
><4>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
><4>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
><6>TCP: Hash tables configured (established 16384 bind 8192)
><6>TCP reno registered
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><5>apm: overridden by ACPI.
><6>audit: initializing netlink socket (disabled)
><5>audit(1198897361.552:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>SELinux:  Registering netfilter hooks
><6>Initializing Cryptographic API
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key EAA0802BFF323905
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>agpgart: Detected an Intel i815 Chipset.
><6>agpgart: detected 4MB dedicated video ram.
><6>agpgart: AGP aperture is 64M @ 0x44000000
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>ICH2: IDE controller at PCI slot 0000:00:1f.1
><6>ICH2: chipset revision 1
><6>ICH2: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:pio
><6>    ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio
><7>Probing IDE interface ide0...
><4>hda: TSSTcorpCD/DVDW SH-W162C, ATAPI CD/DVD-ROM drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>Probing IDE interface ide1...
><4>hdc: WDC WD1200JB-75FUA0, ATA DISK drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><6>hdc: max request size: 512KiB
><6>hdc: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
><6>hdc: cache flushes supported
><6> hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 > hdc4
><4>ide-floppy driver 0.99.newide
><6>usbcore: registered new driver libusual
><6>usbcore: registered new driver hiddev
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>mice: PS/2 mouse device common for all mice
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>TCP bic registered
><6>Initializing IPsec netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Using IPI No-Shortcut mode
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>Freeing unused kernel memory: 240k freed
><4>Write protecting the kernel read-only data: 370k
><6>Time: tsc clocksource has been installed.
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><4>logips2pp: Detected unknown logitech mouse model 89
><5>FS-Cache: Loaded
><4>FS-Cache: netfs 'nfs' registered for caching
><6>loop: loaded (max 8 devices)
><6>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>input: PC Speaker as /class/input/input2
><6>squashfs: version 3.1 (2006/08/09) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>IPv6 over IPv4 tunneling driver
><6>hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp)
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:1f.4 to 64
><6>uhci_hcd 0000:00:1f.4: UHCI Host Controller
><6>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1f.4: irq 169, io base 0x00002440
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
><6>e100: Copyright(c) 1999-2005 Intel Corporation
><6>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 177
><6>e100: eth0: e100_probe: addr 0x40000000, irq 177, MAC addr 00:02:A5:67:5E:32
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><6>security:  3 users, 6 roles, 1560 types, 166 bools, 1 sens, 1024 cats
><6>security:  58 classes, 48173 rules
><6>SELinux:  Completing initialization.
><6>SELinux:  Setting up existing superblocks.
><6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><6>SELinux: initialized (dev hda, type iso9660), uses genfs_contexts
><6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><6>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1198897382.249:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: pIII_sse
><4>   pIII_sse  :  1504.000 MB/sec
><4>raid5: using function: pIII_sse (1504.000 MB/sec)
><4>raid6: int32x1    201 MB/s
><4>raid6: int32x2    229 MB/s
><4>raid6: int32x4    223 MB/s
><4>raid6: int32x8    199 MB/s
><4>raid6: mmxx1      671 MB/s
><4>raid6: mmxx2      739 MB/s
><4>raid6: sse1x1     583 MB/s
><4>raid6: sse1x2     769 MB/s
><4>raid6: using algorithm sse1x2 (769 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Oct 16 2006 15:01:18) installed
><6>Lock_Nolock (built Oct 16 2006 15:02:21) installed
><6>JFS: nTxBlock = 3000, nTxLock = 24006
><6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.4 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1198897392.938:3): audit_pid=577 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hdc1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>SELinux: initialized (dev hdc1, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hdc2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>SELinux: initialized (dev hdc2, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hdc5, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>SELinux: initialized (dev hdc5, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hdc6, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>SELinux: initialized (dev hdc6, type ext3), uses xattr
><4>end_request: I/O error, dev fd0, sector 0
><6>SELinux: initialized (dev fd0, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 242766: 197571 | 197581 | 197591 | 197601 | 216691 | 216701 | 216711 | 216911 | 217781 | 217791 | 236941 | 236951 | 236961 | 290514 | 290515 | 290516 | 290517 | 290518 | 290519 | 290566