Attachment 290894 Details for Bug 397301 – Output of the dmesg command on a Fedora Core 6 system

Output of the dmesg command on a Fedora Core 6 system

fc6_dmesg (text/plain), 31.22 KB, created by Harold Pritchett on 2008-01-05 23:35:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Harold Pritchett

Created: 2008-01-05 23:35:48 UTC

Size: 31.22 KB

patch

obsolete

>Linux version 2.6.22.14-72.fc6 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Wed Nov 21 14:10:25 EST 2007
>Command line: ro root=/dev/VG0/LV00 vga=791
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfef0000 (usable)
> BIOS-e820: 00000000dfef0000 - 00000000dfef3000 (ACPI NVS)
> BIOS-e820: 00000000dfef3000 - 00000000dff00000 (ACPI data)
> BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917232) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
>end_pfn_map = 1179648
>DMI 2.4 present.
>ACPI: RSDP 000F7640, 0024 (r2 Nvidia)
>ACPI: XSDT DFEF30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP DFEF9740, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: DSDT DFEF3240, 6494 (r1 NVIDIA ASUSACPI     1000 MSFT  3000000)
>ACPI: FACS DFEF0000, 0040
>ACPI: HPET DFEF9980, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG DFEF9A00, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC DFEF9880, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000120000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917232) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000120000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1179648
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   917232
>    0:  1048576 ->  1179648
>On node 0 totalpages: 1048207
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1376 pages reserved
>  DMA zone: 2567 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 898856 pages, LIFO batch:31
>  Normal zone: 1792 pages used for memmap
>  Normal zone: 129280 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
>Processor #3
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000dfef0000 - 00000000dfef3000
>swsusp: Registered nosave memory region: 00000000dfef3000 - 00000000dff00000
>swsusp: Registered nosave memory region: 00000000dff00000 - 00000000f0000000
>swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f2000000
>swsusp: Registered nosave memory region: 00000000f2000000 - 00000000fec00000
>swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at e0000000 (gap: dff00000:10100000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 1030703
>Kernel command line: ro root=/dev/VG0/LV00 vga=791
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>time.c: Detected 2399.977 MHz processor.
>Console: colour dummy device 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x4856000 - 0x8856000
>Memory: 4061312k/4718592k available (2507k kernel code, 131516k reserved, 1508k data, 316k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 4803.16 BogoMIPS (lpj=2401581)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 16666487
>Detected 16.666 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4800.00 BogoMIPS (lpj=2400001)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x3
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4800.04 BogoMIPS (lpj=2400023)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 2/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU2: Thermal monitoring enabled (TM1)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x2
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4800.04 BogoMIPS (lpj=2400023)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 3/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU3: Thermal monitoring enabled (TM1)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>pnp: 00:01: ioport range 0x1000-0x107f has been reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:01: iomem range 0x0-0x0 could not be reserved
>pnp: 00:0d: iomem range 0xf0000000-0xf1ffffff could not be reserved
>pnp: 00:0e: iomem range 0xd6000-0xd7fff has been reserved
>pnp: 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:03.0
>  IO window: c000-cfff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: a000-afff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: fde00000-fdefffff
>PCI: Bridge: 0000:00:06.0
>  IO window: e000-efff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:07.0
>  IO window: d000-dfff
>  MEM window: fd900000-fd9fffff
>  PREFETCH window: fd800000-fd8fffff
>PCI: Bridge: 0000:00:10.0
>  IO window: b000-bfff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: fda00000-fdafffff
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2352k freed
>audit: initializing netlink socket (disabled)
>audit(1199573405.642:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key FB81E9CE659BD83B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20001480000, using 3072k, total 131072k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (40 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfeff0000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
>NFORCE-MCP51: chipset revision 161
>NFORCE-MCP51: not 100% native mode: will probe irqs later
>NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
>    ide0: BM-DMA at 0xfd00-0xfd07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xfd08-0xfd0f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: WDC WD1200JB-00GVA0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>hda: max request size: 512KiB
>hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>ide-floppy driver 0.99.newide
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1128k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_nv 0000:00:0e.0: version 3.4
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001f800 irq 21
>ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001f808 irq 21
>usb 2-5: new high speed USB device using ehci_hcd and address 2
>usb 2-5: configuration #1 chosen from 1 choice
>usb 2-6: new high speed USB device using ehci_hcd and address 3
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>usb 2-6: configuration #1 chosen from 1 choice
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001f300 irq 20
>ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001f308 irq 20
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:0:0: [sdd] Attached SCSI disk
>ahci 0000:04:00.0: version 2.2
>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>scsi4 : ahci
>ata5: SATA max UDMA/133 cmd 0xffffc20001430100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
>ata5: SATA link down (SStatus 0 SControl 300)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1199573413.156:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats
>security:  61 classes, 58427 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1199573413.326:3): policy loaded auid=4294967295
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>Initializing USB Mass Storage driver...
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>eth0: forcedeth.c: subsystem: 01043:8221 bound to 0000:00:14.0
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[fdbff000-fdbff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000149ef64]
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdd1 ...
>md:  adding sdd1 ...
>md:  adding sdc1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md0
>md: bind<sda1>
>md: bind<sdb1>
>md: bind<sdc1>
>md: bind<sdd1>
>md: running: <sdd1><sdc1><sdb1><sda1>
>raid5: automatically using best checksumming function: generic_sse
>   generic_sse:  8772.000 MB/sec
>raid5: using function: generic_sse (8772.000 MB/sec)
>raid6: int64x1   2039 MB/s
>raid6: int64x2   2750 MB/s
>raid6: int64x4   2312 MB/s
>raid6: int64x8   1847 MB/s
>raid6: sse2x1    3867 MB/s
>raid6: sse2x2    6074 MB/s
>raid6: sse2x4    7332 MB/s
>raid6: using algorithm sse2x4 (7332 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>raid5: device sdd1 operational as raid disk 1
>raid5: device sdb1 operational as raid disk 2
>raid5: device sda1 operational as raid disk 0
>raid5: allocated 3212kB for md0
>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda1
> disk 1, o:1, dev:sdd1
> disk 2, o:1, dev:sdb1
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-6, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-7, type ext3), uses xattr
>Adding 8385920k swap on /dev/hda2.  Priority:-1 extents:1 across:8385920k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>scsi 5:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  2.17 PQ: 0 ANSI: 2
>scsi 6:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4082B A201 PQ: 0 ANSI: 0
>scsi 6:0:0:0: Attached scsi generic sg4 type 5
>usb-storage: device scan complete
>sd 5:0:0:0: [sde] 4001425 512-byte hardware sectors (2049 MB)
>sd 5:0:0:0: [sde] Write Protect is off
>sd 5:0:0:0: [sde] Mode Sense: 03 00 00 00
>sd 5:0:0:0: [sde] Assuming drive cache: write through
>sd 5:0:0:0: [sde] 4001425 512-byte hardware sectors (2049 MB)
>sd 5:0:0:0: [sde] Write Protect is off
>sd 5:0:0:0: [sde] Mode Sense: 03 00 00 00
>sd 5:0:0:0: [sde] Assuming drive cache: write through
> sde: sde1
>sd 5:0:0:0: [sde] Attached SCSI removable disk
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>usb-storage: device scan complete
>sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>audit(1199573434.340:4): audit_pid=2967 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>Bridge firewalling registered
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>virbr0: no IPv6 routers present
>SELinux: initialized (dev sde1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 397301: 290894 | 290895 | 291512