Attachment 290895 Details for Bug 397301 – Output of the dmesg command on a Fedora 8 system

Output of the dmesg command on a Fedora 8 system

fc8_dmesg (text/plain), 15.09 KB, created by Harold Pritchett on 2008-01-05 23:36:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Harold Pritchett

Created: 2008-01-05 23:36:41 UTC

Size: 15.09 KB

patch

obsolete

>: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (40 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfeff0000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>  Magic number: 8:362:754
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>loop: module loaded
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>input: PC Speaker as /class/input/input2
>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>SCSI subsystem initialized
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfe02e000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 22, io mem 0xfe02f000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>usb 1-5: new high speed USB device using ehci_hcd and address 2
>usb 1-5: configuration #1 chosen from 1 choice
>usb 1-6: new high speed USB device using ehci_hcd and address 3
>usb 1-6: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>usb-storage: device scan complete
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4082B A201 PQ: 0 ANSI: 0
>scsi 0:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  2.17 PQ: 0 ANSI: 2
>sd 0:0:0:0: [sda] 4001425 512-byte hardware sectors (2049 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] 4001425 512-byte hardware sectors (2049 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
>sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI removable disk
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:05:08.0, OHCI version 1.10
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>usbcore: deregistering interface driver usb-storage
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 01043:8221 bound to 0000:00:14.0
>libata version 2.21 loaded.
>sata_nv 0000:00:0e.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001f800 irq 20
>ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001f808 irq 20
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>sd 2:0:0:0: [sda] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 3:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001f300 irq 23
>ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001f308 irq 23
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 4:0:0:0: [sdc] Attached SCSI disk
>scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 5:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sdd] Write Protect is off
>sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sdd] Write Protect is off
>sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 5:0:0:0: [sdd] Attached SCSI disk
>pata_amd 0000:00:0d.0: version 0.3.9
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi6 : pata_amd
>scsi7 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fd00 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fd08 irq 15
>ata5: port is slow to respond, please be patient (Status 0xd0)
>ata5: SRST failed (errno=-16)
>ahci 0000:04:00.0: version 2.3
>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>scsi8 : ahci
>ata7: SATA max UDMA/133 cmd 0xffffc2000144c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
>ata7: SATA link down (SStatus 0 SControl 300)
>Initializing USB Mass Storage driver...
>scsi9 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi10 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>usb-storage: device scan complete
>scsi 10:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4082B A201 PQ: 0 ANSI: 0
>usb 1-5: reset high speed USB device using ehci_hcd and address 2
>scsi 9:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  2.17 PQ: 0 ANSI: 2
>sd 9:0:0:0: [sde] 4001425 512-byte hardware sectors (2049 MB)
>sd 9:0:0:0: [sde] Write Protect is off
>sd 9:0:0:0: [sde] Mode Sense: 03 00 00 00
>sd 9:0:0:0: [sde] Assuming drive cache: write through
>sd 9:0:0:0: [sde] 4001425 512-byte hardware sectors (2049 MB)
>sd 9:0:0:0: [sde] Write Protect is off
>sd 9:0:0:0: [sde] Mode Sense: 03 00 00 00
>sd 9:0:0:0: [sde] Assuming drive cache: write through
> sde: sde1
>sd 9:0:0:0: [sde] Attached SCSI removable disk
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 10:0:0:0: Attached scsi CD-ROM sr0
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>ISOFS: Unable to identify CD-ROM format.
>VFS: Can't find an ext2 filesystem on dev loop0.
>security:  5 users, 11 roles, 2317 types, 112 bools, 1 sens, 1024 cats
>security:  67 classes, 207815 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1199573013.380:2): policy loaded auid=4294967295
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>async_tx: api initialized (async)
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  8772.000 MB/sec
>xor: using function: generic_sse (8772.000 MB/sec)
>raid6: int64x1   2046 MB/s
>raid6: int64x2   2738 MB/s
>raid6: int64x4   2300 MB/s
>raid6: int64x8   1886 MB/s
>raid6: sse2x1    3863 MB/s
>raid6: sse2x2    5117 MB/s
>raid6: sse2x4    7292 MB/s
>raid6: using algorithm sse2x4 (7292 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>GFS2 (built Oct 30 2007 13:19:38) installed
>Lock_Nolock (built Oct 30 2007 13:19:46) installed
>JFS: nTxBlock = 8192, nTxLock = 65536
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>device-mapper: multipath emc: version 0.0.3 loaded
>audit(1199573015.125:3): audit_pid=981 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
>md: md0 stopped.
>md: bind<sdd1>
>md: bind<sdb1>
>md: bind<sdc1>
>md: bind<sda1>
>raid5: device sda1 operational as raid disk 0
>raid5: device sdb1 operational as raid disk 2
>raid5: device sdd1 operational as raid disk 1
>raid5: allocated 3224kB for md0
>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda1
> disk 1, o:1, dev:sdd1
> disk 2, o:1, dev:sdb1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>md: md0 stopped.
>md: unbind<sda1>
>md: export_rdev(sda1)
>md: unbind<sdc1>
>md: export_rdev(sdc1)
>md: unbind<sdb1>
>md: export_rdev(sdb1)
>md: unbind<sdd1>
>md: export_rdev(sdd1)
>SELinux: initialized (dev sde1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 397301: 290894 | 290895 | 291512