Attachment 290905 Details for Bug 427657 – Full dmesg

Full dmesg

dmesg (text/plain), 22.92 KB, created by Pawel Salek on 2008-01-06 11:06:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pawel Salek

Created: 2008-01-06 11:06:17 UTC

Size: 22.92 KB

patch

obsolete

>Linux version 2.6.23.9-85.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Dec 7 15:49:36 EST 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f790000 (usable)
> BIOS-e820: 000000007f790000 - 000000007f79e000 (ACPI data)
> BIOS-e820: 000000007f79e000 - 000000007f7e0000 (ACPI NVS)
> BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 522128) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000FAFE0, 0024 (r2 ACPIAM)
>ACPI: XSDT 7F790100, 005C (r1 _ASUS_ Notebook  8000722 MSFT       97)
>ACPI: FACP 7F790290, 00F4 (r3 MSTEST OEMFACP   8000722 MSFT       97)
>ACPI: DSDT 7F7905C0, 8111 (r1  A0705 A0705000        0 INTL 20060113)
>ACPI: FACS 7F79E000, 0040
>ACPI: APIC 7F790390, 006C (r1 MSTEST OEMAPIC   8000722 MSFT       97)
>ACPI: MCFG 7F790400, 003C (r1 MSTEST OEMMCFG   8000722 MSFT       97)
>ACPI: SLIC 7F790440, 0176 (r1 _ASUS_ Notebook  8000722 MSFT       97)
>ACPI: OEMB 7F79E040, 007B (r1 MSTEST AMI_OEM   8000722 MSFT       97)
>ACPI: HPET 7F7986E0, 0038 (r1 MSTEST OEMHPET   8000722 MSFT       97)
>ACPI: GSCI 7F79E0C0, 2024 (r1 MSTEST GMCHSCI   8000722 MSFT       97)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f790000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 522128) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f790000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   522128
>On node 0 totalpages: 522031
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1317 pages reserved
>  DMA zone: 2626 pages, LIFO batch:0
>  DMA32 zone: 7082 pages used for memmap
>  DMA32 zone: 510950 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a202 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 513576
>Policy zone: DMA32
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>hpet clockevent registered
>TSC calibrated against HPET
>time.c: Detected 2399.950 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2049936k/2088512k available (2442k kernel code, 38188k reserved, 1381k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 4802.48 BogoMIPS (lpj=2401241)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 16666301
>Detected 16.666 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4710.13 BogoMIPS (lpj=2355069)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x2
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4799.86 BogoMIPS (lpj=2399933)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 2/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU2: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x3
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4799.86 BogoMIPS (lpj=2399933)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 3/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU3: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2080 bytes
>Time: 10:45:54  Date: 01/06/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  59, should be 58 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>pnp: 00:07: ioport range 0x290-0x297 has been reserved
>pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
>pnp: 00:08: iomem range 0xff9fa000-0xff9fafff has been reserved
>pnp: 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
>pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0e: iomem range 0xc0000-0xcffff has been reserved
>pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0e: iomem range 0x100000-0x7f7fffff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: bfe00000-bfefffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: a000-afff
>  MEM window: ff600000-ff6fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: ff700000-ff7fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 2
> it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3887k freed
>audit: initializing netlink socket (disabled)
>audit(1199616353.632:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key EFFF415CECD83B98
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7F7A00F0, 01C6 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: SSDT 7F7A02C0, 013A (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: SSDT 7F7A0400, 013A (r1    AMI   CPU3PM        1 INTL 20060113)
>ACPI: SSDT 7F7A0540, 013A (r1    AMI   CPU4PM        1 INTL 20060113)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965G Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>  Magic number: 8:712:779
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff9fb800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000000000001e880 ctl 0x000000000001e802 bmdma 0x000000000001e080 irq 19
>ata2: SATA max UDMA/133 cmd 0x000000000001e480 ctl 0x000000000001e402 bmdma 0x000000000001e088 irq 19
>usb 1-5: new high speed USB device using ehci_hcd and address 4
>ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>usb 1-5: configuration #1 chosen from 1 choice
>hub 1-5:1.0: USB hub found
>hub 1-5:1.0: 4 ports detected
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x000000000001d400 ctl 0x000000000001d082 bmdma 0x000000000001c880 irq 19
>ata4: SATA max UDMA/133 cmd 0x000000000001d000 ctl 0x000000000001cc02 bmdma 0x000000000001c888 irq 19
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>input: NOVATEK USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1
>input: NOVATEK USB Keyboard as /class/input/input2
>input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1
>usb 2-2: new low speed USB device using uhci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>input: A4Tech USB Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.0-2
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1199616371.049:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  8 users, 11 roles, 2359 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 212743 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1199616371.411:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>eth0: RTL8168b/8111b at 0xffffc20000ac8000, 00:1a:92:ef:70:8c, XID 38000000 IRQ 16
>iTCO_vendor_support: vendor-support=0
>input: PC Speaker as /class/input/input4
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:03:02.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>cannot find the slot for index 0 (range 0-0), error: -16
>hda-intel: Error creating card!
>HDA Intel: probe of 0000:00:1b.0 failed with error -12
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>r8169: eth0: link up
>r8169: eth0: link up
>audit(1199616381.213:4): audit_pid=2148 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>w83627ehf: Found W83627DHG chip at 0x290
>w83627ehf w83627ehf.656: Setting VID input voltage to TTL
>coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong!
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0

Actions: View

Attachments on bug 427657: 290905 | 290906