Attachment 290931 Details for Bug 427725 – Dmesg output with pertinent ATA devices and errormessages

Dmesg output with pertinent ATA devices and errormessages

dmesg.txt (text/plain), 6.42 KB, created by Need Real Name on 2008-01-07 04:34:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Need Real Name

Created: 2008-01-07 04:34:26 UTC

Size: 6.42 KB

patch

obsolete

>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_via 0000:00:0f.1: version 0.3.2
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f
>c00 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f
>c08 irq 15
>ata1.00: ATA-7: ST3400620A, 3.AAD, max UDMA/100
>ata1.00: 781422768 sectors, multi 16: LBA48
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: SONY    DVD RW DRU-835A, SS02, max UDMA/66
>ata2.01: ATAPI: PIONEER DVD-RW  DVR-107D, 1.21, max UDMA/33
>ata2.00: limited to UDMA/33 due to 40-wire cable
>ata2.00: configured for UDMA/33
>usb 1-1.3: new high speed USB device using ehci_hcd and address 3
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3400620A       3.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 1-1.3: configuration #1 chosen from 1 choice
>hub 1-1.3:1.0: USB hub found
>hub 1-1.3:1.0: 4 ports detected
> sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            SONY     DVD RW DRU-835A  SS02 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            PIONEER  DVD-RW  DVR-107D 1.21 PQ: 0 ANSI: 5
>usb 1-1.3.3: new full speed USB device using ehci_hcd and address 4
>usb 1-1.3.3: configuration #1 chosen from 1 choice
>sata_via 0000:00:0f.0: version 2.3
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 10
>scsi2 : sata_via
>scsi3 : sata_via
>ata3: SATA max UDMA/133 cmd 0x000000000001d400 ctl 0x000000000001d002 bmdma 0x000000000001c
>000 irq 20
>ata4: SATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001c402 bmdma 0x000000000001c
>008 irq 20
>ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>
>
>------------------------
>
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0
>         res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0
>         res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>ata2: EH complete
>ata2.00: qc timeout (cmd 0xa0)
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.00: qc timeout (cmd 0xa0)
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: limiting speed to UDMA/25:PIO4
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/25
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.00: qc timeout (cmd 0xa0)
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/25
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/25
>ata2: EH complete
>sr1: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/25
>ata2: EH pending after completion, repeating EH (cnt=4)
>ata2: EH complete
>

Actions: View

Attachments on bug 427725: 290931 | 290932 | 290933 | 290934