Attachment 290934 Details for Bug 427725 – Full bootup dmesg output (just in case you need it)

Full bootup dmesg output (just in case you need it)

dmesg (text/plain), 17.18 KB, created by Need Real Name on 2008-01-07 04:40:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Need Real Name

Created: 2008-01-07 04:40:40 UTC

Size: 17.18 KB

patch

obsolete

>Linux version 2.6.23.9-85.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Dec 7 15:49:36 EST 2007
>Command line: ro root=LABEL=/ rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FA810, 0021 (r2 ACPIAM)
>ACPI: XSDT 7FFB0100, 003C (r1 A M I  OEMXSDT   5000729 MSFT       97)
>ACPI: FACP 7FFB0290, 00F4 (r3 A M I  OEMFACP   5000729 MSFT       97)
>ACPI: DSDT 7FFB03F0, 391B (r1  A0277 A0277001        1 MSFT  100000D)
>ACPI: FACS 7FFC0000, 0040
>ACPI: APIC 7FFB0390, 0052 (r1 A M I  OEMAPIC   5000729 MSFT       97)
>ACPI: OEMB 7FFC0040, 003F (r1 A M I  OEMBIOS   5000729 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>CPU has 2 num_cores
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ffb0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007ffb0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524208
>On node 0 totalpages: 524111
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1317 pages reserved
>  DMA zone: 2626 pages, LIFO batch:0
>  DMA32 zone: 7110 pages used for memmap
>  DMA32 zone: 513002 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7f780000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 515628
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2419.767 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>CPU 0: aperture @ dc000000 size 64 MB
>Memory: 2058980k/2096832k available (2442k kernel code, 37464k reserved, 1381k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4842.91 BogoMIPS (lpj=2421456)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 13748699
>Detected 13.748 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4839.36 BogoMIPS (lpj=2419684)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2080 bytes
>Time: 18:32:21  Date: 01/06/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI: enabled onboard AC97/MC97 devices
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  9D, should be 90 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 64M @ 0xdc000000
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 32-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:09: ioport range 0x680-0x6ff has been reserved
>pnp: 00:09: ioport range 0x290-0x297 has been reserved
>pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xdffff has been reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f9f00000-fbffffff
>  PREFETCH window: e0000000-f8ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3248k freed
>audit: initializing netlink socket (disabled)
>audit(1199644341.409:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key EFFF415CECD83B98
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (2 cpu cores) (version 2.00.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>  Magic number: 8:804:543
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>logips2pp: Detected unknown logitech mouse model 62
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9e00000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e800
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_via 0000:00:0f.1: version 0.3.2
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15
>ata1.00: ATA-7: ST3400620A, 3.AAD, max UDMA/100
>ata1.00: 781422768 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: SONY    DVD RW DRU-835A, SS02, max UDMA/66
>ata2.01: ATAPI: PIONEER DVD-RW  DVR-107D, 1.21, max UDMA/33
>ata2.00: limited to UDMA/33 due to 40-wire cable
>ata2.00: configured for UDMA/33
>usb 1-1.3: new high speed USB device using ehci_hcd and address 3
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3400620A       3.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 1-1.3: configuration #1 chosen from 1 choice
>hub 1-1.3:1.0: USB hub found
>hub 1-1.3:1.0: 4 ports detected
> sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            SONY     DVD RW DRU-835A  SS02 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            PIONEER  DVD-RW  DVR-107D 1.21 PQ: 0 ANSI: 5
>usb 1-1.3.3: new full speed USB device using ehci_hcd and address 4
>usb 1-1.3.3: configuration #1 chosen from 1 choice
>sata_via 0000:00:0f.0: version 2.3
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 10
>scsi2 : sata_via
>scsi3 : sata_via
>ata3: SATA max UDMA/133 cmd 0x000000000001d400 ctl 0x000000000001d002 bmdma 0x000000000001c000 irq 20
>ata4: SATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001c402 bmdma 0x000000000001c008 irq 20
>ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1199644354.992:2): selinux=0 auid=4294967295
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18
>3c59x: Donald Becker and others.
>0000:00:0d.0: 3Com PCI 3c905C Tornado at ffffc2000032c000.
>sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>sr 1:0:1:0: Attached scsi generic sg2 type 5
>usbcore: registered new interface driver hci_usb
>gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0xa800, speed 1200kHz
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:00:0e.0, OHCI version 1.0
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>input: PC Speaker as /class/input/input6
>nvidia: module license 'NVIDIA' taints kernel.
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.07  Thu Dec 13 18:34:01 PST 2007
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 4096564k swap on /dev/sda3.  Priority:-1 extents:1 across:4096564k

Actions: View

Attachments on bug 427725: 290931 | 290932 | 290933 | 290934