Attachment 291030 Details for Bug 417671 – dmsg after changing video card from ATI to NV.

dmsg after changing video card from ATI to NV.

homedev.nv.dmesg.log (text/plain), 19.11 KB, created by James Scott Jr. on 2008-01-08 01:45:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James Scott Jr.

Created: 2008-01-08 01:45:55 UTC

Size: 19.11 KB

patch

obsolete

>Linux version 2.6.23.9-85.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Dec 7 15:49:59 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f4b00
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524272) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524272
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524272
>On node 0 totalpages: 524272
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292593 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F6470, 0014 (r0 AMD2P )
>ACPI: RSDT 7FFF3000, 002C (r1 AMD2P  AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FFF3040, 0074 (r1 AMD2P  AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FFF30C0, 33BC (r1 AMD2P  AWRDACPI     1000 MSFT  100000C)
>ACPI: FACS 7FFF0000, 0040
>ACPI: APIC 7FFF6480, 005C (r1 AMD2P  AWRDACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x608
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:8 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:8 APIC version 16
>WARNING: maxcpus limit of 1 reached. Processor ignored.
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 520177
>Kernel command line: ro root=/dev/md0 quiet maxcpus=1
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2000.152 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2071012k/2097088k available (2184k kernel code, 24800k reserved, 1116k data, 280k init, 1179584k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc06222f5 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc06222f5   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4002.89 BogoMIPS (lpj=2001446)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0383f3ff c1cbfbff 00000000 00000420 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) MP 2400+ stepping 01
>Total of 1 processors activated (4002.89 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 22:36:31  Date: 01/07/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb130, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.OP2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPP._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e4000000-e6ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:02:06.0
>  IO window: disabled.
>  MEM window: e8000000-e80fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:10.0
>  IO window: d000-dfff
>  MEM window: e7000000-e8ffffff
>  PREFETCH window: e9000000-e90fffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3114k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1199745390.513:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4BB254D1F8000763
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>BIOS failed to enable PCI standards compliance, fixing this error.
>Boot video device is 0000:01:05.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected AMD 760MP chipset
>agpgart: AGP aperture is 64M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 681 not supported
>Using IPI No-Shortcut mode
>  Magic number: 8:409:653
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>ACPI: PCI Interrupt 0000:03:08.2[C] -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:03:08.2: EHCI Host Controller
>ehci_hcd 0000:03:08.2: new USB bus registered, assigned bus number 1
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ehci_hcd 0000:03:08.2: irq 16, io mem 0xe8005000
>ehci_hcd 0000:03:08.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:02:00.0[D] -> GSI 19 (level, low) -> IRQ 17
>ohci_hcd 0000:02:00.0: OHCI Host Controller
>ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:02:00.0: irq 17, io mem 0xe8100000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:03:08.0: OHCI Host Controller
>ohci_hcd 0000:03:08.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:03:08.0: irq 18, io mem 0xe8007000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 2-3: new low speed USB device using ohci_hcd and address 2
>ACPI: PCI Interrupt 0000:03:08.1[B] -> GSI 19 (level, low) -> IRQ 17
>ohci_hcd 0000:03:08.1: OHCI Host Controller
>ohci_hcd 0000:03:08.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:03:08.1: irq 17, io mem 0xe8004000
>usb 2-3: configuration #1 chosen from 1 choice
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g8 .D USB FW:g8 ] on usb-0000:02:00.0-3
>USB Universal Host Controller Interface driver v3.0
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  5548.000 MB/sec
>xor: using function: pIII_sse (5548.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int32x1    691 MB/s
>raid6: int32x2    843 MB/s
>raid6: int32x4    761 MB/s
>raid6: int32x8    726 MB/s
>raid6: mmxx1     1632 MB/s
>raid6: mmxx2     2859 MB/s
>raid6: sse1x1    1445 MB/s
>raid6: sse1x2    2191 MB/s
>raid6: using algorithm sse1x2 (2191 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_amd 0000:00:07.1: version 0.3.9
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001e000 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001e008 irq 15
>ata1.00: ATA-7: ST3250620A, 3.AAF, max UDMA/100
>ata1.00: 488397168 sectors, multi 16: LBA48 
>ata1.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
>ata1.01: 488397168 sectors, multi 16: LBA48 
>usb 3-2: new full speed USB device using ohci_hcd and address 2
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>usb 3-2: configuration #1 chosen from 1 choice
>ata2.00: ATAPI: LITE-ON DVDRW LDW-451S, GSB6, max UDMA/33
>ata2.01: ATA-7: ST3250820A, 3.AAF, max UDMA/100
>ata2.01: 488397168 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST3250620A       3.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      WDC WD2500JB-00R 20.0 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW LDW-451S   GSB6 PQ: 0 ANSI: 5
>scsi 1:0:1:0: Direct-Access     ATA      ST3250820A       3.AA PQ: 0 ANSI: 5
>sd 1:0:1:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:1:0: [sdc] Write Protect is off
>sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:1:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:1:0: [sdc] Write Protect is off
>sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 1:0:1:0: [sdc] Attached SCSI disk
>md: md0 stopped.
>md: bind<sdb2>
>md: bind<sdc2>
>md: bind<sda2>
>raid5: device sda2 operational as raid disk 0
>raid5: device sdc2 operational as raid disk 2
>raid5: device sdb2 operational as raid disk 1
>raid5: allocated 3170kB for md0
>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda2
> disk 1, o:1, dev:sdb2
> disk 2, o:1, dev:sdc2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1199745398.836:2): selinux=0 auid=4294967295
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sr 1:0:0:0: Attached scsi generic sg2 type 5
>sd 1:0:1:0: Attached scsi generic sg3 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>input: PC Speaker as /class/input/input3
>AMD768 RNG detected
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (FF) as /class/input/input5
>ACPI: Sleep Button (FF) [SLPF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 17 (level, low) -> IRQ 19
>eth0: RTL8110s at 0xf8900000, 00:e0:4c:77:81:5d, XID 04000000 IRQ 19
>gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 59659kHz
>Linux video capture interface: v2.00
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ACPI: PCI Interrupt 0000:03:0c.0[A] -> GSI 18 (level, low) -> IRQ 18
>bttv: driver version 0.9.17 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>bttv0: Bt878 (rev 17) at 0000:02:04.0, irq: 16, latency: 32, mmio: 0xe9000000
>bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003
>bttv0: using: ATI TV-Wonder VE [card=64,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
>bttv0: tuner type=19
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>Bluetooth: HCI USB driver ver 2.9
>firewire_ohci: Added fw-ohci device 0000:03:0c.0, OHCI version 1.10
>usbcore: registered new interface driver hci_usb
>bt878: Unknown symbol bttv_read_gpio
>bt878: Unknown symbol bttv_write_gpio
>bt878: Unknown symbol bttv_gpio_enable
>tuner 1-0060: All bytes are equal. It is not a TEA5767
>tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
>tuner 1-0060: type set to 19 (Temic PAL* auto (4006 FN5))
>tuner 1-0060: type set to 19 (Temic PAL* auto (4006 FN5))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: PLL: 28636363 => 35468950 .. ok
>ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 19
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>intel8x0_measure_ac97_clock: measured 50277 usecs
>intel8x0: clocking to 48000
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on md0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052216k swap on /dev/sdc1.  Priority:-1 extents:1 across:1052216k
>Adding 1052216k swap on /dev/sdb1.  Priority:-2 extents:1 across:1052216k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>r8169: eth0: link up
>r8169: eth0: link up
>audit(1199745412.087:3): audit_pid=1775 old=0 by auid=4294967295
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 19

Actions: View

Attachments on bug 417671: 283611 | 290435 | 290527 | 290567 | 291030