Attachment 291122 Details for Bug 427960 – dmesg result

dmesg result

dmesg.txt (text/plain), 23.71 KB, created by CK on 2008-01-09 08:47:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: CK

Created: 2008-01-09 08:47:03 UTC

Size: 23.71 KB

patch

obsolete

>[root@localhost ~]# dmesg
>Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:05:10 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000f5bb0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131056) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131056
>  HighMem    131056 ->   131056
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   131056
>On node 0 totalpages: 131056
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125969 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F75E0, 0014 (r0 VIA694)
>ACPI: RSDT 1FFF3000, 002C (r1 VIA694 AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 1FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 1FFF30C0, 2B9C (r1 VIA694 AWRDACPI     1000 MSFT  100000C)
>ACPI: FACS 1FFF0000, 0040
>ACPI: APIC 1FFF5C80, 005C (r1 VIA694 AWRDACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:11 APIC version 17
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:11 APIC version 17
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 130033
>Kernel command line: initrd=initrd.img rescue BOOT_IMAGE=vmlinuz 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1130.215 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 508144k/524224k available (2184k kernel code, 15448k reserved, 1117k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc52000 - 0xfffff000   (3764 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622025 - 0xc0739544   (1117 kB)
>      .text : 0xc0400000 - 0xc0622025   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 2261.79 BogoMIPS (lpj=1130896)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2259.92 BogoMIPS (lpj=1129963)
>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
>Total of 2 processors activated (4521.71 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 19:24:31  Date: 01/08/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb170, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent variable MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0xcd800-0xcffff has been reserved
>pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e6000000-e8ffffff
>  PREFETCH window: e4000000-e5ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>Freeing initrd memory: 6432k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1199820270.906:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A8A39A47F4B4A1C
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>PCI: Firmware left 0000:00:08.0 e100 interrupts enabled, disabling
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Thermal Zone [THRM] (39 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected VIA Pro266T chipset
>agpgart: AGP aperture is 64M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 8:957:444
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>loop: module loaded
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>input: PC Speaker as /class/input/input3
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>SCSI subsystem initialized
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:11.2: UHCI Host Controller
>uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:11.2: irq 11, io base 0x0000c000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:11.3: UHCI Host Controller
>uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:11.3: irq 11, io base 0x0000c400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:11.4: UHCI Host Controller
>uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:11.4: irq 11, io base 0x0000c800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>NET: Registered protocol family 23
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
>e100: eth0: e100_probe: addr 0xea120000, irq 16, MAC addr 00:10:DC:23:7D:7C
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 29160 Ultra160 SCSI adapter>
>        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>scsi 0:0:4:0: Sequential-Access BNCHMARK DLT1             3E20 PQ: 0 ANSI: 2
> target0:0:4: Beginning Domain Validation
>libata version 2.21 loaded.
> target0:0:4: wide asynchronous
> target0:0:4: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15)
> target0:0:4: Domain Validation skipping write tests
> target0:0:4: Ending Domain Validation
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 18
>scsi1 : pata_pdc202xx_old
>scsi2 : pata_pdc202xx_old
>ata1: PATA max UDMA/100 cmd 0x0001a400 ctl 0x0001a802 bmdma 0x0001b400 irq 18
>ata2: PATA max UDMA/100 cmd 0x0001ac00 ctl 0x0001b002 bmdma 0x0001b408 irq 18
>ata1.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133
>ata1.00: 398297088 sectors, multi 16: LBA48 
>ata1.01: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133
>ata1.01: 398297088 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>scsi: waiting for bus probes to complete ...
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6Y200P0   YAR4 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 1:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:1:0: Direct-Access     ATA      Maxtor 6Y200P0   YAR4 PQ: 0 ANSI: 5
>sd 1:0:1:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:1:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:1:0: [sdb] Attached SCSI disk
>pata_via 0000:00:11.1: version 0.3.2
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 10
>scsi3 : pata_via
>scsi4 : pata_via
>ata3: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bc00 irq 14
>ata4: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bc08 irq 15
>ata3.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133
>ata3.00: 398297088 sectors, multi 16: LBA48 
>ata3.01: ATA-7: Maxtor 6B200P0, BAH41B10, max UDMA/133
>ata3.01: 398297088 sectors, multi 16: LBA48 
>ata3.00: limited to UDMA/33 due to 40-wire cable
>ata3.01: limited to UDMA/33 due to 40-wire cable
>ata3.00: configured for UDMA/33
>ata3.01: configured for UDMA/33
>ata4.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-106S 0122, E1.22, max UDMA/66
>ata4.00: limited to UDMA/33 due to 40-wire cable
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6Y200P0   YAR4 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 3:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:1:0: Direct-Access     ATA      Maxtor 6B200P0   BAH4 PQ: 0 ANSI: 5
>sd 3:0:1:0: [sdd] 398297088 512-byte hardware sectors (203928 MB)
>sd 3:0:1:0: [sdd] Write Protect is off
>sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:1:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:1:0: [sdd] 398297088 512-byte hardware sectors (203928 MB)
>sd 3:0:1:0: [sdd] Write Protect is off
>sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:1:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2
>sd 3:0:1:0: [sdd] Attached SCSI disk
>scsi 4:0:0:0: CD-ROM            PIONEER  DVD-ROM DVD-106  1.22 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>ISOFS: Unable to identify CD-ROM format.
>VFS: Can't find an ext2 filesystem on dev loop0.
>security:  5 users, 11 roles, 2317 types, 112 bools, 1 sens, 1024 cats
>security:  67 classes, 207815 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1199820554.219:2): policy loaded auid=4294967295
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>async_tx: api initialized (async)
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  2624.000 MB/sec
>xor: using function: pIII_sse (2624.000 MB/sec)
>raid6: int32x1    312 MB/s
>raid6: int32x2    375 MB/s
>raid6: int32x4    359 MB/s
>raid6: int32x8    343 MB/s
>raid6: mmxx1     1011 MB/s
>raid6: mmxx2     1207 MB/s
>raid6: sse1x1     917 MB/s
>raid6: sse1x2    1261 MB/s
>raid6: using algorithm sse1x2 (1261 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>GFS2 (built Oct 30 2007 13:08:29) installed
>Lock_Nolock (built Oct 30 2007 13:08:47) installed
>JFS: nTxBlock = 4024, nTxLock = 32194
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>device-mapper: multipath emc: version 0.0.3 loaded
>st: Version 20070203, fixed bufsize 32768, s/g segs 256
>st 0:0:4:0: Attached scsi tape st0
>st 0:0:4:0: st0: try direct i/o: yes (alignment 512 B)
>audit(1199820560.221:3): audit_pid=700 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
>md: md1 stopped.
>md: bind<sdb2>
>md: bind<sdc2>
>md: bind<sdd2>
>md: bind<sda2>
>raid5: device sda2 operational as raid disk 0
>raid5: device sdd2 operational as raid disk 3
>raid5: device sdc2 operational as raid disk 2
>raid5: device sdb2 operational as raid disk 1
>raid5: allocated 4211kB for md1
>raid5: raid level 6 set md1 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda2
> disk 1, o:1, dev:sdb2
> disk 2, o:1, dev:sdc2
> disk 3, o:1, dev:sdd2
>md: md0 stopped.
>md: bind<sdb1>
>md: bind<sdd1>
>md: bind<sdc1>
>md: bind<sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>md: md1 stopped.
>md: unbind<sda2>
>md: export_rdev(sda2)
>md: unbind<sdd2>
>md: export_rdev(sdd2)
>md: unbind<sdc2>
>md: export_rdev(sdc2)
>md: unbind<sdb2>
>md: export_rdev(sdb2)
>md: md0 stopped.
>md: unbind<sda1>
>md: export_rdev(sda1)
>md: unbind<sdc1>
>md: export_rdev(sdc1)
>md: unbind<sdd1>
>md: export_rdev(sdd1)
>md: unbind<sdb1>
>md: export_rdev(sdb1)
>md: md1 stopped.
>md: bind<sdb2>
>md: bind<sdc2>
>md: bind<sdd2>
>md: bind<sda2>
>raid5: device sda2 operational as raid disk 0
>raid5: device sdd2 operational as raid disk 3
>raid5: device sdc2 operational as raid disk 2
>raid5: device sdb2 operational as raid disk 1
>raid5: allocated 4211kB for md1
>raid5: raid level 6 set md1 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda2
> disk 1, o:1, dev:sdb2
> disk 2, o:1, dev:sdc2
> disk 3, o:1, dev:sdd2
>md: md0 stopped.
>md: bind<sdb1>
>md: bind<sdd1>
>md: bind<sdc1>
>md: bind<sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>

Actions: View

Attachments on bug 427960: 291083 | 291122