Attachment 291299 Details for Bug 428281 – dmesg output

dmesg output

dmesg.txt (text/plain), 28.47 KB, created by David Gesswein on 2008-01-10 17:14:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Gesswein

Created: 2008-01-10 17:14:55 UTC

Size: 28.47 KB

patch

obsolete

>Linux version 2.6.23.12-52.fc7 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Tue Dec 18 21:18:02 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
> BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
> BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>126MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f36c0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 261856) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   261856
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   261856
>On node 0 totalpages: 261856
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 253 pages used for memmap
>  HighMem zone: 32227 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F75B0, 0014 (r0 Nvidia)
>ACPI: RSDT 3FEE3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FEE3180, 6472 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3FEE0000, 0040
>ACPI: SSDT 3FEE9700, 00F7 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: MCFG 3FEE9840, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 3FEE9640, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 259811
>Kernel command line: ro root=/dev/VG1B/OS1 quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a5000 soft=c0785000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2210.203 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1029744k/1047424k available (2175k kernel code, 16944k reserved, 1113k data, 280k init, 129920k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073c000 - 0xc0782000   ( 280 kB)
>      .data : 0xc061ff85 - 0xc0736544   (1113 kB)
>      .text : 0xc0400000 - 0xc061ff85   (2175 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4421.77 BogoMIPS (lpj=2210887)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 078bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 02
>Total of 1 processors activated (4421.77 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  1:53:02  Date: 01/10/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfa880, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:09.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:01: ioport range 0x1000-0x107f has been reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:01: iomem range 0x0-0x0 could not be reserved
>pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0d: iomem range 0xd1800-0xd3fff has been reserved
>pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: a000-afff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: c8000000-dfffffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: 9000-9fff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdd00000-fddfffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: 8000-8fff
>  MEM window: fdc00000-fdcfffff
>  PREFETCH window: fdb00000-fdbfffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: 7000-7fff
>  MEM window: fda00000-fdafffff
>  PREFETCH window: fd900000-fd9fffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: 6000-6fff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: b0000000-bfffffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3486k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1199929982.479:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 35DAFEBDB3A62F88
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>Boot video device is 0000:01:06.0
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (1 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x8
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI No-Shortcut mode
>  Magic number: 8:161:862
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
>uhci_hcd 0000:01:08.0: UHCI Host Controller
>uhci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:01:08.0: irq 16, io base 0x0000a800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:08.1[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 17
>uhci_hcd 0000:01:08.1: UHCI Host Controller
>uhci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:01:08.1: irq 17, io base 0x0000a400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.0: irq 18, io mem 0xfe02f000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 19, io mem 0xfe02e000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:08.2[C] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20
>ehci_hcd 0000:01:08.2: EHCI Host Controller
>ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:01:08.2: irq 20, io mem 0xfdfff000
>ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 4 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_amd 0000:00:06.0: version 0.3.9
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001e000 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001e008 irq 15
>ata1.00: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
>ata1.00: 488397168 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: ATAPI   DVD A  DH20A3P, XP5Z, max UDMA/66
>ata2.00: limited to UDMA/33 due to 40-wire cable
>usb 4-3: new high speed USB device using ehci_hcd and address 3
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JB-00R 20.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            ATAPI    DVD A  DH20A3P   XP5Z PQ: 0 ANSI: 5
>usb 4-3: configuration #1 chosen from 1 choice
>usb 3-2: new full speed USB device using ohci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>usb 3-4: new full speed USB device using ohci_hcd and address 3
>usb 3-4: configuration #1 chosen from 1 choice
>input: C-Media USB Headphone Set   as /class/input/input3
>input: USB HID v1.00 Device [C-Media USB Headphone Set  ] on usb-0000:00:02.0-4
>sata_nv 0000:00:07.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:07.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xf883e480 ctl 0xf883e4a0 bmdma 0x0001cc00 irq 21
>ata4: SATA max UDMA/133 cmd 0xf883e580 ctl 0xf883e5a0 bmdma 0x0001cc08 irq 21
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
>ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
>ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 2:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 22
>sata_nv 0000:00:08.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0xf8888480 ctl 0xf88884a0 bmdma 0x0001b800 irq 22
>ata6: SATA max UDMA/133 cmd 0xf8888580 ctl 0xf88885a0 bmdma 0x0001b808 irq 22
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1199929991.987:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
>pl2303 3-2:1.0: pl2303 converter detected
>usb 3-2: pl2303 converter now attached to ttyUSB0
>usbcore: registered new interface driver pl2303
>drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>usbcore: registered new interface driver snd-usb-audio
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>forcedeth: using HIGHDMA
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>input: PC Speaker as /class/input/input6
>Linux video capture interface: v2.00
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>eth0: forcedeth.c: subsystem: 01019:1b51 bound to 0000:00:0a.0
>ACPI: PCI Interrupt 0000:01:08.3[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fdffe000-fdffe7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ivtv:  Start initialization, version 1.0.0
>ivtv0: Initializing card #0
>ivtv0: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 23
>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>nvidia: module license 'NVIDIA' taints kernel.
>ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
>intel8x0_measure_ac97_clock: measured 53835 usecs
>intel8x0: clocking to 46841
>ivtv0: Encoder revision: 0x02060039
>tveeprom 2-0050: Hauppauge model 26052, rev C185, serial# 2882829
>tveeprom 2-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
>tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 2-0050: audio processor is CX25843 (idx 37)
>tveeprom 2-0050: decoder processor is CX25843 (idx 30)
>tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
>ivtv0: Autodetected Hauppauge WinTV PVR-150
>ivtv0: Reopen i2c bus for IR-blaster support
>tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>IEEE 1394 device has ROM CRC error
>ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0814436100001d22]
>ieee1394: Host added: ID:BUS[0-01:1023]  GUID[0330508140100056]
>IEEE 1394 device has ROM CRC error
>IEEE 1394 device has ROM CRC error
>IEEE 1394 device has ROM CRC error
>IEEE 1394 device has ROM CRC error
>cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>video1394: Installed video1394 module
>ieee1394: raw1394: /dev/raw1394 device initialized
>usb-storage: device scan complete
>scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
>scsi 6:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
>scsi 6:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
>scsi 6:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
>sd 6:0:0:0: [sdc] Attached SCSI removable disk
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>sd 6:0:0:1: [sdd] Attached SCSI removable disk
>sd 6:0:0:1: Attached scsi generic sg4 type 0
>sd 6:0:0:2: [sde] Attached SCSI removable disk
>sd 6:0:0:2: Attached scsi generic sg5 type 0
>sd 6:0:0:3: [sdf] Attached SCSI removable disk
>sd 6:0:0:3: Attached scsi generic sg6 type 0
>cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
>wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
>tuner 2-0061: type set to 50 (TCL 2002N)
>ivtv0: Registered device video0 for encoder MPEG (4 MB)
>ivtv0: Registered device video32 for encoder YUV (2 MB)
>ivtv0: Registered device vbi0 for encoder VBI (1 MB)
>ivtv0: Registered device video24 for encoder PCM audio (1 MB)
>ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
>PCI: Enabling device 0000:05:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  169.07  Thu Dec 13 18:42:56 PST 2007
>ivtv:  End initialization
>lirc_dev: IR Remote Control driver registered, major 61 
>lirc_serial: Manually using active low receiver
>lirc_dev: lirc_register_plugin: sample_rate: 0
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>fuse distribution version: 2.7.2
>Adding 1959920k swap on /dev/sdb2.  Priority:-1 extents:1 across:1959920k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Marking TSC unstable due to: cpufreq changes.
>Time: acpi_pm clocksource has been installed.
>Clocksource tsc unstable (delta = -90647889 ns)
>audit(1199930014.201:3): audit_pid=2178 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>it87: Found IT8712F chip at 0x290, revision 7
>it87: in3 is VCC (+5V)
>it87: in7 is VCCH (+5V Stand-By)
>it87 it87.656: Reconfiguring PWM to active high polarity
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20
>lirc_serial: ignoring spike: 1 1 47858720 47858720 3c779 db3d
>lirc_serial: ignoring spike: 1 1 47858720 47858720 ef924 e5204

Actions: View

Attachments on bug 428281: 291299 | 301428