Attachment 291417 Details for Bug 428468 – dmesg showing IDE errors on 2.6.18-53.1.4.el5xen

dmesg showing IDE errors on 2.6.18-53.1.4.el5xen

8832-errors-2.txt (text/plain), 14.83 KB, created by Bryn M. Reeves on 2008-01-11 20:29:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bryn M. Reeves

Created: 2008-01-11 20:29:21 UTC

Size: 14.83 KB

patch

obsolete

>Linux version 2.6.18-53.1.4.el5xen (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Nov 14 11:05:57 EST 2007
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 00000000f5d2d000 (usable)
>3205MB HIGHMEM available.
>727MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 1006893
>  DMA zone: 186366 pages, LIFO batch:31
>  HighMem zone: 820527 pages, LIFO batch:31
>DMI 2.3 present.
>ACPI: RSDP (v000 IBM                                   ) @ 0x000fdfc0
>ACPI: RSDT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0xf7feff80
>ACPI: FADT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0xf7feff00
>ACPI: MADT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0xf7fefe80
>ACPI: DSDT (v001 IBM    SERBLADE 0x00001000 INTL 0x02002025) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
>ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16])
>IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31
>ACPI: IOAPIC (id[0x0c] address[0xfec02000] gsi_base[32])
>IOAPIC[2]: apic_id 12, version 17, address 0xfec02000, GSI 32-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ4 used by override.
>Enabling APIC mode:  Flat.  Using 3 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Built 1 zonelists.  Total pages: 1006893
>Kernel command line: ro root=/dev/rootvg/rootvol pci=bfsort
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0727000 soft=c0707000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Xen reported: 2799.282 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Kernel range: 0x00000000c341e000 - 0x00000000c741e000
>vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
>Memory: 3904652k/4027572k available (2049k kernel code, 113672k reserved, 844k data, 168k init, 3282108k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 7003.23 BogoMIPS (lpj=14006460)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebd3f1 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebd3f1 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: bfebd3f1 00000000 00000000 00000080 00004400 00000000 00000000
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU 1 irqstacks, hard=c0728000 soft=c0708000
>ENABLING IO-APIC IRQs
>SMP alternatives: switching to SMP code
>Brought up 2 CPUs
>Initializing CPU#1
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=331
>checking if image is initramfs... it is
>Freeing initrd memory: 5958k freed
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>Allocating PCI resources starting at f8800000 (gap: f8000000:06c00000)
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:01.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Root Bridge [PCI1] (0000:02)
>PCI: Probing PCI hardware (bus 02)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
>ACPI: PCI Root Bridge [PCI2] (0000:01)
>PCI: Probing PCI hardware (bus 01)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
>ACPI: PCI Interrupt Link [LPUS] (IRQs *7)
>ACPI: PCI Interrupt Link [LPID] (IRQs *11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x510-0x517 could not be reserved
>pnp: 00:01: ioport range 0x504-0x507 could not be reserved
>pnp: 00:01: ioport range 0x500-0x503 could not be reserved
>pnp: 00:01: ioport range 0x420-0x427 has been reserved
>pnp: 00:01: ioport range 0x460-0x461 has been reserved
>pnp: 00:07: ioport range 0x1ec-0x1ef has been reserved
>pnp: 00:07: ioport range 0x400-0x4fe could not be reserved
>pnp: 00:07: ioport range 0x600-0x600 has been reserved
>pnp: 00:07: ioport range 0x800-0x80f has been reserved
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1199700707.632:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key B6BB063468FBFC28
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x1
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SvrWks CSB6: IDE controller at PCI slot 0000:00:0f.1
>ACPI: PCI Interrupt Link [LPID] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [LPID] -> GSI 11 (level, low) -> IRQ 11
>SvrWks CSB6: chipset revision 176
>SvrWks CSB6: 100% native mode on irq 11
>    ide0: BM-DMA at 0x0710-0x0717, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x0718-0x071f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: TOSHIBA MK4026GAXB, ATA DISK drive
>ide0 at 0x730-0x737,0x726 on irq 11
>Probing IDE interface ide1...
>hdc: TOSHIBA MK4026GAXB, ATA DISK drive
>ide1 at 0x728-0x72f,0x722 on irq 11
>hda: max request size: 128KiB
>hda: 78140160 sectors (40007 MB), CHS=65535/16/63
>hda: cache flushes supported
> hda: hda1 hda2
>hdc: max request size: 128KiB
>hdc: 78140160 sectors (40007 MB), CHS=65535/16/63
>hdc: cache flushes supported
> hdc: hdc1 hdc2
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 168k freed
>Write protecting the kernel read-only data: 360k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 7
>ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LPUS] -> GSI 7 (level, low) -> IRQ 7
>ohci_hcd 0000:00:0f.2: OHCI Host Controller
>ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0f.2: irq 7, io mem 0xfebfe000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb 1-2: new full speed USB device using ohci_hcd and address 2
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>usb 1-2: configuration #1 chosen from 1 choice
>input: IBM IBM MM2 as /class/input/input0
>input: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:00:0f.2-2
>input: IBM IBM MM2 as /class/input/input1
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:00:0f.2-2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1199700712.172:2): selinux=0 auid=4294967295
>piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
>tg3.c:v3.80-rh (August 2, 2007)
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>eth0: Tigon3 [partno(BCM95704A41) rev 2002 PHY(serdes)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:09:6b:b5:49:c0
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>eth1: Tigon3 [partno(BCM95704A41) rev 2002 PHY(serdes)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:09:6b:b5:49:c1
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
>eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
>input: PC Speaker as /class/input/input2
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on dm-3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 524280k swap on /dev/rootvg/swapvol.  Priority:-1 extents:1 across:524280k
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>Bridge firewalling registered
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
>device vif0.0 entered promiscuous mode
>audit(1199700769.563:3): dev=vif0.0 prom=256 old_prom=0 auid=4294967295
>xenbr0: port 1(vif0.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 1(vif0.0) entering forwarding state
>tg3: peth0: Link is up at 1000 Mbps, full duplex.
>tg3: peth0: Flow control is off for TX and off for RX.
>device peth0 entered promiscuous mode
>audit(1199700770.863:4): dev=peth0 prom=256 old_prom=0 auid=4294967295
>xenbr0: port 2(peth0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 2(peth0) entering forwarding state
>hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: CHECK for good STATUS
>hdc: dma_timer_expiry: dma status == 0x20
>hdc: DMA timeout retry
>hdc: timeout waiting for DMA
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>ide1: reset: success
>hdc: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: dma_timer_expiry: dma status == 0x00
>hdc: DMA timeout retry
>hdc: timeout waiting for DMA
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>ide1: reset: success
>FS-Cache: Loaded
>FS-Cache: netfs 'nfs' registered for caching
>hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: CHECK for good STATUS
>hdc: dma_timer_expiry: dma status == 0x20
>hdc: DMA timeout retry
>hdc: timeout waiting for DMA
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>ide1: reset: success
>hdc: dma_timer_expiry: dma status == 0x20
>hdc: DMA timeout retry
>hdc: timeout waiting for DMA
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>ide1: reset: success
>hdc: task_out_intr: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdc: CHECK for good STATUS

Actions: View

Attachments on bug 428468: 291417 | 291464 | 291516 | 291517 | 291518