Attachment 291512 Details for Bug 397301 – Output of the dmesg command on a RHEL 5 system

Output of the dmesg command on a RHEL 5 system

rhel5.dmesg (text/plain), 16.00 KB, created by Harold Pritchett on 2008-01-13 20:04:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Harold Pritchett

Created: 2008-01-13 20:04:20 UTC

Size: 16.00 KB

patch

obsolete

>ler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:03.0 to 64
><4>pcie_portdrv_probe->Dev[03b7:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:03.0:pcie00]
><7>Allocate Port Service[0000:00:03.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:05.0 to 64
><4>pcie_portdrv_probe->Dev[03b8:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:05.0:pcie00]
><7>Allocate Port Service[0000:00:05.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:06.0 to 64
><4>pcie_portdrv_probe->Dev[03b9:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:06.0:pcie00]
><7>Allocate Port Service[0000:00:06.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:07.0 to 64
><4>pcie_portdrv_probe->Dev[03bb:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:07.0:pcie00]
><7>Allocate Port Service[0000:00:07.0:pcie03]
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>ACPI: Fan [FAN] (on)
><6>ACPI: Thermal Zone [THRM] (40 C)
><6>Real Time Clock Driver v1.12ac
><7>hpet_resources: 0xfeff0000 is busy
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
><6>NFORCE-MCP51: chipset revision 161
><6>NFORCE-MCP51: not 100% native mode: will probe irqs later
><6>NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
><6>    ide0: BM-DMA at 0xfd00-0xfd07, BIOS settings: hda:DMA, hdb:DMA
><6>    ide1: BM-DMA at 0xfd08-0xfd0f, BIOS settings: hdc:DMA, hdd:DMA
><7>Probing IDE interface ide0...
><4>hda: WDC WD1200JB-00GVA0, ATA DISK drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>Probing IDE interface ide1...
><7>Probing IDE interface ide1...
><6>hda: max request size: 512KiB
><6>hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
><6>hda: cache flushes supported
><6> hda: hda1 hda2 hda3
><4>ide-floppy driver 0.99.newide
><6>usbcore: registered new driver hiddev
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>mice: PS/2 mouse device common for all mice
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>TCP bic registered
><6>Initializing IPsec netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Using IPI No-Shortcut mode
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>Time: tsc clocksource has been installed.
><6>Freeing unused kernel memory: 232k freed
><4>Write protecting the kernel read-only data: 383k
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><4>logips2pp: Detected unknown logitech mouse model 1
><5>FS-Cache: Loaded
><4>FS-Cache: netfs 'nfs' registered for caching
><6>loop: loaded (max 8 devices)
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
><6>input: PC Speaker as /class/input/input1
><6>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
><6>squashfs: version 3.2-alpha (2006/12/12) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>IPv6 over IPv4 tunneling driver
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp)
><4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 209
><7>PCI: Setting latency timer of device 0000:00:0b.1 to 64
><6>ehci_hcd 0000:00:0b.1: EHCI Host Controller
><6>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:0b.1: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:0b.1
><6>ehci_hcd 0000:00:0b.1: irq 209, io mem 0xfe02e000
><6>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 8 ports detected
><7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
><4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 217
><7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
><6>ohci_hcd 0000:00:0b.0: OHCI Host Controller
><6>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:0b.0: irq 217, io mem 0xfe02f000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 8 ports detected
><6>usb 1-5: new high speed USB device using ehci_hcd and address 2
><6>usb 1-5: configuration #1 chosen from 1 choice
><6>usb 1-6: new high speed USB device using ehci_hcd and address 3
><6>usb 1-6: configuration #1 chosen from 1 choice
><6>Initializing USB Mass Storage driver...
><6>scsi0 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>scsi1 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 3
><6>usbcore: registered new driver usb-storage
><7>usb-storage: waiting for device to settle before scanning
><6>USB Mass Storage support registered.
><5>  Vendor: SanDisk   Model: U3 Cruzer Micro   Rev: 2.17
><5>  Type:   Direct-Access                      ANSI SCSI revision: 02
><5>  Vendor: HL-DT-ST  Model: DVDRAM GSA-4082B  Rev: A201
><5>  Type:   CD-ROM                             ANSI SCSI revision: 00
><5>SCSI device sda: 4001425 512-byte hdwr sectors (2049 MB)
><4>sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><7>usb-storage: device scan complete
><5>sda: Write Protect is off
><7>sda: Mode Sense: 03 00 00 00
><3>sda: assuming drive cache: write through
><5>SCSI device sda: 4001425 512-byte hdwr sectors (2049 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 03 00 00 00
><3>sda: assuming drive cache: write through
><6> sda: sda1
><5>sd 0:0:0:0: Attached scsi removable disk sda
><5>  Vendor: SanDisk   Model: U3 Cruzer Micro   Rev: 2.17
><5>  Type:   CD-ROM                             ANSI SCSI revision: 02
><4>sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
><7>sr 0:0:0:1: Attached scsi CD-ROM sr1
><7>usb-storage: device scan complete
><6>usbcore: deregistering driver usb-storage
><6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
><4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
><6>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 225
><7>PCI: Setting latency timer of device 0000:00:14.0 to 64
><6>forcedeth: using HIGHDMA
><6>eth0: forcedeth.c: subsystem: 01043:8221 bound to 0000:00:14.0
><7>libata version 2.00 loaded.
><7>sata_nv 0000:00:0e.0: version 2.0
><4>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
><6>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 233
><7>PCI: Setting latency timer of device 0000:00:0e.0 to 64
><6>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF800 irq 233
><6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF808 irq 233
><6>scsi2 : sata_nv
><6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata1.00: ATA-8, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32)
><6>ata1.00: ata1: dev 0 multi count 1
><6>ata1.00: configured for UDMA/133
><6>scsi3 : sata_nv
><6>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata2.00: ATA-8, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32)
><6>ata2.00: ata2: dev 0 multi count 1
><6>ata2.00: configured for UDMA/133
><5>  Vendor: ATA       Model: WDC WD5000AAKS-0  Rev: 12.0
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><6> sda: sda1
><5>sd 2:0:0:0: Attached scsi disk sda
><5>  Vendor: ATA       Model: WDC WD5000AAKS-0  Rev: 12.0
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><5>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><6> sdb: sdb1
><5>sd 3:0:0:0: Attached scsi disk sdb
><4>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 209
><7>PCI: Setting latency timer of device 0000:00:0f.0 to 64
><6>ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF300 irq 209
><6>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF308 irq 209
><6>scsi4 : sata_nv
><6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata3.00: ATA-8, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32)
><6>ata3.00: ata3: dev 0 multi count 1
><6>ata3.00: configured for UDMA/133
><6>scsi5 : sata_nv
><6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata4.00: ATA-8, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32)
><6>ata4.00: ata4: dev 0 multi count 1
><6>ata4.00: configured for UDMA/133
><5>  Vendor: ATA       Model: WDC WD5000AAKS-0  Rev: 12.0
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
><5>sdc: Write Protect is off
><7>sdc: Mode Sense: 00 3a 00 00
><5>SCSI device sdc: drive cache: write back
><5>SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
><5>sdc: Write Protect is off
><7>sdc: Mode Sense: 00 3a 00 00
><5>SCSI device sdc: drive cache: write back
><6> sdc: sdc1
><5>sd 4:0:0:0: Attached scsi disk sdc
><5>  Vendor: ATA       Model: WDC WD5000AAKS-0  Rev: 12.0
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
><5>sdd: Write Protect is off
><7>sdd: Mode Sense: 00 3a 00 00
><5>SCSI device sdd: drive cache: write back
><5>SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
><5>sdd: Write Protect is off
><7>sdd: Mode Sense: 00 3a 00 00
><5>SCSI device sdd: drive cache: write back
><6> sdd: sdd1
><5>sd 5:0:0:0: Attached scsi disk sdd
><7>ahci 0000:04:00.0: version 2.0
><4>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
><6>ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 50
><7>PCI: Setting latency timer of device 0000:04:00.0 to 64
><6>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
><6>ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
><6>ata5: SATA max UDMA/133 cmd 0xF8948100 ctl 0x0 bmdma 0x0 irq 50
><6>scsi6 : ahci
><6>ata5: SATA link down (SStatus 0 SControl 300)
><6>Initializing USB Mass Storage driver...
><6>scsi7 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>scsi8 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 3
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><5>  Vendor: HL-DT-ST  Model: DVDRAM GSA-4082B  Rev: A201
><5>  Type:   CD-ROM                             ANSI SCSI revision: 00
><5>  Vendor: SanDisk   Model: U3 Cruzer Micro   Rev: 2.17
><5>  Type:   Direct-Access                      ANSI SCSI revision: 02
><4>sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
><7>sr 8:0:0:0: Attached scsi CD-ROM sr0
><7>usb-storage: device scan complete
><5>SCSI device sde: 4001425 512-byte hdwr sectors (2049 MB)
><5>sde: Write Protect is off
><7>sde: Mode Sense: 03 00 00 00
><3>sde: assuming drive cache: write through
><5>SCSI device sde: 4001425 512-byte hdwr sectors (2049 MB)
><5>sde: Write Protect is off
><7>sde: Mode Sense: 03 00 00 00
><3>sde: assuming drive cache: write through
><6> sde: sde1
><5>sd 7:0:0:0: Attached scsi removable disk sde
><5>  Vendor: SanDisk   Model: U3 Cruzer Micro   Rev: 2.17
><5>  Type:   CD-ROM                             ANSI SCSI revision: 02
><4>sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
><7>sr 7:0:0:1: Attached scsi CD-ROM sr1
><7>usb-storage: device scan complete
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><6>security:  3 users, 6 roles, 1587 types, 172 bools, 1 sens, 1024 cats
><6>security:  59 classes, 49762 rules
><6>SELinux:  Completing initialization.
><6>SELinux:  Setting up existing superblocks.
><6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><6>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1200251903.337:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: pIII_sse
><4>   pIII_sse  :  8888.000 MB/sec
><4>raid5: using function: pIII_sse (8888.000 MB/sec)
><4>raid6: int32x1    898 MB/s
><4>raid6: int32x2    929 MB/s
><4>raid6: int32x4    835 MB/s
><4>raid6: int32x8    804 MB/s
><4>raid6: mmxx1     3105 MB/s
><4>raid6: mmxx2     3195 MB/s
><4>raid6: sse1x1    2066 MB/s
><4>raid6: sse1x2    2589 MB/s
><4>raid6: sse2x1    3808 MB/s
><4>raid6: sse2x2    4082 MB/s
><4>raid6: using algorithm sse2x2 (4082 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Jan 26 2007 14:16:08) installed
><6>Lock_Nolock (built Jan 26 2007 14:16:16) installed
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1200251904.833:3): audit_pid=999 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0

Actions: View

Attachments on bug 397301: 290894 | 290895 | 291512