Attachment 291520 Details for Bug 137183 – lspci of this ati chipset machine

lspci of this ati chipset machine

lspci-verbose.txt (text/plain), 10.06 KB, created by François Kooman on 2008-01-13 23:26:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: François Kooman

Created: 2008-01-13 23:26:09 UTC

Size: 10.06 KB

patch

obsolete

>00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge (rev 02)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 8107
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>	Region 1: Memory at f7f00000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [a0] AGP version 3.0
>		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
>	Kernel driver in use: agpgart-ati
>
>00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: fd900000-fdcfffff
>	Prefetchable memory behind bridge: e7e00000-f7dfffff
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 8108
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 128 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at fe900000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 8108
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 128 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at fea00000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev 01) (prog-if 20 [EHCI])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 8108
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 128 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>		Bridge: PM- B3+
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:14.0 SMBus: ATI Technologies Inc SMBus (rev 18)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 8108
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Region 0: I/O ports at 0a00 [size=16]
>	Region 1: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
>	Kernel driver in use: piix4_smbus
>	Kernel modules: i2c-piix4
>
>00:14.1 IDE interface: ATI Technologies Inc Dual Channel Bus Master PCI IDE Controller (prog-if 8a [Master SecP PriP])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 8108
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Interrupt: pin A routed to IRQ 16
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at ff00 [size=16]
>	Kernel driver in use: pata_atiixp
>	Kernel modules: pata_atiixp
>
>00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c
>	Subsystem: ASUSTeK Computer Inc. Unknown device 8108
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342 (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fdd00000-fe2fffff
>	Prefetchable memory behind bridge: fff00000-000fffff
>	Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller
>	Subsystem: ASUSTeK Computer Inc. Unknown device 810d
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (500ns min), Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 19
>	Region 0: Memory at fe800000 (32-bit, non-prefetchable) [size=256]
>	Kernel driver in use: ATI IXP AC97 controller
>	Kernel modules: snd-atiixp
>
>01:05.0 VGA compatible controller: ATI Technologies Inc Radeon 9100 IGP (prog-if 00 [VGA])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 8107
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (2000ns min), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
>	Region 1: I/O ports at d000 [size=256]
>	Region 2: Memory at fdc00000 (32-bit, non-prefetchable) [size=64K]
>	Expansion ROM at fdb00000 [disabled] [size=128K]
>	Capabilities: [58] AGP version 3.0
>		Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit+ FW+ AGP3+ Rate=x4,x8
>		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel modules: radeonfb
>
>02:08.0 Ethernet controller: 3Com Corporation 3Com 3C920B-EMB-WNM Integrated Fast Ethernet Controller (rev 40)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 8108
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: I/O ports at ec00 [size=128]
>	Region 1: Memory at fe200000 (32-bit, non-prefetchable) [size=128]
>	Expansion ROM at fdd00000 [disabled] [size=128K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: 3c59x
>	Kernel modules: 3c59x
>
>02:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. A8V Deluxe or A8N-VM CSM Mainboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
>	Latency: 64 (8000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: I/O ports at e880 [size=128]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>
>02:0c.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller (rev 02)
>	Subsystem: ENE Technology Inc CB-710/2/4 Cardbus Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 168, Cache Line Size: 128 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fdd20000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>	Memory window 0: 44000000-47fff000 (prefetchable)
>	Memory window 1: 48000000-4bfff000
>	I/O window 0: 00001000-000010ff
>	I/O window 1: 00001400-000014ff
>	BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>
>02:0c.1 FLASH memory: ENE Technology Inc CB710 Memory Card Reader Controller
>	Subsystem: ENE Technology Inc CB710 Memory Card Reader Controller
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 10
>	Region 0: I/O ports at e800 [size=128]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 137183: 105798 | 291520 | 291521