Attachment 291570 Details for Bug 428554 – dmesg_2.6.23.13-106.i686.txt

dmesg_2.6.23.13-106.i686.txt

dmesg_2.6.23.13-106.i686.txt (text/text), 24.02 KB, created by Andrew Farris on 2008-01-14 07:00:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Farris

Created: 2008-01-14 07:00:07 UTC

Size: 24.02 KB

patch

obsolete

>Linux version 2.6.23.13-106.fc8 (mockbuild@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Jan 11 19:05:10 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff77000 (usable)
> BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS)
> BIOS-e820: 000000003ff79000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262007) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262007
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262007
>On node 0 totalpages: 262007
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 254 pages used for memmap
>  HighMem zone: 32377 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FD560, 0014 (r0 DELL  )
>ACPI: RSDT 000FD574, 0034 (r1 DELL    WS 340         8 ASL        61)
>ACPI: FACP 000FD5A8, 0074 (r1 DELL    WS 340         8 ASL        61)
>ACPI: DSDT FFFE3C22, 23AD (r1   DELL    dt_ex     1000 MSFT  100000D)
>ACPI: FACS 3FF77000, 0040
>ACPI: SSDT FFFE61C6, 0096 (r1   DELL    st_ex     1000 MSFT  100000D)
>ACPI: APIC 000FD61C, 005C (r1 DELL    WS 340         8 ASL        61)
>ACPI: BOOT 000FD678, 0028 (r1 DELL    WS 340         8 ASL        61)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 259961
>Kernel command line: ro root=LABEL=/ vga=792
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1993.954 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1030704k/1048028k available (2185k kernel code, 16564k reserved, 1116k data, 280k init, 130524k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc06224fd - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc06224fd   (2185 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3990.60 BogoMIPS (lpj=1995301)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: 3febf3ff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
>Total of 1 processors activated (3990.60 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 22:43:42  Date: 01/13/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbe5e, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:00: iomem range 0x1000000-0x3ff76fff could not be reserved
>pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:09: ioport range 0x800-0x85f has been reserved
>pnp: 00:09: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:09: ioport range 0x860-0x8ff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fc000000-fdffffff
>  PREFETCH window: f0000000-f7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: fe100000-fe2fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3153k freed
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1200264221.743:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 40EF1910D37BEFBE
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 6144k, total 131072k
>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>vesafb: protected mode interface info at c000:e4c0
>vesafb: pmi: set display start = c00ce4f6, set palette = c00ce560
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 128x48
>Switched to high resolution mode on CPU 0
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel i850 Chipset.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 8:962:754
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 845k
>ACPI: PCI Interrupt 0000:02:07.2[C] -> GSI 18 (level, low) -> IRQ 16
>ehci_hcd 0000:02:07.2: EHCI Host Controller
>ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:02:07.2: irq 16, io mem 0xfe1fdc00
>ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 17
>ohci_hcd 0000:02:07.0: OHCI Host Controller
>ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:02:07.0: irq 17, io mem 0xfe1ff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:02:07.1[B] -> GSI 17 (level, low) -> IRQ 18
>ohci_hcd 0000:02:07.1: OHCI Host Controller
>ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:02:07.1: irq 18, io mem 0xfe1fe000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ff80
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1f.4: irq 20, io base 0x0000ff60
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>usb 4-1: configuration #1 chosen from 1 choice
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input1
>input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1f.2-1
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input2
>input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1f.2-1
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>usb 4-2: new full speed USB device using uhci_hcd and address 3
>ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
>ata1.00: 78165360 sectors, multi 8: LBA 
>ata1.01: ATA-5: ST340016A, 3.75, max UDMA/100
>ata1.01: 78165360 sectors, multi 8: LBA 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>usb 4-2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input3
>input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1f.2-2
>input: Logitech USB Receiver as /class/input/input4
>input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1f.2-2
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb 5-1: not running at top speed; connect to a high speed hub
>usb 5-1: configuration #1 chosen from 1 choice
>hub 5-1:1.0: USB hub found
>ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB03, max UDMA/33
>ata2.01: ATAPI: LITE-ON LTR-24102M, 4DS3, max UDMA/33
>hub 5-1:1.0: 4 ports detected
>ata2.00: configured for UDMA/33
>usb 5-2: new low speed USB device using uhci_hcd and address 3
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST340016A        3.75 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      ST340016A        3.75 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 > sdb3
>sd 0:0:1:0: [sdb] Attached SCSI disk
>usb 5-2: configuration #1 chosen from 1 choice
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB03 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            LITE-ON  LTR-24102M       4DS3 PQ: 0 ANSI: 5
>hiddev97: USB HID v1.10 Device [APC Back-UPS ES 500 FW:824.B1.D USB FW:B1] on usb-0000:00:1f.4-2
>usb 5-1.1: new low speed USB device using uhci_hcd and address 4
>usb 5-1.1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input5
>input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1f.4-1.1
>ACPI: PCI Interrupt 0000:02:09.2[B] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:02:09.2, OHCI version 1.10
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>scsi2 : SBP-2 IEEE-1394
>firewire_core: created new fw device fw1 (0 config rom retries, S400)
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_sbp2: orb reply timed out, rcode=0x11
>firewire_sbp2: orb reply timed out, rcode=0x11
>firewire_sbp2: status write for unknown orb
>firewire_sbp2: orb reply timed out, rcode=0x11
>BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004
>printing eip: f8f60234 *pde = 3f458067 
>Oops: 0000 [#1] SMP 
>Modules linked in: firewire_sbp2 firewire_ohci firewire_core crc_itu_t ata_generic ata_piix libata sd_mod scsi_mod xfs uhci_hcd ohci_hcd ehci_hcd
>CPU:    0
>EIP:    0060:[<f8f60234>]    Not tainted VLI
>EFLAGS: 00010292   (2.6.23.13-106.fc8 #1)
>EIP is at sbp2_cancel_orbs+0x12/0xb2 [firewire_sbp2]
>eax: 00000000   ebx: f7c5f0ec   ecx: c1bb36b4   edx: c1bb36b4
>esi: f7c5f0c0   edi: c1981efc   ebp: c1bb3678   esp: c1981ef8
>ds: 007b   es: 007b   fs: 00d8  gs: 0000  ss: 0068
>Process firewire_sbp2 (pid: 429, ti=c1981000 task=c1bc1840 task.ti=c1981000)
>Stack: c0427c6f 00100100 00200200 c1bb36ac c1bb3600 f7c5f0c0 c1bb3678 f8f60434 
>       00000002 f0010000 0000ffff 00000002 0000ffc0 c1bb3658 f7c5f10c f7c5f0c0 
>       c1bb4400 0000ffc0 f8f6089f 00000000 00000000 c1981f70 c18f4fb0 c1bbeabc 
>Call Trace:
> [<c0427c6f>] default_wake_function+0x0/0xc
> [<f8f60434>] sbp2_send_management_orb+0x135/0x1f0 [firewire_sbp2]
> [<f8f6089f>] sbp2_login+0x59/0x19d [firewire_sbp2]
> [<f8f60846>] sbp2_login+0x0/0x19d [firewire_sbp2]
> [<c043a4c3>] run_workqueue+0x7d/0x109
> [<c043d5db>] prepare_to_wait+0x24/0x3f
> [<c043ad1c>] worker_thread+0x0/0xc4
> [<c043add6>] worker_thread+0xba/0xc4
> [<c043d491>] autoremove_wake_function+0x0/0x35
> [<c043d3ca>] kthread+0x38/0x5e
> [<c043d392>] kthread+0x0/0x5e
> [<c0405dbb>] kernel_thread_helper+0x7/0x10
> =======================
>Code: 24 08 8b 54 24 40 89 54 24 04 89 f2 e8 a2 75 f9 ff 83 c4 2c 5b 5e 5f 5d c3 55 57 56 89 c6 53 83 ec 0c 8b 00 8d 7c 24 04 8d 5e 2c <8b> 40 04 8b 68 74 89 7c 24 04 89 7c 24 08 83 ed 18 8b 45 14 05 
>EIP: [<f8f60234>] sbp2_cancel_orbs+0x12/0xb2 [firewire_sbp2] SS:ESP 0068:c1981ef8
>XFS mounting filesystem sdb9
>Ending clean XFS mount for filesystem: sdb9
>security:  8 users, 11 roles, 2368 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 213652 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb9, type xfs), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1200264244.274:2): policy loaded auid=4294967295
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 67x/40x writer cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sr 1:0:0:0: Attached scsi generic sg2 type 5
>sr 1:0:1:0: Attached scsi generic sg3 type 5
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>input: PC Speaker as /class/input/input6
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 18
>input: Power Button (FF) as /class/input/input7
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input8
>ACPI: Power Button (CM) [VBTN]
>Intel 82802 RNG detected
>FDC 0 is a post-1991 82077
>Linux Tulip driver version 1.1.15 (Feb 27, 2007)
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 19 (level, low) -> IRQ 19
>tulip0:  MII transceiver #1 config 1000 status 7849 advertising 01e1.
>eth0: ADMtek Comet rev 17 at MMIO 0xfe1fd800, 00:04:5A:7D:9F:01, IRQ 19.
>ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 18 (level, low) -> IRQ 16
>3c59x: Donald Becker and others.
>0000:02:0c.0: 3Com PCI 3c905C Tornado at f9040c00.
>gameport: EMU10K1 is pci0000:02:09.1/gameport0, io 0xecd8, speed 962kHz
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 18
>phy0: Selected rate control algorithm 'pid'
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50193 usecs
>intel8x0: clocking to 41155
>usbcore: registered new interface driver snd-usb-audio
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb7, type ext3), uses xattr
>XFS mounting filesystem sdb5
>Ending clean XFS mount for filesystem: sdb5
>SELinux: initialized (dev sdb5, type xfs), uses xattr
>fuse init (API version 7.8)
>SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>XFS mounting filesystem sdb11
>Ending clean XFS mount for filesystem: sdb11
>SELinux: initialized (dev sdb11, type xfs), uses xattr
>XFS mounting filesystem sdb8
>Ending clean XFS mount for filesystem: sdb8
>SELinux: initialized (dev sdb8, type xfs), uses xattr
>XFS mounting filesystem sdb10
>Ending clean XFS mount for filesystem: sdb10
>SELinux: initialized (dev sdb10, type xfs), uses xattr
>SELinux: initialized (dev sdb3, type vfat), uses genfs_contexts
>Adding 2120540k swap on /dev/sdb6.  Priority:-1 extents:1 across:2120540k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>eth1:  setting full-duplex.
>eth1: no IPv6 routers present
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>NET: Registered protocol family 5
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17

Actions: View

Attachments on bug 428554: 291489 | 291490 | 291491 | 291568 | 291569 | 291570