Attachment 291901 Details for Bug 183119 – console log

console log

panic_trace (text/plain), 82.91 KB, created by Roger Mach on 2008-01-16 22:19:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Roger Mach

Created: 2008-01-16 22:19:32 UTC

Size: 82.91 KB

patch

obsolete

>Linux version 2.6.9-67.ELsmp (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Wed Nov 7 13:56:44 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
> BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cffbce40 (usable)
> BIOS-e820: 00000000cffbce40 - 00000000cffd0000 (ACPI data)
> BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Bootmem setup node 0 0000000000000000-0000000130000000
>DMI 2.4 present.
>ServerWorks chipset detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x588
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
>Processor #6 6:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
>Processor #7 6:15 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>Setting APIC routing to flat
>ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x0d] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 13, version 32, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
>Checking aperture...
>Built 1 zonelists
>Kernel command line: ro root=/dev/VolGroup01/LogVol00 console=tty1 console=ttyS1,19200n8
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2333.474 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Placing software IO TLB between 0x1ca3000 - 0x5ca3000
>Memory: 4040204k/4980736k available (2126k kernel code, 0k reserved, 1313k data, 212k init)
>Calibrating delay using timer specific routine.. 4671.82 BogoMIPS (lpj=2335914)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>using mwait in idle threads.
>CPU0: Physical Processor ID: 0
>CPU0: Processor Core ID: 0
>CPU0: Initial APIC ID: 0
>ACPI: System reset via FADT Reset Register is supported
>Using IO APIC NMI watchdog
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU0: Physical Processor ID: 0
>CPU0: Processor Core ID: 0
>CPU0: Initial APIC ID: 0
>CPU0: Intel(R) Xeon(R) CPU            5148  @ 2.33GHz stepping 05
>per-CPU timeslice cutoff: 4095.42 usecs.
>task migration cache decay timeout: 4 msecs.
>Booting processor 1/6 rip 6000 rsp 10005d35f58
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4666.24 BogoMIPS (lpj=2333121)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU1: Physical Processor ID: 3
>CPU1: Processor Core ID: 6
>CPU1: Initial APIC ID: 6
>Intel(R) Xeon(R) CPU            5148  @ 2.33GHz stepping 05
>Booting processor 2/1 rip 6000 rsp 10005d6df58
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4666.16 BogoMIPS (lpj=2333080)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU2: Physical Processor ID: 0
>CPU2: Processor Core ID: 1
>CPU2: Initial APIC ID: 1
>Intel(R) Xeon(R) CPU            5148  @ 2.33GHz stepping 05
>Booting processor 3/7 rip 6000 rsp 1012bd23f58
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4666.22 BogoMIPS (lpj=2333110)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU3: Physical Processor ID: 3
>CPU3: Processor Core ID: 7
>CPU3: Initial APIC ID: 7
>Intel(R) Xeon(R) CPU            5148  @ 2.33GHz stepping 05
>Total of 4 processors activated (18670.45 BogoMIPS).
>activating NMI Watchdog ... done.
>testing NMI watchdog ... OK.
>Using local APIC timer interrupts.
>Detected 20.834 MHz APIC timer.
>checking TSC synchronization across 4 CPUs: passed.
>Brought up 4 CPUs
>time.c: Using PIT/TSC based timekeeping.
>checking if image is initramfs... it is
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LP00] (IRQs *5)
>ACPI: PCI Interrupt Link [LP01] (IRQs *7)
>ACPI: PCI Interrupt Link [LP02] (IRQs *11)
>ACPI: PCI Interrupt Link [LP03] (IRQs *7)
>ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
>ACPI: PCI Interrupt Link [LP05] (IRQs *7)
>ACPI: PCI Interrupt Link [LP06] (IRQs *11)
>ACPI: PCI Interrupt Link [LP07] (IRQs *7)
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 18 (level, low) -> IRQ 177
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 185
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 193
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 201
>GSI 21 sharing vector 0xD1 and IRQ 21
>ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 25 (level, low) -> IRQ 209
>GSI 22 sharing vector 0xD9 and IRQ 22
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 217
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 23 sharing vector 0xE1 and IRQ 23
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 225
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1201095533.469:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 666031A17F0A96D8
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports C1, 8 throttling states)
>ACPI: Processor [CPU1] (supports C1, 8 throttling states)
>ACPI: Processor [CPU2] (supports C1, 8 throttling states)
>ACPI: Processor [CPU3] (supports C1, 8 throttling states)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>tyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide0: I/O resource 0x1F0-0x1F7 not free.
>ide0: ports already in use, skipping probe
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI wakeup devices: 
>PCI0 
>ACPI: (supports S0 S4 S5)
>Freeing unused kernel memory: 212k freed
>Red Hat nash version 4.2.1.8 starting
>Mounted /SCSI subsystem initialized
>proc filesystem
Fusion MPT base driver 3.02.99.00rh
>
>Mounting sysfs
Copyright (c) 1999-2007 LSI Logic Corporation
>
>Creating /dev
>Fusion MPT FC Host driver 3.02.99.00rh
>Starting udev
>LFusion MPT SPI Host driver 3.02.99.00rh
>oading scsi_mod.Fusion MPT SAS Host driver 3.02.99.00rh
>ko module
>LoadiACPI: PCI Interrupt 0000:08:01.0[A] -> ng sd_mod.ko modGSI 25 (level, low) -> IRQ 209
>ule
>Loading mptmptbase: Initiating ioc0 bringup
>base.ko module
>Loading mptscsi.ko module
>Loading mptfc.ko module
>Loading mptspi.ko module
>Loading mptsas.ko module
>ioc0: SAS1064: Capabilities={Initiator}
>scsi0 : ioc0: LSISAS1064, FwRev=01175100h, Ports=1, MaxQ=268, IRQ=209
>Using cfq io scheduler
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>mptbase: Initiating ioc1 bringup
>ioc1: SAS1064E: Capabilities={Initiator}
>scsi1 : ioc1: LSISAS1064E, FwRev=01160000h, Ports=1, MaxQ=268, IRQ=169
>  Vendor: IBM-ESXS  Model: ST9146802SS       Rev: B007
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 286748000 512-byte hdwr sectors (146815 MB)
>SCSI device sda: drive cache: write through
>SCSI device sda: 286748000 512-byte hdwr sectors (146815 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 sda2
>Attached scsi disk sda at scsi1, channel 0, id 1, lun 0
>Loading mptscsihata_piix 0000:00:1f.2: MAP [.ko module
>Load P0ing libata.ko mo P2dule
>Loading at IDE IDEa_piix.ko module ]
>
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 201
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2A00 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2A08 irq 15
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata2: port disabled. ignoring.
>Loading dm-mod.kdevice-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>o module
>Loading jbd.ko module
>Loading ext3.ko module
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may takkjournald starting.  Commit interval 5 seconds
>e a while...
>  EXT3-fs: mounted filesystem with ordered data mode.
>Found volume group "VolGroup01" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VolGroup01" now active
>Creating root device
>Mounting root filesystem
>Switching to new root
>INIT: version 2.85 booting
>		Welcome to Red Hat Enterprise Linux AS
>		Press 'I' to enter interactive startup.
>Starting udev:  [  OK  ]
>Initializing hardware...  storage network audio done[  OK  ]
>Configuring kernel parameters:  [  OK  ]
>Setting clock  (utc): Wed Jan 23 05:39:27 PST 2008 [  OK  ]
>Setting hostname localhost.localdomain:  [  OK  ]
>Checking root filesystem
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup01/LogVol00 
>/dev/VolGroup01/LogVol00: clean, 2160313/17645568 files, 5272090/35282944 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>No RAID disks
>Setting up Logical Volume Management: [  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 
>/boot: clean, 43/26104 files, 22307/104388 blocks
>[  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling swap space:  [  OK  ]
>INIT: Entering runlevel: 5
>Entering non-interactive startup
>Applying Intel Microcode update: [  OK  ]
>Starting readahead_early:  [  OK  ]
>Checking for new hardware
>Starting pcmcia:  [  OK  ]
>Setting network parameters:  [  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  [  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>Starting irqbalance: [  OK  ]
>Starting portmap: [  OK  ]
>Starting NFS statd: [  OK  ]
>Starting RPC idmapd: [  OK  ]
>Mounting other filesystems:  [  OK  ]
>Starting lm_sensors:  [  OK  ]
>Starting automount: No Mountpoints Defined[  OK  ]
>Starting smartd: [FAILED]
>Starting acpi daemon: [  OK  ]
>Starting cups: [  OK  ]
>Starting sshd:[  OK  ]
>Starting xinetd: [  OK  ]
>Starting sendmail: make: Warning: File `sendmail.cf' has modification time 1.1e+04 s in the future
>make: warning:  Clock skew detected.  Your build may be incomplete.
>[  OK  ]
>Starting sm-client: [  OK  ]
>Starting console mouse services: [  OK  ]
>Starting crond: [  OK  ]
>Starting xfs: [  OK  ]
>Starting anacron: [  OK  ]
>Starting atd: [  OK  ]
>Starting readahead:  [  OK  ]
>Starting system message bus: [  OK  ]
>Starting cups-config-daemon: [  OK  ]
>Starting HAL daemon: [  OK  ]
>
>Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
>Kernel 2.6.9-67.ELsmp on an x86_64
>
>elm3a155 login: root
>Password: 
>Last login: Wed Jan 23 05:41:02 from XXXXXXXXXXXXXXXXXXXXXXX
>[root@elm3a155 ~]# lspci 
>00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
>00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1)
>00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1)
>00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 4 (rev b1)
>00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1)
>00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 (rev b1)
>00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1)
>00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1)
>00:10.0 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev b1)
>00:10.1 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev b1)
>00:10.2 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev b1)
>00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
>00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
>00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
>00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
>00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09)
>00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09)
>00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09)
>00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09)
>00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09)
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9)
>00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
>00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA Storage Controller IDE (rev 09)
>01:01.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
>02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS (rev 02)
>03:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3)
>04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
>05:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3)
>06:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
>07:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01)
>07:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01)
>08:01.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS (rev 03)
>09:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01)
>09:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01)
>[root@elm3a155 ~]# lspci -v
>00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Flags: bus master, fast devsel, latency 0, IRQ 169
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>	Capabilities: [100] Advanced Error Reporting
>
>00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=07, subordinate=0b, sec-latency=0
>	I/O behind bridge: 00005000-00005fff
>	Memory behind bridge: d5000000-d6ffffff
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>	Capabilities: [100] Advanced Error Reporting
>
>00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>	Capabilities: [100] Advanced Error Reporting
>
>00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 4 (rev b1) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>	Capabilities: [100] Advanced Error Reporting
>
>00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
>	I/O behind bridge: 00006000-0000ffff
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>	Capabilities: [100] Advanced Error Reporting
>
>00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 (rev b1) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
>	Memory behind bridge: da000000-dcffffff
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>	Capabilities: [100] Advanced Error Reporting
>
>00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
>	Memory behind bridge: d7000000-d9ffffff
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>	Capabilities: [100] Advanced Error Reporting
>
>00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1)
>	Subsystem: IBM: Unknown device 02dd
>	Flags: bus master, fast devsel, latency 0, IRQ 169
>	Memory at fe700000 (64-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>	Capabilities: [6c] Express Unknown type IRQ 0
>
>00:10.0 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev b1)
>	Subsystem: IBM: Unknown device 02dd
>	Flags: fast devsel
>
>00:10.1 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Flags: fast devsel
>
>00:10.2 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Flags: fast devsel
>
>00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Flags: fast devsel
>
>00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Flags: fast devsel
>
>00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Flags: fast devsel
>
>00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Flags: fast devsel
>
>00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00004000-00004fff
>	Memory behind bridge: dd000000-deffffff
>	Capabilities: [40] Express Root Port (Slot-) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>	Capabilities: [90] #0d [0000]
>	Capabilities: [a0] Power Management version 2
>	Capabilities: [100] Virtual Channel
>	Capabilities: [180] Unknown (5)
>
>00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: IBM: Unknown device 02dd
>	Fllags: bus master, medium devsel, latency 0, IRQ 177
>	I/O ports at 2200 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: IBM: Unknown device 02dd
>	Flags: bus master, medium devsel, latency 0, IRQ 185
>	I/O ports at 2600 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: IBM: Unknown device 02dd
>	Flags: bus master, medium devsel, latency 0, IRQ 193
>	I/O ports at 2800 [size=32]
>
>00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
>	Subsystem: IBM: Unknown device 02dd
>	Flags: bus master, medium devsel, latencsy 0, IRQ 201
>	Memory at f9000000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Debug port
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: f8000000-f8ffffff
>	Prefetchable memory behind bridge: 00000000f0000000-00000000f7f00000
>	Capabilities: [50] #0d [0000]
>
>00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
>	Flags: bus master, medium devsel, latency 0
>
>00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA Storage Conpctroller IDE (rev 09) (prog-if 80 [Master])
>	Subsystem: IBM: Unknown device 02dd
>	Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 201
>	I/O ports at <unassigned>
>	I/O ports at <unassigned>
>	I/O ports at <unassigned>
>	I/O ports at <unassigned>
>	I/O ports at 2a00 [size=16]
>	Capabilities: [70] Power Management version 2
>
>01:01.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA])
>	Subsystem: IBM: Unknown device 0305
>	Flags: bus master, stepping, medium devsel, latency 64, IRQ 225
>	Memory at f0000000 (32-bit, prefetchable) [size=128M]
>	I/O ports at 3000 [size=256]
>	Memory at f8000000 (32-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>
>02:00.0 SCSI storage controller: LSI Logic / Symbios Li ogic SAS1064E PCI-Express Fusion-MPT SAS (rev 02)
>	Subsystem: IBM: Unknown device 0306
>	Flags: bus master, fast devsel, latency 0, IRQ 169
>	I/O ports at 4000 [size=256]
>	Memory at deffc000 (64-bit, non-prefetchable) [size=16K]
>	Memory at defe0000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [68] Express Endpoint IRQ 0
>	Capabilities: [98] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
>	Capabilities: [100] Advanced Error Reporting
>
>03:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=03, secondary=04, subordinate=04, sec-latency=64
>	Memory behind bridge: da-000000-dcffffff
>	Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
>	Capabilities: [90] PCI-X bridge device.
>	Capabilities: [b0] Power Management version 2
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [14c] Power Budgeting
>	Capabilities: [160] Device Serial Number 4a-05-c2-fe-ff-5e-14-00
>
>04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
>	Subsystem: IBM: Unknown device 0327
>	Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 50
>	Memory at da000000 (64-bit, non-prefetchable) [size=32M]
>	Capabilities: [40] PCI-X non-bridge device.
>	Capabilities: [48] Power Management version 2
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
>
>v 05:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=05, secondary=06, subordinate=06, sec-latency=64
>	Memory behind bridge: d7000000-d9ffffff
>	Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
>	Capabilities: [90] PCI-X bridge device.
>	Capabilities: [b0] Power Management version 2
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [14c] Power Budgeting
>	Capabilities: [160] Device Serial Number 4c-05-c2-fe-ff-5e-14-00
>
>06:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
>	Subsystem: IBM: Unknown device 0327
>	Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 193
>	Memory at d8000000 (64-bit, non-prefetchable) -[size=32M]
>	Capabilities: [40] PCI-X non-bridge device.
>	Capabilities: [48] Power Management version 2
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>
>07:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=07, secondary=09, subordinate=0b, sec-latency=0
>	Capabilities: [44] Express Upstream Port IRQ 0
>	Capabilities: [70] Power Management version 2
>	Capabilities: [80] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>07:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, lvatency 0
>	Bus: primary=07, secondary=08, subordinate=08, sec-latency=64
>	I/O behind bridge: 00005000-00005fff
>	Memory behind bridge: d5000000-d6ffffff
>	Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>	Capabilities: [6c] Power Management version 2
>	Capabilities: [80] #0d [0000]
>	Capabilities: [d8] PCI-X bridge device.
>	Capabilities: [100] Advanced Error Reporting
>
>08:01.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS (rev 03)
>	Subsystem: LSI Logic / Symbios Logic: Unknown device 3110
>	Flags: bus master, 66Mhz, medium devsel, latency 72, IRQ 209
>	I/O ports at 5000 [disabled] [size=256]
>	Memory at d6ffc000 (64-bit, non-prefetchable) [size=16K]
>	Memory at d6fe0000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [98] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>	Capabilities: [68] PCI-X non-bridge device.
>	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
>
>09:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=09, secondary=0b, subordinate=0b, sec-latency=0
>	Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
>	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>	Capabilities: [70] Power Management version 2
>	Capabilities: [80] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>09:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=0
>	Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
>	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>	Capabilities: [70] Power Management version 2
>	Capabilities: [80] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>[root@elm3a155 ~]# lspci -v -v
>00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Interrupt: pin A routed to IRQ 169
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: fee00020  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [100] Advanced Error Reporting
>
>00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=00, secondary=07, subordinate=0b, sec-latency=0
>	I/O behind bridge: 00005000-00005fff
>	Memory behind bridge: d5000000-d6ffffff
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: fee00020  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 2
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [100] Advanced Error Reporting
>
>00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 3
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [100] Advanced Error Reporting
>
>00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 4 (rev b1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: fee00020  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 4
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [100] Advanced Error Reporting
>
>00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
>	I/O behind bridge: 00006000-0000ffff
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: fee00020  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 5
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [100] Advanced Error Reporting
>
>00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 (rev b1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
>	Memory behind bridge: da000000-dcffffff
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: fee00020  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 6
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [100] Advanced Error Reporting
>
>00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
>	Memory behind bridge: d7000000-d9ffffff
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: fee00020  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 7
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [100] Advanced Error Reporting
>
>00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1)
>	Subsystem: IBM: Unknown device 02dd
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 169
>	Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [6c] Express Unknown type IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
>		Link: Latency L0s <64ns, L1 <1us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed unknown, Width x0
>
>00:10.0 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev b1)
>	Subsystem: IBM: Unknown device 02dd
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:10.1 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:10.2 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
>	Subsystem: Intel Corporation: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00004000-00004fff
>	Memory behind bridge: dd000000-deffffff
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [90] #0d [0000]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100] Virtual Channel
>	Capabilities: [180] Unknown (5)
>
>00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: IBM: Unknown device 02dd
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 177
>	Region 4: I/O ports at 2200 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: IBM: Unknown device 02dd
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 185
>	Region 4: I/O ports at 2600 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: IBM: Unknown device 02dd
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 193
>	Region 4: I/O ports at 2800 [size=32]
>
>00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
>	Subsystem: IBM: Unknown device 02dd
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 201
>	Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: f8000000-f8ffffff
>	Prefetchable memory behind bridge: 00000000f0000000-00000000f7f00000
>	Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [50] #0d [0000]
>
>00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA Storage Controller IDE (rev 09) (prog-if 80 [Master])
>	Subsystem: IBM: Unknown device 02dd
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 201
>	Region 0: I/O ports at <unassigned>
>	Region 1: I/O ports at <unassigned>
>	Region 2: I/O ports at <unassigned>
>	Region 3: I/O ports at <unassigned>
>	Region 4: I/O ports at 2a00 [size=16]
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:01.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA])
>	Subsystem: IBM: Unknown device 0305
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (2000ns min), Cache Line Size 10
>	Interrupt: pin A routed to IRQ 225
>	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: I/O ports at 3000 [size=256]
>	Region 2: Memory at f8000000 (32-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS (rev 02)
>	Subsystem: IBM: Unknown device 0306
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Interrupt: pin A routed to IRQ 169
>	Region 0: I/O ports at 4000 [size=256]
>	Region 1: Memory at deffc000 (64-bit, non-prefetchable) [size=16K]
>	Region 3: Memory at defe0000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [68] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 4096 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 0
>		Link: Latency L0s <64ns, L1 <1us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [98] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
>		Vector table: BAR=1 offset=00002000
>		PBA: BAR=1 offset=00003000
>	Capabilities: [100] Advanced Error Reporting
>
>03:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=03, secondary=04, subordinate=04, sec-latency=64
>	Memory behind bridge: da000000-dcffffff
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
>		Link: Latency L0s <4us, L1 <4us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [90] PCI-X bridge device.
>		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
>		Status: Bus=3 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
>		: Upstream: Capacity=0, Commitment Limit=0
>		: Downstream: Capacity=0, Commitment Limit=0
>	Capabilities: [b0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [14c] Power Budgeting
>	Capabilities: [160] Device Serial Number 4a-05-c2-fe-ff-5e-14-00
>
>04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
>	Subsystem: IBM: Unknown device 0327
>	Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (16000ns min), Cache Line Size 10
>	Interrupt: pin A routed to IRQ 50
>	Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
>	Capabilities: [40] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=3 OST=4
>		Status: Bus=4 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=4, DMCRS=2, RSCEM-
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee00000  Data: 4032
>
>05:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=05, secondary=06, subordinate=06, sec-latency=64
>	Memory behind bridge: d7000000-d9ffffff
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
>		Link: Latency L0s <4us, L1 <4us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [90] PCI-X bridge device.
>		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
>		Status: Bus=5 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
>		: Upstream: Capacity=0, Commitment Limit=0
>		: Downstream: Capacity=0, Commitment Limit=0
>	Capabilities: [b0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [14c] Power Budgeting
>	Capabilities: [160] Device Serial Number 4c-05-c2-fe-ff-5e-14-00
>
>06:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
>	Subsystem: IBM: Unknown device 0327
>	Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (16000ns min), Cache Line Size 10
>	Interrupt: pin A routed to IRQ 193
>	Region 0: Memory at d8000000 (64-bit, non-prefetchable) [size=32M]
>	Capabilities: [40] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=3 OST=4
>		Status: Bus=6 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=4, DMCRS=2, RSCEM-
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: d7b7beb22eab4d5c  Data: a426
>
>07:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=07, secondary=09, subordinate=0b, sec-latency=0
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express Upstream Port IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: SlotPowerLimit 0.000000
>		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>07:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=07, secondary=08, subordinate=08, sec-latency=64
>	I/O behind bridge: 00005000-00005fff
>	Memory behind bridge: d5000000-d6ffffff
>	Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [6c] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] #0d [0000]
>	Capabilities: [d8] PCI-X bridge device.
>		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
>		Status: Bus=0 Dev=0 Func=3 64bit- 133MHz- SCD- USC-, SCO-, SRD-
>		: Upstream: Capacity=65535, Commitment Limit=65535
>		: Downstream: Capacity=65535, Commitment Limit=65535
>	Capabilities: [100] Advanced Error Reporting
>
>08:01.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS (rev 03)
>	Subsystem: LSI Logic / Symbios Logic: Unknown device 3110
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 72 (16000ns min, 2500ns max), Cache Line Size 10
>	Interrupt: pin A routed to IRQ 209
>	Region 0: I/O ports at 5000 [disabled] [size=256]
>	Region 1: Memory at d6ffc000 (64-bit, non-prefetchable) [size=16K]
>	Region 3: Memory at d6fe0000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [98] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [68] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=3 OST=4
>		Status: Bus=8 Dev=1 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=2, DMOST=6, DMCRS=4, RSCEM-
>	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
>		Vector table: BAR=1 offset=00002000
>		PBA: BAR=1 offset=00003000
>
>09:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=09, secondary=0b, subordinate=0b, sec-latency=0
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s <512ns, L1 unlimited
>		Link: ASPM Disabled CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>09:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size 10
>	Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=0
>	Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s <512ns, L1 unlimited
>		Link: ASPM Disabled CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D2 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>[root@elm3a155 ~]# dmidecode
># dmidecode 2.2
>SMBIOS 2.4 present.
>43 structures occupying 2167 bytes.
>Table at 0x000F1040.
>Handle 0x0000
>	DMI type 0, 24 bytes.
>	BIOS Information
>		Vendor: IBM
>		Version: -[MJE114AUS-1.04]-
>		Release Date: 09/06/2007
>		Address: 0xF0B00
>		Runtime Size: 62720 bytes
>		ROM Size: 4096 kB
>		Characteristics:
>			PCI is supported
>			BIOS is upgradeable
>			BIOS shadowing is allowed
>			Boot from CD is supported
>			Selectable boot is supported
>			Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
>			Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
>			5.25"/360 KB floppy services are supported (int 13h)
>			5.25"/1.2 MB floppy services are supported (int 13h)
>			3.5"/720 KB floppy services are supported (int 13h)
>			3.5"/2.88 MB floppy services are supported (int 13h)
>			Print screen service is supported (int 5h)
>			8042 keyboard services are supported (int 9h)
>			Serial services are supported (int 14h)
>			Printer services are supported (int 17h)
>			CGA/mono video services are supported (int 10h)
>			ACPI is supported
>			USB legacy is supported
>			I2O boot is supported
>			Function key-initiated network boot is supported
>Handle 0x0001
>	DMI type 1, 27 bytes.
>	System Information
>		Manufacturer: IBM
>		Product Name: IBM eServer BladeCenter HS21 -[7995SWZ]-
>		Version: Not Specified
>		Serial Number: 23A0114
>		UUID: 808E20E4-D33D-B601-B229-00145EC2054A
>		Wake-up Type: Power Switch
>Handle 0x0002
>	DMI type 2, 55 bytes.
>	Base Board Information
>		Manufacturer: IBM
>		Product Name: Server Blade
>		Version: Not Specified
>		Serial Number: Not Specified
>		Asset Tag: Not Specified
>		Features:
>		Board is a hosting board
>		Board is removable
>		Board is replaceable
>		Board is hot swappable
>		Location In Chassis: Slot01
>		Chassis Handle: 0x0003
>		Type: Server Blade
>		Contained Object Handlers: 0
>Handle 0x0003
>	DMI type 3, 13 bytes.
>	Chassis Information
>		Manufacturer: IBM
>		Type: Main Server Chassis
>		Lock: Not Present
>		Version: Not Specified
>		Serial Number: -[UUID:A22CB06160AF11D7A5EC00096BCA98BE]-
>		Asset Tag:                                 
>		Boot-up State: Safe
>		Power Supply State: Unknown
>		Thermal State: Unknown
>		Security Status: Unknown
>Handle 0x0004
>	DMI type 7, 19 bytes.
>	Cache Information
>		Socket Designation: Internal L1 Cache
>		Configuration: Enabled, Not Socketed, Level 1
>		Operational Mode: Varies With Memory Address
>		Location: Internal
>		Installed Size: 32 KB
>		Maximum Size: 32 KB
>		Supported SRAM Types:
>			Synchronous
>		Installed SRAM Type: Synchronous
>		Speed: Unknown
>		Error Correction Type: Unknown
>		System Type: Unified
>		Associativity: 4-way Set-associative
>Handle 0x0005
>	DMI type 7, 19 bytes.
>	Cache Information
>		Socket Designation: Internal L2 Cache
>		Configuration: Enabled, Not Socketed, Level 2
>		Operational Mode: Varies With Memory Address
>		Location: Internal
>		Installed Size: 4096 KB
>		Maximum Size: 4096 KB
>		Supported SRAM Types:
>			Burst
>		Installed SRAM Type: Burst
>		Speed: Unknown
>		Error Correction Type: Unknown
>		System Type: Unified
>		Associativity: 8-way Set-associative
>Handle 0x0006
>	DMI type 7, 19 bytes.
>	Cache Information
>		Socket Designation: Internal L1 Cache
>		Configuration: Enabled, Not Socketed, Level 1
>		Operational Mode: Varies With Memory Address
>		Location: Internal
>		Installed Size: 32 KB
>		Maximum Size: 32 KB
>		Supported SRAM Types:
>			Synchronous
>		Installed SRAM Type: Synchronous
>		Speed: Unknown
>		Error Correction Type: Unknown
>		System Type: Unified
>		Associativity: 4-way Set-associative
>Handle 0x0007
>	DMI type 7, 19 bytes.
>	Cache Information
>		Socket Designation: Internal L2 Cache
>		Configuration: Enabled, Not Socketed, Level 2
>		Operational Mode: Varies With Memory Address
>		Location: Internal
>		Installed Size: 4096 KB
>		Maximum Size: 4096 KB
>		Supported SRAM Types:
>			Burst
>		Installed SRAM Type: Burst
>		Speed: Unknown
>		Error Correction Type: Unknown
>		System Type: Unified
>		Associativity: 8-way Set-associative
>Handle 0x0008
>	DMI type 4, 32 bytes.
>	Processor Information
>		Socket Designation: Socket 1 CPU 1
>		Type: Central Processor
>		Family: Xeon
>		Manufacturer: GenuineIntel
>		ID: F5 06 00 00 01 03 00 00
>		Signature: Type 0, Family 6, Model F, Stepping 5
>		Flags:
>			FPU (Floating-point unit on-chip)
>			CX8 (CMPXCHG8 instruction supported)
>			APIC (On-chip APIC hardware supported)
>		Version: Intel Xeon
>		Voltage: 2.9 V
>		External Clock: 333 MHz
>		Max Speed: 4000 MHz
>		Current Speed: 2333 MHz
>		Status: Populated, Enabled
>		Upgrade: ZIF Socket
>		L1 Cache Handle: 0x0004
>		L2 Cache Handle: 0x0005
>		L3 Cache Handle: Not Provided
>Handle 0x0009
>	DMI type 4, 32 bytes.
>	Processor Information
>		Socket Designation: Socket 2 CPU 2
>		Type: Central Processor
>		Family: Xeon
>		Manufacturer: GenuineIntel
>		ID: F5 06 00 00 01 03 00 00
>		Signature: Type 0, Family 6, Model F, Stepping 5
>		Flags:
>			FPU (Floating-point unit on-chip)
>			CX8 (CMPXCHG8 instruction supported)
>			APIC (On-chip APIC hardware supported)
>		Version: Intel Xeon
>		Voltage: 2.9 V
>		External Clock: 333 MHz
>		Max Speed: 4000 MHz
>		Current Speed: 2333 MHz
>		Status: Populated, Enabled
>		Upgrade: ZIF Socket
>		L1 Cache Handle: 0x0006
>		L2 Cache Handle: 0x0007
>		L3 Cache Handle: Not Provided
>Handle 0x000A
>	DMI type 8, 9 bytes.
>	Port Connector Information
>		Internal Reference Designator: Not Specified
>		Internal Connector Type: None
>		External Reference Designator: USB 1
>		External Connector Type: Access Bus (USB)
>		Port Type: USB
>Handle 0x000B
>	DMI type 8, 9 bytes.
>	Port Connector Information
>		Internal Reference Designator: Not Specified
>		Internal Connector Type: None
>		External Reference Designator: USB 2
>		External Connector Type: Access Bus (USB)
>		Port Type: USB
>Handle 0x000C
>	DMI type 8, 9 bytes.
>	Port Connector Information
>		Internal Reference Designator: External SAS (Channel A)
>		Internal Connector Type: 68 Pin Dual Inline
>		External Reference Designator: Not Specified
>		External Connector Type: None
>		Port Type: SCSI Wide
>Handle 0x000D
>	DMI type 8, 9 bytes.
>	Port Connector Information
>		Internal Reference Designator: External SAS (Channel A)
>		Internal Connector Type: 68 Pin Dual Inline
>		External Reference Designator: Not Specified
>		External Connector Type: None
>		Port Type: SCSI Wide
>Handle 0x000E
>	DMI type 8, 9 bytes.
>	Port Connector Information
>		Internal Reference Designator: Not Specified
>		Internal Connector Type: None
>		External Reference Designator: Gigabit Ethernet
>		External Connector Type: RJ-45
>		Port Type: Network Port
>Handle 0x000F
>	DMI type 8, 9 bytes.
>	Port Connector Information
>		Internal Reference Designator: Not Specified
>		Internal Connector Type: None
>		External Reference Designator: Gigabit Ethernet
>		External Connector Type: RJ-45
>		Port Type: Network Port
>Handle 0x0010
>	DMI type 10, 12 bytes.
>	On Board Device Information
>		Type: Video
>		Status: Enabled
>		Description: ATI RN50 
>	On Board Device Information
>		Type: Ethernet
>		Status: Enabled
>		Description: Ethernet 1 BroadCom 5708S Ethernet Controller
>	On Board Device Information
>		Type: Ethernet
>		Status: Enabled
>		Description: Ethernet 2 BroadCom 5708S Ethernet Controller
>	On Board Device Information
>		Type: SCSI Controller
>		Status: Disabled
>		Description: LSI Logic SAS 1064E SAS Adapter
>Handle 0x0011
>	DMI type 11, 5 bytes.
>	OEM Strings
>		String 1: IBM Diagnostics -[MJYT02AUS]-
>		String 2: IBM BaseBoard Management Controller -[MJBT06D  ]-
>		String 3:                                            
>Handle 0x0012
>	DMI type 12, 5 bytes.
>	System Configuration Options
>		Option 1: SW2-8 Power On Password Bypass
>		Option 2: SW2-8 toggle, Bypass POP on next boot
>Handle 0x0013
>	DMI type 12, 5 bytes.
>	System Configuration Options
>		Option 1: SW2-5: WOL Availability
>		Option 2: SW2-5 off: Controlled by BMC default
>		Option 3: SW2-5 on: WOL Disabled
>Handle 0x0014
>	DMI type 12, 5 bytes.
>	System Configuration Options
>		Option 1: SW2-4 Force Power On
>		Option 2: SW2-4 on, Force power on
>		Option 3: SW2-4 off, Normal operation
>Handle 0x0015
>	DMI type 12, 5 bytes.
>	System Configuration Options
>		Option 1: SW2-1Flash ROM page swap jumper
>		Option 2: SW2-1 off boot from Primary-on(default)
>		Option 3: SW2-1 on boot from backup
>		Option 4: Changing to SW2-1 will change 
>		Option 5: which of the two pages of Flash ROM is used when 
>		Option 6: the system is started.
>Handle 0x0016
>	DMI type 13, 22 bytes.
>	BIOS Language Information
>		Installable Languages: 1
>			en|US|iso8859-1
>		Currently Installed Language: en|US|iso8859-1
>Handle 0x0017
>	DMI type 16, 15 bytes.
>	Physical Memory Array
>		Location: Proprietary Add-on Card
>		Use: System Memory
>		Error Correction Type: Multi-bit ECC
>		Maximum Capacity: 32 GB
>		Error Information Handle: Not Provided
>		Number Of Devices: 8
>Handle 0x0018
>	DMI type 17, 21 bytes.
>	Memory Device
>		Array Handle: 0x0017
>		Error Information Handle: Not Provided
>		Total Width: 72 bits
>		Data Width: 64 bits
>		Size: 1024 MB
>		Form Factor: DIMM
>		Set: 1
>		Locator: DIMM4
>		Bank Locator: Bank 1a
>		Type: DDR
>		Type Detail: Synchronous
>Handle 0x0019
>	DMI type 17, 21 bytes.
>	Memory Device
>		Array Handle: 0x0017
>		Error Information Handle: Not Provided
>		Total Width: 72 bits
>		Data Width: 64 bits
>		Size: 1024 MB
>		Form Factor: DIMM
>		Set: 1
>		Locator: DIMM2
>		Bank Locator: Bank 1b
>		Type: DDR
>		Type Detail: Synchronous
>Handle 0x001A
>	DMI type 17, 21 bytes.
>	Memory Device
>		Array Handle: 0x0017
>		Error Information Handle: Not Provided
>		Total Width: 72 bits
>		Data Width: 64 bits
>		Size: 1024 MB
>		Form Factor: DIMM
>		Set: 3
>		Locator: DIMM3
>		Bank Locator: Bank 3a
>		Type: DDR
>		Type Detail: Synchronous
>Handle 0x001B
>	DMI type 17, 21 bytes.
>	Memory Device
>		Array Handle: 0x0017
>		Error Information Handle: Not Provided
>		Total Width: 72 bits
>		Data Width: 64 bits
>		Size: 1024 MB
>		Form Factor: DIMM
>		Set: 3
>		Locator: DIMM1
>		Bank Locator: Bank 3b
>		Type: DDR
>		Type Detail: Synchronous
>Handle 0x001C
>	DMI type 17, 21 bytes.
>	Memory Device
>		Array Handle: 0x0017
>		Error Information Handle: Not Provided
>		Total Width: 72 bits
>		Data Width: 64 bits
>		Size: No Module Installed
>		Form Factor: DIMM
>		Set: 2
>		Locator: DIMM5
>		Bank Locator: Bank 2a
>		Type: DDR
>		Type Detail: Synchronous
>Handle 0x001D
>	DMI type 17, 21 bytes.
>	Memory Device
>		Array Handle: 0x0017
>		Error Information Handle: Not Provided
>		Total Width: 72 bits
>		Data Width: 64 bits
>		Size: No Module Installed
>		Form Factor: DIMM
>		Set: 2
>		Locator: DIMM7
>		Bank Locator: Bank 2b
>		Type: DDR
>		Type Detail: Synchronous
>Handle 0x001E
>	DMI type 17, 21 bytes.
>	Memory Device
>		Array Handle: 0x0017
>		Error Information Handle: Not Provided
>		Total Width: 72 bits
>		Data Width: 64 bits
>		Size: No Module Installed
>		Form Factor: DIMM
>		Set: 4
>		Locator: DIMM6
>		Bank Locator: Bank 4a
>		Type: DDR
>		Type Detail: Synchronous
>Handle 0x001F
>	DMI type 17, 21 bytes.
>	Memory Device
>		Array Handle: 0x0017
>		Error Information Handle: Not Provided
>		Total Width: 72 bits
>		Data Width: 64 bits
>		Size: No Module Installed
>		Form Factor: DIMM
>		Set: 4
>		Locator: DIMM8
>		Bank Locator: Bank 4b
>		Type: DDR
>		Type Detail: Synchronous
>Handle 0x0020
>	DMI type 19, 15 bytes.
>	Memory Array Mapped Address
>		Starting Address: 0x00000000000
>		Ending Address: 0x000FFFFFFFF
>		Range Size: 4 GB
>		Physical Array Handle: 0x0017
>		Partition Width: 0
>Handle 0x0021
>	DMI type 20, 19 bytes.
>	Memory Device Mapped Address
>		Starting Address: 0x00000000000
>		Ending Address: 0x0007FFFFFFF
>		Range Size: 2 GB
>		Physical Device Handle: 0x0018
>		Memory Array Mapped Address Handle: 0x0020
>		Partition Row Position: 1
>		Interleave Position: 1
>		Interleaved Data Depth: Unknown
>Handle 0x0022
>	DMI type 20, 19 bytes.
>	Memory Device Mapped Address
>		Starting Address: 0x00000000000
>		Ending Address: 0x0007FFFFFFF
>		Range Size: 2 GB
>		Physical Device Handle: 0x0019
>		Memory Array Mapped Address Handle: 0x0020
>		Partition Row Position: 2
>		Interleave Position: 2
>		Interleaved Data Depth: Unknown
>Handle 0x0023
>	DMI type 20, 19 bytes.
>	Memory Device Mapped Address
>		Starting Address: 0x00080000000
>		Ending Address: 0x000FFFFFFFF
>		Range Size: 2 GB
>		Physical Device Handle: 0x001A
>		Memory Array Mapped Address Handle: 0x0020
>		Partition Row Position: 1
>		Interleave Position: 1
>		Interleaved Data Depth: Unknown
>Handle 0x0024
>	DMI type 20, 19 bytes.
>	Memory Device Mapped Address
>		Starting Address: 0x00080000000
>		Ending Address: 0x000FFFFFFFF
>		Range Size: 2 GB
>		Physical Device Handle: 0x001B
>		Memory Array Mapped Address Handle: 0x0020
>		Partition Row Position: 2
>		Interleave Position: 2
>		Interleaved Data Depth: Unknown
>Handle 0x0025
>	DMI type 20, 19 bytes.
>	Memory Device Mapped Address
>		Starting Address: 0x00100000000
>		Ending Address: 0x001000003FF
>		Range Size: 1 kB
>		Physical Device Handle: 0x001C
>		Memory Array Mapped Address Handle: 0x0020
>		Partition Row Position: 1
>		Interleave Position: 1
>		Interleaved Data Depth: Unknown
>Handle 0x0026
>	DMI type 20, 19 bytes.
>	Memory Device Mapped Address
>		Starting Address: 0x00100000000
>		Ending Address: 0x001000003FF
>		Range Size: 1 kB
>		Physical Device Handle: 0x001D
>		Memory Array Mapped Address Handle: 0x0020
>		Partition Row Position: 2
>		Interleave Position: 2
>		Interleaved Data Depth: Unknown
>Handle 0x0027
>	DMI type 20, 19 bytes.
>	Memory Device Mapped Address
>		Starting Address: 0x00100000000
>		Ending Address: 0x001000003FF
>		Range Size: 1 kB
>		Physical Device Handle: 0x001E
>		Memory Array Mapped Address Handle: 0x0020
>		Partition Row Position: 1
>		Interleave Position: 1
>		Interleaved Data Depth: Unknown
>Handle 0x0028
>	DMI type 20, 19 bytes.
>	Memory Device Mapped Address
>		Starting Address: 0x00100000000
>		Ending Address: 0x001000003FF
>		Range Size: 1 kB
>		Physical Device Handle: 0x001F
>		Memory Array Mapped Address Handle: 0x0020
>		Partition Row Position: 2
>		Interleave Position: 2
>		Interleaved Data Depth: Unknown
>Handle 0x0029
>	DMI type 38, 18 bytes.
>	IPMI Device Information
>		Interface Type: KCS (Keyboard Control Style)
>		Specification Version: 1.5
>		I2C Slave Address: 0x10
>		NV Storage Device: Not Present
>		Base Address: 0x0000000000000C28 (I/O)
>		Register Spacing: 32-bit Boundaries
>Handle 0x002A
>	DMI type 127, 4 bytes.
>	End Of Table
>[root@elm3a155 ~]# cat /proc/scsi/scsi
>Attached devices:
>Host: scsi1 Channel: 00 Id: 01 Lun: 00
>  Vendor: IBM-ESXS Model: ST9146802SS      Rev: B007
>  Type:   Direct-Access                    ANSI SCSI revision: 05
>Host: scsi4 Channel: 00 Id: 00 Lun: 00
>  Vendor: M-Sys    Model: uDiskOnChip      Rev: 5.u6
>  Type:   Direct-Access                    ANSI SCSI revision: 02
>[root@elm3a155 ~]# cat /proc/scsi/mptsas/0
>ioc0: LSISAS1064, FwRev=01175100h, Ports=1, MaxQ=268
>[root@elm3a155 ~]# cat /proc/scsi/mptsas/1
>ioc1: LSISAS1064E, FwRev=01160000h, Ports=1, MaxQ=268
>[root@elm3a155 ~]# cat /proc/interrupts
>           CPU0       CPU1       CPU2       CPU3       
>  0:     133011     133830     133914     133939    IO-APIC-edge  timer
>  3:        385       2480       2922        304    IO-APIC-edge  serial
>  8:          0          0          0          0    IO-APIC-edge  rtc
>  9:          0          0          0          0   IO-APIC-level  acpi
> 14:          0          0          0          0    IO-APIC-edge  libata
> 15:          0          0          0          0    IO-APIC-edge  libata
> 50:       4093          0          0          0         PCI-MSI  eth0
>169:      15844      35852      65733      47697   IO-APIC-level  ioc1
>177:          9          8         13         11   IO-APIC-level  uhci_hcd
>185:          0          0          0          0   IO-APIC-level  uhci_hcd
>193:          0          0          0          0   IO-APIC-level  uhci_hcd
>201:         47         24         20         20   IO-APIC-level  ehci_hcd
>209:         30         27         31         33   IO-APIC-level  ioc0
>NMI:     535007     534873     534872     534871 
>LOC:     518605     519507     520745     519585 
>ERR:          0
>MIS:          0
>[root@elm3a155 ~]# cat /proc/ioports
>0000-001f : dma1
>0020-0021 : pic1
>0040-0043 : timer0
>0050-0053 : timer1
>0060-006f : keyboard
>0070-0077 : rtc
>0080-008f : dma page reg
>00a0-00a1 : pic2
>00c0-00df : dma2
>00f0-00ff : fpu
>0170-0177 : libata
>01f0-01f7 : libata
>02f8-02ff : serial
>03c0-03df : vga+
>03f8-03ff : serial
>0580-0583 : PM1a_EVT_BLK
>0584-0585 : PM1a_CNT_BLK
>0588-058b : PM_TMR
>0590-0595 : ACPI CPU throttle
>05a8-05af : GPE0_BLK
>0cf8-0cff : PCI conf1
>2200-221f : 0000:00:1d.0
>  2200-221f : uhci_hcd
>2600-261f : 0000:00:1d.1
>  2600-261f : uhci_hcd
>2800-281f : 0000:00:1d.2
>  2800-281f : uhci_hcd
>2a00-2a0f : 0000:00:1f.2
>  2a00-2a0f : libata
>3000-30ff : 0000:01:01.0
>4000-4fff : PCI Bus #02
>  4000-40ff : 0000:02:00.0
>5000-5fff : PCI Bus #07
>  5000-5fff : PCI Bus #08
>    5000-50ff : 0000:08:01.0
>6000-ffff : PCI Bus #0e
>[root@elm3a155 ~]# ls -l /sys/bus/scsi/drivers/sd
>total 0
>lrwxrwxrwx  1 root root 0 Jan 23 05:48 1:0:1:0 -> ../../../../devices/pci0000:00/0000:00:1c.0/0000:02:00.0/host1/target1:0:1/1:0:1:0
>lrwxrwxrwx  1 root root 0 Jan 23 05:48 4:0:0:0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host4/target4:0:0/4:0:0:0
>[root@elm3a155 ~]# mount
>dump/dev/mapper/VolGroup01-LogVol00 on / type ext3 (rw)
>none on /proc type proc (rw)
>none on /sys type sysfs (rw)
>none on /dev/pts type devpts (rw,gid=5,mode=620)
>usbfs on /proc/bus/usb type usbfs (rw)
>/dev/sda1 on /boot type ext3 (rw)
>none on /dev/shm type tmpfs (rw)
>none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
>sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
>[root@elm3a155 ~]# dumpe2fs -h /dev/mapper/VolGroup01-LogVol00
>dumpe2fs 1.35 (28-Feb-2004)
>Filesystem volume name:   <none>
>Last mounted on:          <not available>
>Filesystem UUID:          9c4b48a9-05d8-485b-a773-9e1e159d6109
>Filesystem magic number:  0xEF53
>Filesystem revision #:    1 (dynamic)
>Filesystem features:      has_journal ext_attr resize_inode dir_index filetype needs_recovery sparse_super large_file
>Default mount options:    (none)
>Filesystem state:         clean
>Errors behavior:          Continue
>Filesystem OS type:       Linux
>Inode count:              17645568
>Block count:              35282944
>Reserved block count:     1764147
>Free blocks:              30010854
>Free inodes:              15485255
>First block:              0
>Block size:               4096
>Fragment size:            4096
>Reserved GDT blocks:      1015
>Blocks per group:         32768
>Fragments per group:      32768
>Inodes per group:         16384
>Inode blocks per group:   512
>Filesystem created:       Wed Jan 23 08:42:34 2008
>Last mount time:          Wed Jan 23 05:39:27 2008
>Last write time:          Wed Jan 23 05:39:27 2008
>Mount count:              7
>Maximum mount count:      -1
>Last checked:             Wed Jan 23 08:42:34 2008
>Check interval:           0 (<none>)
>Reserved blocks uid:      0 (user root)
>Reserved blocks gid:      0 (group root)
>First inode:              11
>Inode size:               128
>Journal inode:            8
>Default directory hash:   tea
>Directory Hash Seed:      835b5a53-1194-4454-bd14-fbc84d7a3fc1
>Journal backup:           inode blocks
>[root@elm3a155 ~]# Assertion failure in journal_next_log_block() at fs/jbd/journal.c:576: "journal->j_free > 1"
>----------- [cut here ] --------- [please bite here ] ---------
>Kernel BUG at journal:576
>invalid operand: 0000 [1] SMP 
>CPU 1 
>Modules linked in: md5 ipv6 parport_pc lp parport autofs4 i2c_dev i2c_core sunrpc ds yenta_socket pcmcia_core joydev button battery ac usb_storage uhci_hcd ehci_hcd hw_random shpchp bnx2 dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod ata_piix libata mptscsih mptsas mptspi mptfc mptscsi mptbase sd_mod scsi_mod
>Pid: 565, comm: kjournald Not tainted 2.6.9-67.ELsmp
>RIP: 0010:[<ffffffffa009f2d2>] <ffffffffa009f2d2>{:jbd:journal_next_log_block+76}
>RSP: 0018:000001012afbbb88  EFLAGS: 00010212
>RAX: 0000000000000060 RBX: 00000100cff35800 RCX: ffffffff803e95e8
>RDX: ffffffff803e95e8 RSI: 0000000000000246 RDI: ffffffff803e95e0
>RBP: 0000000000000040 R08: ffffffff803e95e8 R09: 00000100cff35800
>R10: 0000000100000000 R11: 0000ffff80404840 R12: 00000100cff35824
>R13: 000001012afbbbe0 R14: 00000100cff35800 R15: 0000000000000015
>FS:  0000000000000000(0000) GS:ffffffff804f2e00(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000002a9556c000 CR3: 0000000005d38000 CR4: 00000000000006e0
>Process kjournald (pid: 565, threadinfo 000001012afba000, task 000001012bd427f0)
>Stack: 0000000000000058 000001004e1a9298 0000000000000040 0000010060fd2c90 
>       00000101247fca80 ffffffffa009ae06 00000f4400000000 00000100bafa70bc 
>       000000000000e780 00000100498c0710 
>Call Trace:<ffffffffa009ae06>{:jbd:journal_commit_transaction+1834} 
>       <ffffffff80136020>{autoremove_wake_function+0} <ffffffff80136020>{autoremove_wake_function+0} 
>       <ffffffffa009da5c>{:jbd:kjournald+250} <ffffffff80136020>{autoremove_wake_function+0} 
>       <ffffffff8030f32b>{__cond_resched+23} <ffffffff80136020>{autoremove_wake_function+0} 
>       <ffffffffa009d95c>{:jbd:commit_timeout+0} <ffffffff80110f47>{child_rip+8} 
>       <ffffffffa009d962>{:jbd:kjournald+0} <ffffffff80110f3f>{child_rip+0} 
>       
>
>Code: 0f 0b 91 13 0a a0 ff ff ff ff 40 02 48 8b ab 18 01 00 00 48 
>RIP <ffffffffa009f2d2>{:jbd:journal_next_log_block+76} RSP <000001012afbbb88>
> <0>Kernel panic - not syncing: Oops

Actions: View

Attachments on bug 183119: 143420 | 144402 | 291901 | 292185 | 292225 | 292398 | 292657 | 292682 | 293429 | 293746 | 293757 | 295041 | 295315 | 296621