Attachment 291954 Details for Bug 429079 – Automatic detection of the sound card did not work. This audio device will not be available on the system

Automatic detection of the sound card did not work. This audio device will not be available on the system

scsconfig.log (text/plain), 40.64 KB, created by Yuvaraj on 2008-01-17 05:52:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Yuvaraj

Created: 2008-01-17 05:52:13 UTC

Size: 40.64 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Sun Jan 13 10:33:28 IST 2008
>
>------- lspci --------
>00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
>00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
>00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
>00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
>00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
>00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
>00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
>00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
>00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
>04:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 01)
>
>------- lspci -vn --------
>00:00.0 0600: 8086:2770 (rev 02)
>	Subsystem: 8086:4c43
>	Flags: bus master, fast devsel, latency 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:02.0 0300: 8086:2772 (rev 02) (prog-if 00 [VGA])
>	Subsystem: 8086:4c43
>	Flags: bus master, fast devsel, latency 0, IRQ 20
>	Memory at 30100000 (32-bit, non-prefetchable) [size=512K]
>	I/O ports at 20e0 [size=8]
>	Memory at 20000000 (32-bit, prefetchable) [size=256M]
>	Memory at 30180000 (32-bit, non-prefetchable) [size=256K]
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [d0] Power Management version 2
>
>00:1b.0 0403: 8086:27d8 (rev 01)
>	Subsystem: 8086:0204
>	Flags: bus master, fast devsel, latency 0, IRQ 22
>	Memory at 301c0000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>	Capabilities: [70] Express Unknown type IRQ 0
>
>00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>	Capabilities: [90] Subsystem: 0000:0000
>	Capabilities: [a0] Power Management version 2
>
>00:1c.2 0604: 8086:27d4 (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>	Capabilities: [90] Subsystem: 0000:0000
>	Capabilities: [a0] Power Management version 2
>
>00:1c.3 0604: 8086:27d6 (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>	Capabilities: [90] Subsystem: 0000:0000
>	Capabilities: [a0] Power Management version 2
>
>00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 8086:4c43
>	Flags: bus master, medium devsel, latency 0, IRQ 19
>	I/O ports at 2080 [size=32]
>
>00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 8086:4c43
>	Flags: bus master, medium devsel, latency 0, IRQ 18
>	I/O ports at 2060 [size=32]
>
>00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 8086:4c43
>	Flags: bus master, medium devsel, latency 0, IRQ 17
>	I/O ports at 2040 [size=32]
>
>00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 8086:4c43
>	Flags: bus master, medium devsel, latency 0, IRQ 20
>	I/O ports at 2020 [size=32]
>
>00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI])
>	Subsystem: 8086:4c43
>	Flags: bus master, medium devsel, latency 0, IRQ 19
>	Memory at 301c4000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Debug port
>
>00:1e.0 0604: 8086:244e (rev e1) (prog-if 01 [Subtractive decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
>	I/O behind bridge: 00001000-00001fff
>	Memory behind bridge: 30000000-300fffff
>	Capabilities: [50] Subsystem: 8086:4c43
>
>00:1f.0 0601: 8086:27b8 (rev 01)
>	Subsystem: 8086:4c43
>	Flags: bus master, medium devsel, latency 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:1f.1 0101: 8086:27df (rev 01) (prog-if 8a [Master SecP PriP])
>	Subsystem: 8086:4c43
>	Flags: bus master, medium devsel, latency 0, IRQ 17
>	I/O ports at 01f0 [size=8]
>	I/O ports at 03f4 [size=1]
>	I/O ports at 0170 [size=8]
>	I/O ports at 0374 [size=1]
>	I/O ports at 20b0 [size=16]
>
>00:1f.2 0101: 8086:27c0 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: 8086:4c43
>	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
>	I/O ports at 20c8 [size=8]
>	I/O ports at 20ec [size=4]
>	I/O ports at 20c0 [size=8]
>	I/O ports at 20e8 [size=4]
>	I/O ports at 20a0 [size=16]
>	Capabilities: [70] Power Management version 2
>
>00:1f.3 0c05: 8086:27da (rev 01)
>	Subsystem: 8086:4c43
>	Flags: medium devsel, IRQ 18
>	I/O ports at 2000 [size=32]
>
>04:08.0 0200: 8086:1094 (rev 01)
>	Subsystem: 8086:0001
>	Flags: bus master, medium devsel, latency 32, IRQ 21
>	Memory at 30000000 (32-bit, non-prefetchable) [size=4K]
>	I/O ports at 1000 [size=64]
>	Capabilities: [dc] Power Management version 2
>
>------- lsmod --------
>Module                  Size  Used by
>vfat                   13249  0 
>fat                    45277  1 vfat
>i915                   23745  3 
>drm                    67028  4 i915
>nf_conntrack_ftp       10977  0 
>nf_conntrack_ipv6      18769  12 
>ip6t_ipv6header         6209  2 
>ip6t_REJECT             8257  2 
>ip6table_filter         6337  1 
>ip6_tables             15109  2 ip6t_ipv6header,ip6table_filter
>nf_conntrack_ipv4      11717  12 
>ipt_REJECT              7617  2 
>iptable_filter          6465  1 
>ip_tables              14213  1 iptable_filter
>bridge                 46809  0 
>rfcomm                 36825  0 
>l2cap                  25537  9 rfcomm
>bluetooth              49316  4 rfcomm,l2cap
>autofs4                20421  2 
>sunrpc                140765  1 
>xt_state                6081  24 
>nf_conntrack           51977  4 nf_conntrack_ftp,nf_conntrack_ipv6,nf_conntrack_ipv4,xt_state
>nfnetlink               8281  3 nf_conntrack_ipv6,nf_conntrack_ipv4,nf_conntrack
>xt_tcpudp               6977  28 
>x_tables               14277  7 ip6t_ipv6header,ip6t_REJECT,ip6_tables,ipt_REJECT,ip_tables,xt_state,xt_tcpudp
>cpufreq_ondemand       10317  2 
>acpi_cpufreq           12365  0 
>loop                   16581  0 
>dm_multipath           18249  0 
>ipv6                  245989  16 nf_conntrack_ipv6,ip6t_REJECT
>snd_hda_intel         274657  4 
>snd_seq_dummy           6725  0 
>snd_seq_oss            29889  0 
>snd_seq_midi_event      9793  1 snd_seq_oss
>snd_seq                44849  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_seq_device         10061  3 snd_seq_dummy,snd_seq_oss,snd_seq
>snd_pcm_oss            37569  0 
>snd_mixer_oss          16705  2 snd_pcm_oss
>snd_pcm                63685  3 snd_hda_intel,snd_pcm_oss
>snd_timer              20549  2 snd_seq,snd_pcm
>snd_page_alloc         11337  2 snd_hda_intel,snd_pcm
>snd_hwdep              10309  1 snd_hda_intel
>snd                    43461  14 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
>soundcore               9633  2 snd
>button                 10321  0 
>iTCO_wdt               13797  0 
>parport_pc             26981  0 
>e100                   33997  0 
>i2c_i801               12113  0 
>iTCO_vendor_support     7109  1 iTCO_wdt
>parport                32393  1 parport_pc
>i2c_core               21825  1 i2c_i801
>mii                     8385  1 e100
>sg                     31965  0 
>sr_mod                 17509  0 
>cdrom                  33889  1 sr_mod
>dm_snapshot            17765  0 
>dm_zero                 5825  0 
>dm_mirror              21569  0 
>dm_mod                 46209  9 dm_multipath,dm_snapshot,dm_zero,dm_mirror
>ata_piix               16709  2 
>ata_generic             8901  0 
>libata                 99633  2 ata_piix,ata_generic
>sd_mod                 27329  3 
>scsi_mod              119757  4 sg,sr_mod,libata,sd_mod
>ext3                  110665  2 
>jbd                    52457  1 ext3
>mbcache                10177  1 ext3
>uhci_hcd               23633  0 
>ohci_hcd               21445  0 
>ehci_hcd               31693  0 
>
>------- /etc/modprobe.conf --------
>alias eth0 e100
>alias scsi_hostadapter libata
>alias scsi_hostadapter1 ata_piix
>alias snd-card-0 snd-hda-intel
>options snd-card-0 index=0
>options snd-hda-intel index=0
>
>------- /etc/asound.conf --------
>#Generated by system-config-soundcard
>#If you edit this file, don't run system-config-soundcard,
>#all your changes here could be lost.
>#SWCONF
>#DEV 0
>defaults.pcm.card 0
>defaults.pcm.device 0
>defaults.ctl.card 0
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
>  Subdevices: 0/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>Simple mixer control 'Master',0
>  Capabilities: pvolume pswitch pswitch-joined
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 65536
>  Mono:
>  Front Left: Playback 65536 [100%] [on]
>  Front Right: Playback 65536 [100%] [on]
>Simple mixer control 'Capture',0
>  Capabilities: cvolume cswitch cswitch-joined
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 65536
>  Front Left: Capture 32768 [50%] [on]
>  Front Right: Capture 32768 [50%] [on]
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 23 06:09:18 2007 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.15-1.fc8
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.15-1.fc8
>
>------- /proc/asound/modules --------
> 0 snd_hda_intel
>
>------- /proc/asound/pcm --------
>00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: i2c-i801
>desc: "Intel Corporation 82801G (ICH7 Family) SMBus Controller"
>vendorId: 8086
>deviceId: 27da
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  3
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: intel-rng
>desc: "Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge"
>vendorId: 8086
>deviceId: 27b8
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801 PCI Bridge"
>vendorId: 8086
>deviceId: 244e
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1e
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 4"
>vendorId: 8086
>deviceId: 27d6
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1c
>pcifn:  3
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 3"
>vendorId: 8086
>deviceId: 27d4
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1c
>pcifn:  2
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 1"
>vendorId: 8086
>deviceId: 27d0
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1c
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82945G/GZ/P/PL Memory Controller Hub"
>vendorId: 8086
>deviceId: 2770
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.23.1-42.fc8 ehci_hcd EHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.23.1-42.fc8 ehci_hcd
>usbprod: EHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.23.1-42.fc8 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.23.1-42.fc8 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.23.1-42.fc8 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.23.1-42.fc8 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.23.1-42.fc8 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 4
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.23.1-42.fc8 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.23.1-42.fc8 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 5
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.23.1-42.fc8 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0003"
>deviceId: PNP0003
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0103"
>deviceId: PNP0103
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0303"
>deviceId: PNP0303
>compat: PNP030b
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: parport_pc
>desc: "PNP0401"
>deviceId: PNP0401
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0501"
>deviceId: PNP0501
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a03"
>deviceId: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0f03"
>deviceId: PNP0f03
>compat: PNP0f13
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (FF)"
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Sleep Button (CM)"
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: e100
>desc: "Intel Corporation PRO/100 VE Network Connection"
>network.hwaddr: 00:19:d1:23:58:1a
>vendorId: 8086
>deviceId: 1094
>subVendorId: 8086
>subDeviceId: 0001
>pciType: 1
>pcidom:    0
>pcibus:  4
>pcidev:  8
>pcifn:  0
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "ImPS/2 Logitech Wheel Mouse"
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "Macintosh mouse button emulation"
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-hda-intel
>desc: "Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller"
>vendorId: 8086
>deviceId: 27d8
>subVendorId: 8086
>subDeviceId: 0204
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1b
>pcifn:  0
>-
>class: CDROM
>bus: SCSI
>detached: 0
>device: scd0
>desc: "SONY DVD RW AW-G170A"
>host: 0
>id: 0
>channel: 0
>lun: 0
>-
>class: VIDEO
>bus: PCI
>detached: 0
>driver: intelfb
>desc: "Intel Corporation 82945G/GZ Integrated Graphics Controller"
>video.xdriver: intel
>vendorId: 8086
>deviceId: 2772
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  2
>pcifn:  0
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sda
>desc: "ATA ST3160211AS"
>host: 3
>id: 1
>channel: 0
>lun: 0
>-
>class: KEYBOARD
>bus: PSAUX
>detached: 0
>desc: "AT Translated Set 2 keyboard"
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ehci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller"
>vendorId: 8086
>deviceId: 27cc
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  7
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4"
>vendorId: 8086
>deviceId: 27cb
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  3
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3"
>vendorId: 8086
>deviceId: 27ca
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  2
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2"
>vendorId: 8086
>deviceId: 27c9
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1"
>vendorId: 8086
>deviceId: 27c8
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  0
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: ata_piix
>desc: "Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller"
>vendorId: 8086
>deviceId: 27c0
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  2
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: ata_piix
>desc: "Intel Corporation 82801G (ICH7 Family) IDE Controller"
>vendorId: 8086
>deviceId: 27df
>subVendorId: 8086
>subDeviceId: 4c43
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  1
>
>------- dmesg --------
>Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f546000 (usable)
> BIOS-e820: 000000001f546000 - 000000001f54e000 (reserved)
> BIOS-e820: 000000001f54e000 - 000000001f5d8000 (usable)
> BIOS-e820: 000000001f5d8000 - 000000001f5dc000 (reserved)
> BIOS-e820: 000000001f5dc000 - 000000001f665000 (usable)
> BIOS-e820: 000000001f665000 - 000000001f6e9000 (ACPI NVS)
> BIOS-e820: 000000001f6e9000 - 000000001f6ed000 (usable)
> BIOS-e820: 000000001f6ed000 - 000000001f6ff000 (ACPI data)
> BIOS-e820: 000000001f6ff000 - 000000001f700000 (usable)
> BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>503MB LOWMEM available.
>found SMP MP-table at 000fe200
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 128768) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   128768
>  HighMem    128768 ->   128768
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   128768
>On node 0 totalpages: 128768
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 974 pages used for memmap
>  Normal zone: 123698 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FE020, 0014 (r0 INTEL )
>ACPI: RSDT 1F6FD038, 0050 (r1 INTEL  D945GCL         C       1000013)
>ACPI: FACP 1F6FC000, 0074 (r1 INTEL  D945GCL         C MSFT  1000013)
>ACPI: DSDT 1F6F7000, 4250 (r1 INTEL  D945GCL         C MSFT  1000013)
>ACPI: FACS 1F6AB000, 0040
>ACPI: APIC 1F6F6000, 0078 (r1 INTEL  D945GCL         C MSFT  1000013)
>ACPI: WDDT 1F6F5000, 0040 (r1 INTEL  D945GCL         C MSFT  1000013)
>ACPI: MCFG 1F6F4000, 003C (r1 INTEL  D945GCL         C MSFT  1000013)
>ACPI: ASF! 1F6F3000, 00A6 (r32 INTEL  D945GCL         C MSFT  1000013)
>ACPI: HPET 1F6F2000, 0038 (r1 INTEL  D945GCL         C MSFT  1000013)
>ACPI: SSDT 1F6F1000, 01BC (r1 INTEL     CpuPm        C MSFT  1000013)
>ACPI: SSDT 1F6F0000, 0175 (r1 INTEL   Cpu0Ist        C MSFT  1000013)
>ACPI: SSDT 1F6EF000, 0175 (r1 INTEL   Cpu1Ist        C MSFT  1000013)
>ACPI: SSDT 1F6EE000, 0175 (r1 INTEL   Cpu2Ist        C MSFT  1000013)
>ACPI: SSDT 1F6ED000, 0175 (r1 INTEL   Cpu3Ist        C MSFT  1000013)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>swsusp: Registered nosave memory region: 000000001f546000 - 000000001f54e000
>swsusp: Registered nosave memory region: 000000001f5d8000 - 000000001f5dc000
>swsusp: Registered nosave memory region: 000000001f665000 - 000000001f6e9000
>swsusp: Registered nosave memory region: 000000001f6ed000 - 000000001f6ff000
>Built 1 zonelists in Zone order.  Total pages: 127762
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1796.696 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 501104k/515072k available (2183k kernel code, 12528k reserved, 1117k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
>    lowmem  : 0xc0000000 - 0xdf700000   ( 503 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0621f7d - 0xc0739544   (1117 kB)
>      .text : 0xc0400000 - 0xc0621f7d   (2183 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3595.56 BogoMIPS (lpj=1797780)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          4300  @ 1.80GHz stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3593.25 BogoMIPS (lpj=1796628)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          4300  @ 1.80GHz stepping 02
>Total of 2 processors activated (7188.81 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:54:32  Date: 01/12/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
>pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>pnp: 00:06: ioport range 0x500-0x53f has been reserved
>pnp: 00:06: ioport range 0x400-0x47f has been reserved
>pnp: 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: 30000000-300fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3577k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1200174871.531:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 230FF4508E76ABC1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Firmware left 0000:04:08.0 e100 interrupts enabled, disabling
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 945G Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0x20000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 8:987:954
>  hash matches device 0000:04:08.0
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 849k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0x301c4000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00002080
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x00002060
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 17, io base 0x00002040
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 20, io base 0x00002020
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000120b0 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000120b8 irq 15
>ata1.00: ATAPI: SONY    DVD RW AW-G170A, 1.62, max UDMA/66
>ata1.00: configured for UDMA/66
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: CD-ROM            SONY     DVD RW AW-G170A  1.62 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x000120c8 ctl 0x000120ee bmdma 0x000120a0 irq 18
>ata4: SATA max UDMA/133 cmd 0x000120c0 ctl 0x000120ea bmdma 0x000120a8 irq 18
>ata4.01: ATA-7: ST3160211AS, 3.AAE, max UDMA/133
>ata4.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.01: configured for UDMA/133
>scsi 3:0:1:0: Direct-Access     ATA      ST3160211AS      3.AA PQ: 0 ANSI: 5
>sd 3:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 3:0:1:0: [sda] Write Protect is off
>sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 3:0:1:0: [sda] Write Protect is off
>sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
>sd 3:0:1:0: [sda] Attached SCSI disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1200174878.887:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  8 users, 11 roles, 2317 types, 112 bools, 1 sens, 1024 cats
>security:  67 classes, 207815 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1200174879.233:3): policy loaded auid=4294967295
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sd 3:0:1:0: Attached scsi generic sg1 type 0
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 21
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [SLPB]
>e100: eth0: e100_probe: addr 0x30000000, irq 21, MAC addr 00:19:D1:23:58:1A
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda9, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1015800k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:1015800k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>audit(1200174901.692:4): audit_pid=1879 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: no IPv6 routers present
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
>

Actions: View

Attachments on bug 429079: 291954 | 291955