Attachment 291983 Details for Bug 429106 – scs config file on my system..

scs config file on my system..

scsconfig.log (text/plain), 45.17 KB, created by Chandra on 2008-01-17 11:37:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chandra

Created: 2008-01-17 11:37:42 UTC

Size: 45.17 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Thu Jan 17 16:45:18 IST 2008
>
>------- lspci --------
>00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
>00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
>00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
>00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37
>00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
>00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
>00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
>00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
>00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
>00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
>00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
>00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
>00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
>00:14.0 SMBus: ATI Technologies Inc SB600 SMBus (rev 13)
>00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
>00:14.2 Audio device: ATI Technologies Inc SB600 Azalia
>00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
>00:14.4 PCI bridge: ATI Technologies Inc SB600 PCI to PCI Bridge
>01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
>02:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01)
>08:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
>08:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
>08:01.2 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
>08:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
>08:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>
>------- lspci -vn --------
>00:00.0 0600: 1002:5a31 (rev 01)
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 64
>
>00:01.0 0604: 1002:5a3f
>	Flags: bus master, 66MHz, medium devsel, latency 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 00007000-00007fff
>	Memory behind bridge: f8800000-f88fffff
>	Prefetchable memory behind bridge: 9ff00000-afefffff
>	Capabilities: [b0] #0d [0000]
>
>00:04.0 0604: 1002:5a36
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	Memory behind bridge: f8900000-f89fffff
>	Capabilities: [50] Power Management version 3
>	Capabilities: [58] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [b8] HyperTransport: MSI Mapping
>
>00:05.0 0604: 1002:5a37
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
>	I/O behind bridge: 00008000-00009fff
>	Memory behind bridge: f8a00000-fc9fffff
>	Prefetchable memory behind bridge: 00000000aff00000-00000000cfe00000
>	Capabilities: [50] Power Management version 3
>	Capabilities: [58] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [b8] HyperTransport: MSI Mapping
>
>00:06.0 0604: 1002:5a38
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
>	Capabilities: [50] Power Management version 3
>	Capabilities: [58] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [b8] HyperTransport: MSI Mapping
>
>00:07.0 0604: 1002:5a39
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
>	Capabilities: [50] Power Management version 3
>	Capabilities: [58] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [b8] HyperTransport: MSI Mapping
>
>00:12.0 0106: 1002:4380 (prog-if 01)
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 58
>	I/O ports at e800 [size=8]
>	I/O ports at e400 [size=4]
>	I/O ports at e000 [size=8]
>	I/O ports at dc00 [size=4]
>	I/O ports at d800 [size=16]
>	Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [60] Power Management version 2
>
>00:13.0 0c03: 1002:4387 (prog-if 10)
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 217
>	Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
>
>00:13.1 0c03: 1002:4388 (prog-if 10)
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 225
>	Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
>
>00:13.2 0c03: 1002:4389 (prog-if 10)
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 233
>	Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
>
>00:13.3 0c03: 1002:438a (prog-if 10)
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 225
>	Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
>
>00:13.4 0c03: 1002:438b (prog-if 10)
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 233
>	Memory at febfa000 (32-bit, non-prefetchable) [size=4K]
>
>00:13.5 0c03: 1002:4386 (prog-if 20)
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 50
>	Memory at febff800 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [c0] Power Management version 2
>	Capabilities: [e4] Debug port
>
>00:14.0 0c05: 1002:4385 (rev 13)
>	Subsystem: 1043:1627
>	Flags: 66MHz, medium devsel
>	I/O ports at 0b00 [size=16]
>
>00:14.1 0101: 1002:438c (prog-if 82)
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 217
>	I/O ports at <unassigned>
>	I/O ports at <unassigned>
>	I/O ports at <unassigned>
>	I/O ports at <unassigned>
>	I/O ports at ff00 [size=16]
>
>00:14.2 0403: 1002:4383
>	Subsystem: 1043:1339
>	Flags: bus master, slow devsel, latency 64, IRQ 217
>	Memory at febf4000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>
>00:14.3 0601: 1002:438d
>	Subsystem: 1043:1627
>	Flags: bus master, 66MHz, medium devsel, latency 0
>
>00:14.4 0604: 1002:4384 (prog-if 01)
>	Flags: bus master, 66MHz, medium devsel, latency 64
>	Bus: primary=00, secondary=08, subordinate=0c, sec-latency=64
>	I/O behind bridge: 0000a000-0000bfff
>	Memory behind bridge: fca00000-feafffff
>	Prefetchable memory behind bridge: cff00000-dfefffff
>
>01:05.0 0300: 1002:5a62
>	Subsystem: 1043:1402
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 5
>	Memory at a0000000 (32-bit, prefetchable) [size=128M]
>	I/O ports at 7800 [size=256]
>	Memory at f88f0000 (32-bit, non-prefetchable) [size=64K]
>	Expansion ROM at f88c0000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>
>02:00.0 0200: 168c:001c (rev 01)
>	Subsystem: 168c:3065
>	Flags: bus master, fast devsel, latency 0, IRQ 11
>	Memory at f89f0000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [40] Power Management version 2
>	Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>	Capabilities: [60] Express Legacy Endpoint IRQ 0
>	Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
>
>08:01.0 0607: 1180:0476 (rev b3)
>	Subsystem: 1043:1407
>	Flags: bus master, medium devsel, latency 168, IRQ 169
>	Memory at fca00000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176
>	Memory window 0: d0000000-d1fff000 (prefetchable)
>	Memory window 1: 20000000-21fff000
>	I/O window 0: 0000a000-0000a0ff
>	I/O window 1: 0000a400-0000a4ff
>	16-bit legacy interface ports at 0001
>
>08:01.1 0c00: 1180:0552 (rev 08) (prog-if 10)
>	Subsystem: 1043:1407
>	Flags: bus master, medium devsel, latency 64, IRQ 3
>	Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [dc] Power Management version 2
>
>08:01.2 0805: 1180:0822 (rev 17)
>	Subsystem: 1043:1407
>	Flags: bus master, medium devsel, latency 64, IRQ 74
>	Memory at feaff400 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>
>08:01.3 0880: 1180:0592 (rev 08)
>	Subsystem: 1043:1407
>	Flags: medium devsel, IRQ 5
>	Memory at feaff000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>
>08:07.0 0200: 10ec:8139 (rev 10)
>	Subsystem: 1043:1045
>	Flags: bus master, medium devsel, latency 64, IRQ 66
>	I/O ports at b800 [size=256]
>	Memory at feafec00 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>
>------- lsmod --------
>Module                  Size  Used by
>ieee80211              33417  0 
>ieee80211_crypt        10049  1 ieee80211
>autofs4                23749  2 
>hidp                   23105  2 
>rfcomm                 42457  0 
>l2cap                  29505  10 hidp,rfcomm
>sunrpc                142973  1 
>ip6t_REJECT             9409  1 
>xt_tcpudp               7105  6 
>ip6table_filter         6849  1 
>ip6_tables             18181  1 ip6table_filter
>x_tables               17349  3 ip6t_REJECT,xt_tcpudp,ip6_tables
>dm_mirror              29713  0 
>dm_mod                 56665  1 dm_mirror
>video                  19269  0 
>sbs                    18533  0 
>i2c_ec                  9025  1 sbs
>i2c_core               23745  1 i2c_ec
>button                 10705  0 
>battery                13637  0 
>asus_acpi              19289  0 
>ac                      9157  0 
>ipv6                  251137  17 ip6t_REJECT
>parport_pc             29157  0 
>lp                     15849  0 
>parport                37513  2 parport_pc,lp
>joydev                 13185  0 
>sg                     35933  0 
>snd_hda_intel          21333  4 
>snd_hda_codec         144321  1 snd_hda_intel
>snd_seq_dummy           7877  0 
>snd_seq_oss            32705  0 
>snd_seq_midi_event     11073  1 snd_seq_oss
>snd_seq                49841  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_seq_device         11853  3 snd_seq_dummy,snd_seq_oss,snd_seq
>snd_pcm_oss            42849  0 
>snd_mixer_oss          19137  1 snd_pcm_oss
>snd_pcm                71621  4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
>sdhci                  21337  0 
>mmc_core               27457  1 sdhci
>8139cp                 26305  0 
>8139too                28737  0 
>snd_timer              24901  3 snd_seq,snd_pcm
>snd                    51909  15 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>mii                     9409  2 8139cp,8139too
>soundcore              13217  1 snd
>snd_page_alloc         13641  2 snd_hda_intel,snd_pcm
>pcspkr                  7105  0 
>ide_cd                 40033  0 
>cdrom                  36705  1 ide_cd
>serio_raw              10693  0 
>hci_usb                20317  0 
>bluetooth              53925  6 hidp,rfcomm,l2cap,hci_usb
>ahci                   21573  4 
>libata                 96857  1 ahci
>sd_mod                 22977  5 
>scsi_mod              130637  4 sg,ahci,libata,sd_mod
>ext3                  123081  3 
>jbd                    56553  1 ext3
>ehci_hcd               32845  0 
>ohci_hcd               23261  0 
>uhci_hcd               25421  0 
>
>------- /etc/modprobe.conf --------
>alias eth0 8139too
>alias scsi_hostadapter ahci
>alias snd-card-0 snd-hda-intel
>options snd-card-0 index=0  
>options snd-hda-intel index=0  
>remove snd-hda-intel { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-hda-intel
>
>------- /etc/asound.conf --------
>
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 0: SB [HDA ATI SB], device 0: HDA Generic [HDA Generic]
>  Subdevices: 0/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>Simple mixer control 'Master',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 64
>  Mono:
>  Front Left: Playback 48 [75%]
>  Front Right: Playback 48 [75%]
>Simple mixer control 'PCM',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 191 [75%]
>  Front Right: Playback 191 [75%]
>Simple mixer control 'Capture',0
>  Capabilities: cvolume cswitch
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 31
>  Front Left: Capture 22 [71%] [on]
>  Front Right: Capture 22 [71%] [on]
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.12-3.el5
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.12-3.fc6
>
>------- /proc/asound/modules --------
> 0 snd_hda_intel
>
>------- /proc/asound/pcm --------
>00-00: HDA Generic : HDA Generic : playback 1 : capture 1
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter"
>vendorId: 1180
>deviceId: 0592
>subVendorId: 1043
>subDeviceId: 1407
>pciType: 1
>pcidom:    0
>pcibus:  8
>pcidev:  1
>pcifn:  3
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: sdhci
>desc: "Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter"
>vendorId: 1180
>deviceId: 0822
>subVendorId: 1043
>subDeviceId: 1407
>pciType: 1
>pcidom:    0
>pcibus:  8
>pcidev:  1
>pcifn:  2
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc SB600 PCI to PCI Bridge"
>vendorId: 1002
>deviceId: 4384
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  4
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc SB600 PCI to LPC Bridge"
>vendorId: 1002
>deviceId: 438d
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  3
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc SB600 SMBus"
>vendorId: 1002
>deviceId: 4385
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc RS480 PCI Bridge"
>vendorId: 1002
>deviceId: 5a39
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  7
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc RS480 PCI Bridge"
>vendorId: 1002
>deviceId: 5a38
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  6
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc Unknown device 5a37"
>vendorId: 1002
>deviceId: 5a37
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  5
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc RS480 PCI Bridge"
>vendorId: 1002
>deviceId: 5a36
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  4
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc RS480 PCI Bridge"
>vendorId: 1002
>deviceId: 5a3f
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  1
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc Unknown device 5a31"
>vendorId: 1002
>deviceId: 5a31
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.18-8.el5 ehci_hcd EHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 6
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.18-8.el5 ehci_hcd
>usbprod: EHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.18-8.el5 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.18-8.el5 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.18-8.el5 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.18-8.el5 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.18-8.el5 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.18-8.el5 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.18-8.el5 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 4
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.18-8.el5 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.18-8.el5 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 5
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.18-8.el5 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>driver: pcspkr
>desc: "PC Speaker"
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0303"
>deviceId: PNP0303
>compat: PNP030b
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a03"
>deviceId: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c01"
>deviceId: PNP0c01
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "SYN0a04"
>deviceId: SYN0a04
>compat: SYN0a00,SYN0002,PNP0f03,PNP0f13,PNP0f12
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Syntek USB2.0"
>usbclass: 255
>usbsubclass: 255
>usbprotocol: 255
>usbbus: 6
>usblevel: 1
>usbport: 8
>usbdev: 3
>vendorId: 174f
>deviceId: a821
>usbmfr: Syntek
>usbprod: USB2.0
>-
>class: OTHER
>bus: USB
>detached: 0
>driver: hci_usb
>desc: "Unknown USB device 0xb05:0x1712"
>usbclass: 224
>usbsubclass: 1
>usbprotocol: 1
>usbbus: 2
>usblevel: 1
>usbport: 0
>usbdev: 3
>vendorId: 0b05
>deviceId: 1712
>-
>class: OTHER
>bus: USB
>detached: 0
>driver: hci_usb
>desc: "Unknown USB device 0xb05:0x1712"
>usbclass: 254
>usbsubclass: 1
>usbprotocol: 0
>usbbus: 2
>usblevel: 1
>usbport: 0
>usbdev: 3
>vendorId: 0b05
>deviceId: 1712
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: 8139too
>desc: "Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+"
>network.hwaddr: 00:1a:92:d6:68:0d
>vendorId: 10ec
>deviceId: 8139
>subVendorId: 1043
>subDeviceId: 1045
>pciType: 1
>pcidom:    0
>pcibus:  8
>pcidev:  7
>pcifn:  0
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: synaptics
>desc: "SynPS/2 Synaptics TouchPad"
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-hda-intel
>desc: "ATI Technologies Inc SB600 Azalia"
>vendorId: 1002
>deviceId: 4383
>subVendorId: 1043
>subDeviceId: 1339
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  2
>-
>class: CDROM
>bus: IDE
>detached: 0
>device: hdb
>desc: "TSSTcorpCD/DVDW TS-L632D"
>-
>class: VIDEO
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc RC410 [Radeon Xpress 200M]"
>video.xdriver: radeon
>vendorId: 1002
>deviceId: 5a62
>subVendorId: 1043
>subDeviceId: 1402
>pciType: 1
>pcidom:    0
>pcibus:  1
>pcidev:  5
>pcifn:  0
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sda
>desc: "ATA WDC WD1200BEVS-0"
>host: 0
>id: 0
>channel: 0
>lun: 0
>-
>class: KEYBOARD
>bus: PSAUX
>detached: 0
>desc: "AT Translated Set 2 keyboard"
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ehci-hcd
>desc: "ATI Technologies Inc SB600 USB Controller (EHCI)"
>vendorId: 1002
>deviceId: 4386
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  5
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "ATI Technologies Inc SB600 USB (OHCI4)"
>vendorId: 1002
>deviceId: 438b
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  4
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "ATI Technologies Inc SB600 USB (OHCI3)"
>vendorId: 1002
>deviceId: 438a
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  3
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "ATI Technologies Inc SB600 USB (OHCI2)"
>vendorId: 1002
>deviceId: 4389
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  2
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "ATI Technologies Inc SB600 USB (OHCI1)"
>vendorId: 1002
>deviceId: 4388
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "ATI Technologies Inc SB600 USB (OHCI0)"
>vendorId: 1002
>deviceId: 4387
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  0
>-
>class: SOCKET
>bus: PCI
>detached: 0
>driver: yenta_socket
>desc: "Ricoh Co Ltd RL5c476 II"
>vendorId: 1180
>deviceId: 0476
>subVendorId: 1043
>subDeviceId: 1407
>pciType: 1
>pcidom:    0
>pcibus:  8
>pcidev:  1
>pcifn:  0
>-
>class: FIREWIRE
>bus: PCI
>detached: 0
>desc: "Ricoh Co Ltd R5C552 IEEE 1394 Controller"
>vendorId: 1180
>deviceId: 0552
>subVendorId: 1043
>subDeviceId: 1407
>pciType: 1
>pcidom:    0
>pcibus:  8
>pcidev:  1
>pcifn:  1
>-
>class: IDE
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc SB600 IDE"
>vendorId: 1002
>deviceId: 438c
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  1
>-
>class: SATA
>bus: PCI
>detached: 0
>driver: ahci
>desc: "ATI Technologies Inc SB600 Non-Raid-5 SATA"
>vendorId: 1002
>deviceId: 4380
>subVendorId: 1043
>subDeviceId: 1627
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 12
>pcifn:  0
>
>------- dmesg --------
>Linux version 2.6.18-8.el5 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:21 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bf98000 (usable)
> BIOS-e820: 000000001bf98000 - 000000001bfa0000 (ACPI NVS)
> BIOS-e820: 000000001bfa0000 - 000000001bfae000 (ACPI data)
> BIOS-e820: 000000001bfae000 - 000000001bff0000 (ACPI NVS)
> BIOS-e820: 000000001bff0000 - 000000001c000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>447MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 114584
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 110488 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000f7f70
>ACPI: XSDT (v001 HCLINF DESKTOPS 0x04000711 MSFT 0x00000097) @ 0x1bfa0100
>ACPI: FADT (v003 A.M.I  OEMFACP  0x04000711 MSFT 0x00000097) @ 0x1bfa0290
>ACPI: MADT (v001 A.M.I  OEMAPIC  0x04000711 MSFT 0x00000097) @ 0x1bfa0390
>ACPI: MCFG (v001 A.M.I  OEMMCFG  0x04000711 MSFT 0x00000097) @ 0x1bfa03f0
>ACPI: SLIC (v001 HCLINF DESKTOPS 0x04000711 MSFT 0x00000097) @ 0x1bfa0430
>ACPI: BOOT (v001 A.M.I  OEMBOOT  0x04000711 MSFT 0x00000097) @ 0x1bfa0600
>ACPI: OEMB (v001 A.M.I  AMI_OEM  0x04000711 MSFT 0x00000097) @ 0x1bfae040
>ACPI: DSDT (v001  T12R0 T12R0000 0x00000000 INTL 0x20051117) @ 0x00000000
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 1c000000:e2e00000)
>Detected 1729.193 MHz processor.
>Built 1 zonelists.  Total pages: 114584
>Kernel command line: ro root=LABEL=/ rhgb quiet crashkernel=128M@16M
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0737000 soft=c0717000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 317144k/458336k available (2043k kernel code, 140568k reserved, 846k data, 232k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3461.13 BogoMIPS (lpj=1730568)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00000940 0000c189 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel Genuine Intel(R) CPU           T2080  @ 1.73GHz stepping 0c
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0738000 soft=c0718000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3457.86 BogoMIPS (lpj=1728931)
>CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00000940 0000c189 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2080  @ 1.73GHz stepping 0c
>Total of 2 processors activated (6918.99 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=138
>checking if image is initramfs... it is
>Freeing initrd memory: 1488k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
>ACPI: Embedded Controller [EC0] (gpe 17) interrupt mode.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 12) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:09: ioport range 0x25c-0x25c has been reserved
>pnp: 00:09: ioport range 0x25d-0x25d has been reserved
>pnp: 00:09: ioport range 0x25e-0x25e has been reserved
>pnp: 00:09: ioport range 0x25f-0x25f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 7000-7fff
>  MEM window: f8800000-f88fffff
>  PREFETCH window: 9ff00000-afefffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: f8900000-f89fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: 8000-9fff
>  MEM window: f8a00000-fc9fffff
>  PREFETCH window: aff00000-cfefffff
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 9, cardbus bridge: 0000:08:01.0
>  IO window: 0000a000-0000a0ff
>  IO window: 0000a400-0000a4ff
>  PREFETCH window: d0000000-d1ffffff
>  MEM window: 20000000-21ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: a000-bfff
>  MEM window: fca00000-feafffff
>  PREFETCH window: cff00000-dfefffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 21 (level, low) -> IRQ 169
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>Simple Boot Flag at 0xff set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1200545698.141:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 86B4033B99649BB9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>pcie_portdrv_probe->Dev[5a36:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie02]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>pcie_portdrv_probe->Dev[5a39:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (32 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 217
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:DMA
>ATIIXP: simplex device: DMA disabled
>ide1: ATIIXP Bus-Master DMA disabled (BIOS)
>Probing IDE interface ide0...
>hdb: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:08:01.0 [1043:1407]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 169
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
>pcmcia: parent PCI bridge Memory window: 0xfca00000 - 0xfeafffff
>pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xdfefffff
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFC) is beyond end of object [20060707]
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PSS] (Node dbc25838), AE_AML_PACKAGE_LIMIT
>ACPI Exception (acpi_processor-0235): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20060707]
>ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFC) is beyond end of object [20060707]
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PSS] (Node dbc25680), AE_AML_PACKAGE_LIMIT
>ACPI Exception (acpi_processor-0235): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20060707]
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 383k
>Time: tsc clocksource has been installed.
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 217
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 217, io mem 0xfebfe000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 225
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 225, io mem 0xfebfd000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 233
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.2: irq 233, io mem 0xfebfc000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 225
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.3: irq 225, io mem 0xfebfb000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 233
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.4: irq 233, io mem 0xfebfa000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-1: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 50
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 50, io mem 0xfebff800
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 10 ports detected
>usb 2-1: USB disconnect, address 2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:12.0: version 2.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 58
>usb 6-9: new high speed USB device using ehci_hcd and address 3
>usb 6-9: configuration #1 chosen from 1 choice
>ohci_hcd 0000:00:13.1: wakeup
>usb 2-1: new full speed USB device using ohci_hcd and address 3
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: 64bit ncq ilck led clo pmp pio 
>ata1: SATA max UDMA/133 cmd 0xDC84CD00 ctl 0x0 bmdma 0x0 irq 58
>ata2: SATA max UDMA/133 cmd 0xDC84CD80 ctl 0x0 bmdma 0x0 irq 58
>ata3: SATA max UDMA/133 cmd 0xDC84CE00 ctl 0x0 bmdma 0x0 irq 58
>ata4: SATA max UDMA/133 cmd 0xDC84CE80 ctl 0x0 bmdma 0x0 irq 58
>scsi0 : ahci
>usb 2-1: configuration #1 chosen from 1 choice
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 1)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi2 : ahci
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>  Vendor: ATA       Model: WDC WD1200BEVS-0  Rev: 01.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: Attached scsi disk sda
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1200545707.374:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1587 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49762 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1200545707.766:3): policy loaded auid=4294967295
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new driver hci_usb
>hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>input: PC Speaker as /class/input/input2
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt 0000:08:07.0[A] -> GSI 20 (level, low) -> IRQ 66
>eth0: RealTek RTL8139 at 0xdc916c00, 00:1a:92:d6:68:0d, IRQ 66
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>sdhci: Secure Digital Host Controller Interface driver, 0.12
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:08:01.2 [1180:0822] (rev 17)
>ACPI: PCI Interrupt 0000:08:01.2[C] -> GSI 23 (level, low) -> IRQ 74
>mmc0: SDHCI at 0xfeaff400 irq 74 DMA
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 217
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: AC Adapter [AC0] (on-line)
>Asus Laptop ACPI Extras version 0.30
>  BSTS called, 0x7f returned
>  unsupported model T12Rg-H, trying default values
>  send /proc/acpi/dsdt to the developers
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: ec object not found
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>Adding 1052216k swap on /dev/sda5.  Priority:-1 extents:1 across:1052216k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>audit(1200545739.251:4): audit_pid=2117 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ohci_hcd 0000:00:13.3: wakeup
>usb 4-1: new low speed USB device using ohci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Optical Mouse as /class/input/input3
>input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:13.3-1
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>hda-intel: Invalid position buffer, using LPIB read method instead.
>oprofile: using NMI interrupt.
>eth0: link down
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>eth0: no IPv6 routers present
>usb 2-1: USB disconnect, address 3
>ohci_hcd 0000:00:13.1: wakeup
>usb 2-1: new full speed USB device using ohci_hcd and address 4
>usb 2-1: configuration #1 chosen from 1 choice
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>usb 2-1: USB disconnect, address 4
>ohci_hcd 0000:00:13.1: wakeup
>usb 2-1: new full speed USB device using ohci_hcd and address 5
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: USB disconnect, address 5
>

Actions: View

Attachments on bug 429106: 291983 | 291984