Attachment 292058 Details for Bug 308861 – dmesg

dmesg

dmesg.txt (text/plain), 23.77 KB, created by my_linux on 2008-01-17 20:09:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: my_linux

Created: 2008-01-17 20:09:33 UTC

Size: 23.77 KB

patch

obsolete

>Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:18:33 EDT 2007
>Command line: ro root=LABEL=/1 nolapic
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000006ff50000 (usable)
> BIOS-e820: 000000006ff50000 - 000000006ff65000 (ACPI data)
> BIOS-e820: 000000006ff65000 - 000000006ff66000 (ACPI NVS)
> BIOS-e820: 000000006ff66000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 458576) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F7CA0, 0024 (r2 ACRSYS)
>ACPI: XSDT 6FF5E351, 005C (r1 ACRSYS ACRPRDCT  6040000  LTP        0)
>ACPI: SLIC 6FF64ACE, 0176 (r1 ACRSYS ACRPRDCT  6040000 LOHR        0)
>ACPI: FACP 6FF64C44, 00F4 (r3 NVIDIA MCP67-M   6040000 PTL_    F4240)
>ACPI: DSDT 6FF5E3AD, 66AD (r1 NVIDIA    MCP67  6040000 MSFT  3000000)
>ACPI: FACS 6FF65FC0, 0040
>ACPI: SSDT 6FF64D38, 01C4 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ACPI: MCFG 6FF64EFC, 003C (r1 Nvidia NVDAACPI  6040000 NVDA        0)
>ACPI: HPET 6FF64F38, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
>ACPI: APIC 6FF64F70, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT 6FF64FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>Scanning NUMA topology in Northbridge 24
>CPU has 2 num_cores
>No NUMA configuration found
>Faking a node at 0000000000000000-000000006ff50000
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 458576) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000006ff50000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      158
>    0:      256 ->   458576
>On node 0 totalpages: 458478
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1315 pages reserved
>  DMA zone: 2627 pages, LIFO batch:0
>  DMA32 zone: 6213 pages used for memmap
>  DMA32 zone: 448267 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: HPET id: 0x10de8201 base: 0xfed00000
>Intel MultiProcessor Specification v1.4
>MPTABLE: OEM ID: nVIDIA   MPTABLE: Product ID: MCP67-NB     MPTABLE: APIC at: 0xFEE00000
>Processor #0 (Bootup-CPU)
>Processor #1
>I/O APIC #2 at 0xFEC00000.
>Setting APIC routing to flat
>Processors: 2
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
>swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 450894
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/1 nolapic
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>hpet clockevent registered
>TSC calibrated against HPET
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1700.225 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>CPU 0: aperture @ 6c44000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 1800128k/1834304k available (2441k kernel code, 33784k reserved, 1378k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3403.12 BogoMIPS (lpj=1701560)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0ca0)
>ExtINT not setup in hardware but reported by MP table
>Using local APIC timer interrupts.
>APIC timer calibration result 12501667
>Detected 12.501 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3400.34 BogoMIPS (lpj=1700170)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
>AMD C1E detected late. Force timer broadcast.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2064 bytes
>Time: 19:37:45  Date: 01/17/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:08.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 10 11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LGPU] (IRQs 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSI0] (IRQs *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [Z00N] (IRQs 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [Z00O] (IRQs 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 10 *11 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>Time: hpet clocksource has been installed.
>Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
>Could not switch to high resolution mode on CPU 1
> lapic is not functional.
>Could not switch to high resolution mode on CPU 0
>pnp: 00:07: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
>pnp: 00:0a: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:0a: ioport range 0x1400-0x147f has been reserved
>pnp: 00:0a: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:0a: ioport range 0x1800-0x187f has been reserved
>pnp: 00:0a: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved
>pnp: 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
>pnp: 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved
>PCI: Bridge: 0000:00:08.0
>  IO window: disabled.
>  MEM window: f2300000-f23fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0c.0
>  IO window: 4000-4fff
>  MEM window: f2000000-f21fffff
>  PREFETCH window: f2800000-f29fffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: disabled.
>  MEM window: f2200000-f22fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs...<6>Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
>Could not switch to high resolution mode on CPU 1
> lapic is not functional.
>Could not switch to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 3166k freed
>Simple Boot Flag at 0x36 set to 0x80
>audit: initializing netlink socket (disabled)
>audit(1200598665.666:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 2B02AABF702ECCF9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:12.0
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (thermal-0470): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
>ACPI: Thermal Zone [THRM] (55 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 processors (2 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0x9 (1700 MHz), vid 0x13
>powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x14
>powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x1a
>  Magic number: 8:841:647
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 7 (level, low) -> IRQ 7
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 7, io mem 0xf2689000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z00O] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:04.1 to 64
>ehci_hcd 0000:00:04.1: EHCI Host Controller
>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:04.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:04.1
>ehci_hcd 0000:00:04.1: irq 11, io mem 0xf2689400
>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 5 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.0: irq 11, io mem 0xf2686000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 5 ports detected
>ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z00N] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>ohci_hcd 0000:00:04.0: OHCI Host Controller
>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:04.0: irq 10, io mem 0xf2687000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 5 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:09.0: version 2.3
>ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 5 (level, low) -> IRQ 5
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
>ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc20000ac0100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
>ata2: SATA max UDMA/133 cmd 0xffffc20000ac0180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
>ata3: SATA max UDMA/133 cmd 0xffffc20000ac0200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
>ata4: SATA max UDMA/133 cmd 0xffffc20000ac0280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1200598672.918:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  8 users, 11 roles, 2317 types, 112 bools, 1 sens, 1024 cats
>security:  67 classes, 207815 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1200598673.235:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>ACPI: AC Adapter [ACAD] (off-line)
>ACPI: Battery Slot [BAT1] (battery present)
>pata_amd 0000:00:06.0: version 0.3.9
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000130c0 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000130c8 irq 15
>ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ata5.00: configured for UDMA/33
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK4E] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>phy0: Selected rate control algorithm 'simple'
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>ath_pci 0000:05:00.0: AR5212 chip found: mac 14.14 phy 7.0
>sdhci: SDHCI controller found at 0000:01:04.1 [1180:0822] (rev 22)
>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:04.1[B] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
>mmc0: SDHCI at 0xf2300800 irq 11 DMA
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 01025:0126 bound to 0000:00:0a.0
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>firewire_ohci: Added fw-ohci device 0000:01:04.0, OHCI version 1.0
>firewire_ohci:     Isochronous I/O is not yet implemented for OHCI 1.0 chips.
>firewire_ohci:     Cameras, audio devices etc. won't work on this controller with this driver version.
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1574360k swap on /dev/sda3.  Priority:-1 extents:1 across:1574360k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1200598685.244:4): audit_pid=1658 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Clocksource tsc unstable (delta = -168613314 ns)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>unable to reset hardware: -22
>ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 10 (level, low) -> IRQ 10
>unable to reset hardware: -22
>usb 2-2: new high speed USB device using ehci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 6:0:0:0: Direct-Access     Crucial  Gizmo! secure    2.00 PQ: 0 ANSI: 2
>sd 6:0:0:0: [sdb] 3996160 512-byte hardware sectors (2046 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
>sd 6:0:0:0: [sdb] 3996160 512-byte hardware sectors (2046 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1 sdb2
>sd 6:0:0:0: [sdb] Attached SCSI removable disk
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>SELinux: initialized (dev sdb2, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 308861: 291902 | 291903 | 291904 | 292058