Attachment 292274 Details for Bug 426478 – contents of /var/log/dmesg for kernel 2.6.23.1-49.fc8

contents of /var/log/dmesg for kernel 2.6.23.1-49.fc8

dmesg-2.6.23.1-49.fc8.txt (text/plain), 26.32 KB, created by Andrea Santilli on 2008-01-19 21:41:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrea Santilli

Created: 2008-01-19 21:41:57 UTC

Size: 26.32 KB

patch

obsolete

>Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 21:41:26 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
> BIOS-e820: 000000007fe80000 - 000000007ff00000 (ACPI NVS)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6480
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 523904) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523904
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   523904
>On node 0 totalpages: 523904
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292227 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F63D0, 0014 (r0 ACRSYS)
>ACPI: RSDT 7FE8521F, 0058 (r1 ACRSYS ACRPRDCT  6040000  LTP        0)
>ACPI: FACP 7FE8CC76, 0074 (r1 Acer   Grape     6040000 LOHR       5A)
>ACPI: DSDT 7FE86F48, 5D2E (r1 Acer   CALISTGA  6040000 INTL 20050228)
>ACPI: FACS 7FE8DFC0, 0040
>ACPI: APIC 7FE8CCEA, 0068 (r1 Acer   Grape     6040000 LOHR       5A)
>ACPI: HPET 7FE8CD52, 0038 (r1 Acer   Grape     6040000 LOHR       5A)
>ACPI: MCFG 7FE8CD8A, 003C (r1 Acer   Grape     6040000 LOHR       5A)
>ACPI: SLIC 7FE8CDC6, 0176 (r1 ACRSYS ACRPRDCT  6040000 LOHR        0)
>ACPI: DBGP 7FE8CF3C, 0034 (r1 Acer   Grape     6040000 LOHR        0)
>ACPI: APIC 7FE8CF70, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT 7FE8CFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SSDT 7FE868F9, 064F (r1 SataRe  SataPri     1000 INTL 20050228)
>ACPI: SSDT 7FE86267, 0692 (r1 SataRe  SataSec     1000 INTL 20050228)
>ACPI: SSDT 7FE85803, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050228)
>ACPI: SSDT 7FE8575D, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050228)
>ACPI: SSDT 7FE85277, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050228)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 519811
>Kernel command line: ro root=LABEL=/ rhgb quiet init=/sbin/bootchartd
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1662.560 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2069652k/2095616k available (2184k kernel code, 24628k reserved, 1116k data, 280k init, 1178112k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622165 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622165   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3328.73 BogoMIPS (lpj=1664369)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3325.04 BogoMIPS (lpj=1662520)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
>Total of 2 processors activated (6653.77 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>APIC calibration not consistent with PM Timer: 190ms instead of 100ms
>APIC delta adjusted to PM-Timer: 1039060 (1984590)
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 22:12:53  Date: 01/19/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd603, last bus=7
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: If "acpi_osi=Linux" works better,
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
>PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: d0000000-d1ffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: d2100000-d21fffff
>  PREFETCH window: disabled.
>PCI: Bus 7, cardbus bridge: 0000:06:04.0
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: d2000000-d20fffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 2905k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1200780772.789:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key D5E5FC8EDCF186B6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7FE85FA9, 01F6 (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
>ACPI: SSDT 7FE85A62, 04C2 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FE8619F, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
>ACPI: SSDT 7FE85F24, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ00] (53 C)
>ACPI: Thermal Zone [TZ01] (53 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:06:04.0 [1025:0090]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>cs: IO port probe 0x2000-0x2fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>Marking TSC unstable due to: TSC halts in idle.
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Time: hpet clocksource has been installed.
>Using IPI No-Shortcut mode
>  Magic number: 8:897:249
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 845k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd2404000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x000050a0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>usb 1-4: new high speed USB device using ehci_hcd and address 2
>input: AT Translated Set 2 keyboard as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-4: configuration #1 chosen from 1 choice
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00015440 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00015448 irq 15
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>usb 4-1: configuration #1 chosen from 1 choice
>input: HID 062a:0000 as /class/input/input3
>input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.2-1
>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PP02 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1200780779.184:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PWRB]
>input: PC Speaker as /class/input/input8
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: AC Adapter [ACAD] (on-line)
>Linux video capture interface: v2.00
>ACPI: WMI: Interface device found
>ACPI: WMI: Mapper loaded
>intel_rng: FWH not detected
>ACPI: Battery Slot [BAT1] (battery present)
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/gspca_core.c: USB GSPCA camera found.(VC0321) 
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/gspca_core.c: [spca5xx_probe:4098] Camera type YUYV 
>input: Video Bus as /class/input/input9
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input10
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
>PCI: Enabling device 0000:06:04.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:06:04.2 to 64
>mmc0: SDHCI at 0xd2003400 irq 17 DMA
>sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1)
>PCI: Enabling device 0000:06:04.4 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 17 (level, low) -> IRQ 17
>mmc1: SDHCI at 0xd2003100 irq 17 PIO
>ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:06:01.0 to 64
>ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:b0:a3:1a
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/Vimicro/vc032x.h: [vc032x_probe_sensor:137] check sensor header 44
>usb 1-4: USB disconnect, address 2
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/Vimicro/vc032x.h: [vc032x_read_sensor_register:104]  I2c Bus Busy Wait  0 
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/Vimicro/vc032x.h: [vc032x_read_sensor_register:104]  I2c Bus Busy Wait  0 
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/Vimicro/vc032x.h: [vc032x_read_sensor_register:104]  I2c Bus Busy Wait  0 
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/Vimicro/vc032x.h: [vc0321_config:350] Unknown sensor...
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/gspca_core.c: Failed to configure camera
>gspca: probe of 1-4:1.0 failed with error -5
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.19kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>nvidia: module license 'NVIDIA' taints kernel.
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.01  Wed Sep  5 19:12:23 PDT 2007
>usb 1-4: configuration #1 chosen from 1 choice
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/gspca_core.c: USB GSPCA camera found.(VC0321) 
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/gspca_core.c: [spca5xx_probe:4098] Camera type YUYV 
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/Vimicro/vc032x.h: [vc032x_probe_sensor:137] check sensor header 44
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/Vimicro/vc032x.h: [vc0321_config:359] Find Sensor PO3130NC
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/gspca_core.c: [spca5xx_getcapability:1215] maxw 640 maxh 480 minw 176 minh 144
>usbcore: registered new interface driver gspca
>/builddir/build/BUILD/gspca-kmod-1.00.18/_kmod_build_2.6.23.1-49.fc8/gspca_core.c: gspca driver 01.00.18 registered
>Clocksource tsc unstable (delta = -67337810 ns)
>acer_acpi: Acer Laptop ACPI Extras version 0.10.0
>acer_acpi: Detected Acer WMID interface
>Registered led device: acer_acpi:mail
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>fuse init (API version 7.8)
>Adding 2096440k swap on /dev/sda5.  Priority:-1 extents:1 across:2096440k

Actions: View

Attachments on bug 426478: 292274 | 292275 | 294419