Attachment 292861 Details for Bug 390531 – dmesg dump

dmesg dump

dmesg.lst (text/plain), 20.29 KB, created by Ryan Ayers on 2008-01-24 21:30:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ryan Ayers

Created: 2008-01-24 21:30:24 UTC

Size: 20.29 KB

patch

obsolete

>Linux version 2.6.23.9-85.fc8 (root@ryan) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Jan 11 14:01:34 CST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 261936) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   261936
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   261936
>On node 0 totalpages: 261936
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 254 pages used for memmap
>  HighMem zone: 32306 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FAD70, 0021 (r2 ACPIAM)
>ACPI: XSDT 3FF30100, 003C (r1 A M I  OEMXSDT   3000422 MSFT       97)
>ACPI: FACP 3FF30290, 00F4 (r3 A M I  OEMFACP   3000422 MSFT       97)
>ACPI: DSDT 3FF303F0, 36A7 (r1  PPVM1 PPVM1904      904 INTL  2002026)
>ACPI: FACS 3FF40000, 0040
>ACPI: APIC 3FF30390, 005C (r1 A M I  OEMAPIC   3000422 MSFT       97)
>ACPI: OEMB 3FF40040, 003F (r1 A M I  OEMBIOS   3000422 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
>swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 259890
>Kernel command line: ro root=LABEL=/ rhgb
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2793.041 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1030548k/1047744k available (2184k kernel code, 16448k reserved, 1116k data, 280k init, 130240k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc06222f5 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc06222f5   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 5588.78 BogoMIPS (lpj=2794393)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000041d 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5585.23 BogoMIPS (lpj=2792615)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000041d 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
>Total of 2 processors activated (11174.01 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:17:41  Date: 01/24/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  06, should be F9 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
>pnp: 00:0a: ioport range 0x290-0x297 has been reserved
>pnp: 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
>pnp: 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0d: iomem range 0x100000-0x3ffeffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fc900000-fe9fffff
>  PREFETCH window: d7f00000-f7efffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2934k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1201209461.512:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 534EF053496440DC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 8:719:298
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfebffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ef00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ef20
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ef40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000ef80
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
>usb 2-1: configuration #1 chosen from 1 choice
>ata2.00: ATAPI: SONY    CD-RW  CRX230ED, 4YS1, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 1:0:0:0: CD-ROM            SONY     CD-RW  CRX230ED  4YS1 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x0001efe0 ctl 0x0001efae bmdma 0x0001ef60 irq 19
>ata4: SATA max UDMA/133 cmd 0x0001efa0 ctl 0x0001efaa bmdma 0x0001ef68 irq 19
>ata3.00: ATA-6: ST380013AS, 3.18, max UDMA/133
>ata3.00: 156301488 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST380013AS       3.18 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 2:0:0:0: [sda] Attached SCSI disk
>hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:806.q8.D USB FW:q8] on usb-0000:00:1d.0-1
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 20
>i91u: PCI Base=0xD800, IRQ=20, BIOS=0xFF000, SCSI ID=7
>i91u: Reset SCSI Bus ... 
>BUG: soft lockup - CPU#1 stuck for 11s! [insmod:468]
>
>Pid: 468, comm:               insmod
>EIP: 0060:[<f885c085>] CPU: 1
>EIP is at initio_reset_scsi+0x4b/0x61 [initio]
> EFLAGS: 00200206    Not tainted  (2.6.23.9-85.fc8 #1)
>EAX: fffba880 EBX: 0000d800 ECX: c19342bc EDX: fffba970
>ESI: 0000000a EDI: c193ff00 EBP: 0000d854 DS: 007b ES: 007b FS: 00d8
>CR0: 8005003b CR2: 001e74c0 CR3: 37cbc000 CR4: 000006d0
>DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
>DR6: ffff0ff0 DR7: 00000400
> [<f885e465>] initio_probe_one+0x4f7/0x63a [initio]
> [<c04ba899>] sysfs_create_link+0xf2/0x149
> [<c05003cb>] pci_device_probe+0x36/0x57
> [<c0566f93>] driver_probe_device+0xea/0x168
> [<c04f3561>] kobject_uevent_env+0x37a/0x3a1
> [<c05670b7>] __driver_attach+0x0/0xa5
> [<c0567127>] __driver_attach+0x70/0xa5
> [<c056651f>] bus_for_each_dev+0x39/0x5b
> [<c0566dee>] driver_attach+0x16/0x18
> [<c05670b7>] __driver_attach+0x0/0xa5
> [<c0566803>] bus_add_driver+0x6d/0x16d
> [<c05004fa>] __pci_register_driver+0x48/0x74
> [<c044ab86>] sys_init_module+0x150d/0x1651
> [<c0620652>] do_page_fault+0x2c0/0x5ef
> [<c0432662>] __request_region+0x0/0xb0
> [<c04935c0>] mntput_no_expire+0x11/0x6a
> [<c040518a>] syscall_call+0x7/0xb
> =======================
>scsi4 : Initio INI-9X00U/UW SCSI device driver
>scsi: waiting for bus probes to complete ...
>scsi 4:0:11:0: Sequential-Access QUANTUM  SDLT320          5252 PQ: 0 ANSI: 2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1201209480.744:2): selinux=0 auid=4294967295
>scsi 1:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>scsi 4:0:11:0: Attached scsi generic sg2 type 1
>sr0: scsi3-mmc drive: 97x/52x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: PC Speaker as /class/input/input3
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>st: Version 20070203, fixed bufsize 32768, s/g segs 256
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 21
>st 4:0:11:0: Attached scsi tape st0
>st 4:0:11:0: st0: try direct i/o: yes (alignment 512 B)
>e100: eth0: e100_probe: addr 0xfeaff000, irq 21, MAC addr 00:11:2F:28:B6:21
>nvidia: module license 'NVIDIA' taints kernel.
>osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>NVRM: loading NVIDIA UNIX x86 Kernel Module  169.07  Thu Dec 13 18:42:56 PST 2007
>st0: Block limits 4 - 16777212 bytes.
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50224 usecs
>intel8x0: clocking to 48000
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 3911816k swap on /dev/sda2.  Priority:-1 extents:1 across:3911816k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 390531: 263581 | 265281 | 292820 | 292861