Attachment 293021 Details for Bug 380991 – dmesg.out

dmesg.out

dmesg.out (text/plain), 34.05 KB, created by Ryan Schlesinger on 2008-01-25 23:25:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ryan Schlesinger

Created: 2008-01-25 23:25:55 UTC

Size: 34.05 KB

patch

obsolete

>Linux version 2.6.23.14-107.fc8 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Mon Jan 14 21:37:30 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f0e7000 (usable)
> BIOS-e820: 000000007f0e7000 - 000000007f2e8000 (ACPI NVS)
> BIOS-e820: 000000007f2e8000 - 000000007febe000 (ACPI data)
> BIOS-e820: 000000007febe000 - 000000007feef000 (ACPI NVS)
> BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>1136MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 520423) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   520423
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   520423
>On node 0 totalpages: 520423
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2273 pages used for memmap
>  HighMem zone: 288774 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FE020, 0024 (r2 APPLE )
>ACPI: XSDT 7FEFD1C0, 0074 (r1 APPLE   Apple00       A5       1000013)
>ACPI: FACP 7FEFB000, 00F4 (r3 APPLE   Apple00       A5 Loki       5F)
>ACPI: DSDT 7FEF0000, 48BD (r1 APPLE  MacBookP    20001 INTL 20050309)
>ACPI: FACS 7FEC0000, 0040
>ACPI: HPET 7FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: APIC 7FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: MCFG 7FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: ASF! 7FEF7000, 00A0 (r32 APPLE   Apple00        1 Loki       5F)
>ACPI: SBST 7FEF6000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: ECDT 7FEF5000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: SSDT 7FEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309)
>ACPI: SSDT 7FEBD000, 064F (r1 SataRe  SataPri     1000 INTL 20050309)
>ACPI: SSDT 7FEBC000, 069C (r1 SataRe  SataSec     1000 INTL 20050309)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 516358
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2327.530 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2055892k/2081692k available (2185k kernel code, 24592k reserved, 1116k data, 280k init, 1164188k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc062250d - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc062250d   (2185 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4659.10 BogoMIPS (lpj=2329553)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU         T7600  @ 2.33GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4655.02 BogoMIPS (lpj=2327511)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7600  @ 2.33GHz stepping 06
>Total of 2 processors activated (9314.12 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 13:03:47  Date: 01/25/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: If "acpi_osi=Linux" works better,
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>pnp: 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 3000-3fff
>  MEM window: 98300000-983fffff
>  PREFETCH window: 80000000-8fffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: 98200000-982fffff
>  PREFETCH window: 98500000-985fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 98100000-981fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: 1000-1fff
>  MEM window: 94100000-980fffff
>  PREFETCH window: 90000000-93ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 94000000-940fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2962k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1201266227.421:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 75B2EDBADB2FF0B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7FEB8A90, 02F0 (r1 APPLE   Cpu0Ist     3000 INTL 20050309)
>ACPI: SSDT 7FEB6C10, 02A0 (r1 APPLE   Cpu0Cst     3001 INTL 20050309)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FEB7F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309)
>ACPI: SSDT 7FEB6F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: No controller found.
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>Marking TSC unstable due to: TSC halts in idle.
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 8:737:79
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 845k
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0x98405400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004080
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004060
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140b0 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140b8 irq 15
>ata1.00: ATAPI: MATSHITADVD-R   UJ-85J, FAV1, max UDMA/66
>usb 1-4: new high speed USB device using ehci_hcd and address 5
>usb 1-4: configuration #1 chosen from 1 choice
>ata1.00: configured for UDMA/66
>scsi 0:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-85J   FAV1 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x000140c8 ctl 0x000140e6 bmdma 0x000140a0 irq 20
>ata4: SATA max UDMA/133 cmd 0x000140c0 ctl 0x000140e2 bmdma 0x000140a8 irq 20
>ata3.01: ATA-8: Hitachi HTS722020K9SA00, DC4OC54P, max UDMA/133
>ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.01: configured for UDMA/133
>scsi 2:0:1:0: Direct-Access     ATA      Hitachi HTS72202 DC4O PQ: 0 ANSI: 5
>sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 2:0:1:0: [sda] Write Protect is off
>sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 2:0:1:0: [sda] Write Protect is off
>sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 2:0:1:0: [sda] Attached SCSI disk
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-2: new full speed USB device using uhci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input1
>input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
>input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input2
>input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input3
>input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.1-1
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input4
>input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.1-1
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>hiddev96: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>input: HID 05ac:1000 as /class/input/input5
>input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
>input: HID 05ac:1000 as /class/input/input6
>input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
>usb 5-2: new low speed USB device using uhci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input7
>input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1201266232.840:2): selinux=0 auid=4294967295
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:1:0: Attached scsi generic sg1 type 0
>usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317
>usbcore: registered new interface driver usblp
>input: Power Button (FF) as /class/input/input8
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input9
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /class/input/input10
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input11
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: AC Adapter [ADP1] (on-line)
>input: Video Bus as /class/input/input12
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: Battery Slot [BAT0] (battery present)
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20
>appletouch Geyser 3 inited.
>input: appletouch as /class/input/input13
>usbcore: registered new interface driver appletouch
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>sky2 0000:02:00.0: v1.18 addr 0x98200000 irq 16 Yukon-EC (0xb6) rev 2
>sky2 eth0: addr 00:16:cb:a1:32:5d
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ath5k_pci 0000:03:00.0: registered as 'phy0'
>ath5k phy0: Device not yet supported.
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 20
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
>[fglrx] Maximum main memory to use for locked dma buffers: 1884 MBytes.
>[fglrx] ASYNCIO init succeed!
>[fglrx] PAT is enabled successfully!
>[fglrx] module loaded - fglrx 8.45.4 [Jan 16 2008] on minor 0
>input: PC Speaker as /class/input/input14
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: STAC922x, Apple subsys_id=106b1a00
>firewire_core: created new fw device fw0 (0 config rom retries, S800)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>appletouch: incomplete data package (first byte: 2, length: 4).
>Clocksource tsc unstable (delta = -281112346 ns)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>fuse init (API version 7.8)
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1201295054.145:3): audit_pid=2265 old=0 by auid=4294967295
>/dev/vmmon[2297]: VMCI: Driver initialized.
>/dev/vmmon[2297]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2297]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[2297]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[2297]: Module vmmon: initialized
>/dev/vmnet: open called by PID 2367 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 2383 (vmnet-dhcpd)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2394 (vmnet-dhcpd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2399 (vmnet-natd)
>/dev/vmnet: port on hub 8 successfully opened
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>sky2 eth0: disabling interface
>bridge-eth0: disabling the bridge
>bridge-eth0: down
>/dev/vmnet: open called by PID 2765 (vmnet-netifup)
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2845 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>ndiswrapper version 1.51 loaded (smp=yes, preempt=no)
>ndiswrapper: driver net5416 (,08/28/2006,6.0.1.75) loaded
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ndiswrapper: using IRQ 17
>wlan0: ethernet device 00:17:f2:e7:46:69 using serialized NDIS driver: net5416, version: 0x60000, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:0024.5.conf
>wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
>usbcore: registered new interface driver ndiswrapper
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ndiswrapper (iw_set_bitrate:442): setting bit rate failed (C0010017)
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[fglrx] PCIe has already been initialized. Reinitializing ...
>[fglrx] Reserve Block - 0 offset =  0Xfffb000 length = 0X5000
>[fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
>[fglrx] Reserve Block - 2 offset =  0Xffbb000 length = 0X40000
>[fglrx] interrupt source 20008000 successfully enabled
>[fglrx] enable ID = 0x00000008
>[fglrx] Receive enable interrupt message with irqEnableMask: 20008000
>[fglrx] interrupt source 10000000 successfully enabled
>[fglrx] enable ID = 0x00000009
>[fglrx] Receive enable interrupt message with irqEnableMask: 10000000
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>vmnet8: no IPv6 routers present
>vmnet1: no IPv6 routers present
>eth0: no IPv6 routers present
>eth0: no IPv6 routers present
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3861]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmnet: open called by PID 3861 (vmware-vmx)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmmon[3865]: host clock rate change request 0 -> 19
>/dev/vmmon[3865]: host clock rate change request 19 -> 83
>[fglrx:firegl_free_mutex] *ERROR* mutex id 0x00000005 not found in mutex list
>[fglrx:firegl_free_mutex] *ERROR* mutex id 0x00000006 not found in mutex list
>[fglrx:firegl_free_mutex] *ERROR* mutex id 0x00000006 not found in mutex list
>[fglrx:firegl_free_mutex] *ERROR* mutex id 0x00000006 not found in mutex list

Actions: View

Attachments on bug 380991: 257431 | 293020 | 293021