Attachment 293175 Details for Bug 430521 – dmesg-undocked.txt

dmesg-undocked.txt

dmesg-undocked.txt (text/plain), 32.81 KB, created by Warren Togami on 2008-01-28 18:18:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Warren Togami

Created: 2008-01-28 18:18:41 UTC

Size: 32.81 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24-2.fc9 (mockbuild@) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-36)) #1 SMP Fri Jan 25 13:14:54 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
> BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
> BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>118MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6b90
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 259712) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   259712
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   259712
>On node 0 totalpages: 259712
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 414 pages used for memmap
>  HighMem zone: 29922 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6AC0, 0024 (r2 PTLTD )
>ACPI: XSDT 3F68B835, 0084 (r1   Sony     VAIO  6040000 PTL         0)
>ACPI: FACP 3F691C06, 00F4 (r3   Sony     VAIO 20061204 PTL         1)
>ACPI: DSDT 3F68C6E1, 54A1 (r1   Sony     VAIO 20061204 PTL  20050624)
>ACPI: FACS 3F692FC0, 0040
>ACPI: APIC 3F691CFA, 0068 (r1   Sony     VAIO 20061204 PTL        5A)
>ACPI: HPET 3F691D62, 0038 (r1   Sony     VAIO 20061204 PTL        5A)
>ACPI: MCFG 3F691D9A, 003C (r1   Sony     VAIO 20061204 PTL        5A)
>ACPI: TCPA 3F691DD6, 0032 (r1   Sony     VAIO 20061204 PTL      5A52)
>ACPI: SLIC 3F691E08, 0176 (r1   Sony     VAIO 20061204 PTL   1000000)
>ACPI: APIC 3F691F7E, 005A (r1   Sony     VAIO 20061204 PTL         0)
>ACPI: BOOT 3F691FD8, 0028 (r1   Sony     VAIO 20061204 PTL         1)
>ACPI: SSDT 3F68C4EB, 01F6 (r1   Sony     VAIO 20061204 PTL  20050624)
>ACPI: SSDT 3F68BFFE, 04ED (r1   Sony     VAIO 20061204 PTL  20050624)
>ACPI: SSDT 3F68BD9F, 025F (r1   Sony     VAIO 20061204 PTL  20050624)
>ACPI: SSDT 3F68B8B9, 04E6 (r1   Sony     VAIO 20061204 PTL  20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: DMI detected: Sony
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
>swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256162
>Kernel command line: initrd=initrd0.img root=UUID=3931-02D7 rootfstype=vfat ro quiet liveimg rhgb  BOOT_IMAGE=vmlinuz0 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0826000 soft=c0806000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1330.038 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1011632k/1038848k available (2313k kernel code, 26572k reserved, 1196k data, 576k init, 121344k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0773000 - 0xc0803000   ( 576 kB)
>      .data : 0xc064275d - 0xc076d924   (1196 kB)
>      .text : 0xc0400000 - 0xc064275d   (2313 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 2665.65 BogoMIPS (lpj=1332829)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM) Solo CPU     U1500  @ 1.33GHz stepping 0c
>Total of 1 processors activated (2665.65 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3552 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>khelper used greatest stack depth: 2928 bytes left
>net_namespace: 80 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  7:57:26  Date: 01/28/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xfddef, last bus=8
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored via DMI
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>khelper used greatest stack depth: 2852 bytes left
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
>system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
>system 00:06: ioport range 0x680-0x6ff has been reserved
>system 00:06: ioport range 0x800-0x80f has been reserved
>system 00:06: ioport range 0x1000-0x107f has been reserved
>system 00:06: ioport range 0x1180-0x11bf has been reserved
>system 00:06: ioport range 0x1640-0x164f has been reserved
>system 00:06: ioport range 0xfe00-0xfe01 has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: f2000000-f3ffffff
>  PREFETCH window: f0000000-f1ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: f4000000-f40fffff
>  PREFETCH window: disabled.
>PCI: Bus 8, cardbus bridge: 0000:07:04.0
>  IO window: 00001400-000014ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: 54000000-57ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: f4100000-f41fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:07:04.0[A] -> GSI 20 (level, low) -> IRQ 18
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 4155k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1201507047.498:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>khelper used greatest stack depth: 2772 bytes left
>khelper used greatest stack depth: 2724 bytes left
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>khelper used greatest stack depth: 2548 bytes left
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [ATF0] (55 C)
>ACPI: Thermal Zone [DTS0] (52 C)
>ACPI: Thermal Zone [DTS1] (52 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:07:04.0 [104d:8203]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:07:04.0, mfunc 0x01a21b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#07) from #08 to #0b
>pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>input: DualPoint Stick as /devices/virtual/input/input2
>input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input3
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:256:977
>Freeing unused kernel memory: 576k freed
>Write protecting the kernel read-only data: 925k
>mount used greatest stack depth: 2496 bytes left
>SCSI subsystem initialized
>Driver 'sr' needs updating - please use bus_type methods
>loop: module loaded
>udevd used greatest stack depth: 2484 bytes left
>udevtrigger used greatest stack depth: 2164 bytes left
>udevd used greatest stack depth: 2028 bytes left
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>modprobe used greatest stack depth: 1772 bytes left
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf4544000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>ACPI: PCI Interrupt 0000:07:04.1[B] -> GSI 21 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:07:04.1, OHCI version 1.10
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata1.00: ATA-5: MCBOE32GQMPQ, 2.2.00, max UDMA/66
>ata1.00: 63963136 sectors, multi 16: LBA 
>ata1.00: limited to UDMA/33 due to 40-wire cable
>ata1.00: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      MCBOE32GQMPQ     2.2. PQ: 0 ANSI: 5
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 63963136 512-byte hardware sectors (32749 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 63963136 512-byte hardware sectors (32749 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>modprobe used greatest stack depth: 1620 bytes left
>usb 5-1: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>Clocksource tsc unstable (delta = -286333941 ns)
>usb 5-6: new high speed USB device using ehci_hcd and address 5
>usb 5-6: configuration #1 chosen from 1 choice
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>usb 2-1: configuration #1 chosen from 1 choice
>input: GUNZE USB Touch Panel as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input4
>input,hidraw0: USB HID v1.10 Mouse [GUNZE USB Touch Panel] on usb-0000:00:1d.1-1
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  2.18 PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdb] 2006673 512-byte hardware sectors (1027 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 2006673 512-byte hardware sectors (1027 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>mount used greatest stack depth: 1528 bytes left
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>squashfs: version 3.3 (2007/10/31) Phillip Lougher
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1201507060.645:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:157127
>SELinux:8192 avtab hash slots allocated.Num of rules:157127
>security:  8 users, 12 roles, 2150 types, 106 bools, 1 sens, 1024 cats
>security:  67 classes, 157127 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=264368
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=262255
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=262254
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=249640
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1201507062.346:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>sky2 0000:06:00.0: v1.20 addr 0xf4000000 irq 17 Yukon-FE (0xb7) rev 1
>sky2 eth0: addr 00:13:a9:8f:3b:46
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>input: Power Button (CM) as /devices/virtual/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>sony-laptop: Sony Programmable IO Control Driver v0.5.
>sony-laptop: detected Type3 model
>input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/SNY6001:00/input/input7
>input: Sony Vaio Jogdial as /devices/virtual/input/input8
>sony-laptop: device allocated minor is 62
>sony-laptop: Sony Notebook Control Driver v0.5.
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>ACPI: AC Adapter [ACAD] (off-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:727: codec_mask = 0x1
>ALSA sound/pci/hda/hda_codec.c:2165: hda_codec: model 'hippo' is selected for config 104d:8203 (Sony UX-90)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>input: PC Speaker as /devices/platform/pcspkr/input/input9
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ACPI: PCI Interrupt 0000:07:04.2[C] -> GSI 22 (level, low) -> IRQ 22
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>audit(1201525102.458:4): audit_pid=2585 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.11.0 20071122 on minor 0
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>eth0: no IPv6 routers present
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x2, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x6, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x2, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x7, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x7, stream=0x0, channel=0, format=0x0
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
>sky2 eth0: Link is down.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Actions: View

Attachments on bug 430521: 293174 | 293175