Attachment 293574 Details for Bug 431038 – kernel 2.6.24-7, shows first call trace after ifdown, second after ifup

kernel 2.6.24-7, shows first call trace after ifdown, second after ifup

dmesg-eth0-ifup-2.6.24-7.txt (text/plain), 37.93 KB, created by Andrew Farris on 2008-01-31 12:17:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Farris

Created: 2008-01-31 12:17:40 UTC

Size: 37.93 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24-7.fc9 (mockbuild@) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-36)) #1 SMP Mon Jan 28 20:16:56 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff77000 (usable)
> BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS)
> BIOS-e820: 000000003ff79000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262007) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262007
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262007
>On node 0 totalpages: 262007
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 446 pages used for memmap
>  HighMem zone: 32185 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FD560, 0014 (r0 DELL  )
>ACPI: RSDT 000FD574, 0034 (r1 DELL    WS 340         8 ASL        61)
>ACPI: FACP 000FD5A8, 0074 (r1 DELL    WS 340         8 ASL        61)
>ACPI: DSDT FFFE3C22, 23AD (r1   DELL    dt_ex     1000 MSFT  100000D)
>ACPI: FACS 3FF77000, 0040
>ACPI: SSDT FFFE61C6, 0096 (r1   DELL    st_ex     1000 MSFT  100000D)
>ACPI: APIC 000FD61C, 005C (r1 DELL    WS 340         8 ASL        61)
>ACPI: BOOT 000FD678, 0028 (r1 DELL    WS 340         8 ASL        61)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258425
>Kernel command line: ro root=LABEL=/ rhgb quiet vga=792
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0827000 soft=c0807000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1994.080 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1022220k/1048028k available (2317k kernel code, 25048k reserved, 1197k data, 576k init, 130524k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0774000 - 0xc0804000   ( 576 kB)
>      .data : 0xc06434ed - 0xc076e924   (1197 kB)
>      .text : 0xc0400000 - 0xc06434ed   (2317 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3993.21 BogoMIPS (lpj=1996607)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: 3febf3ff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
>Total of 1 processors activated (3993.21 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3552 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>khelper used greatest stack depth: 2928 bytes left
>net_namespace: 80 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  3:49:35  Date: 01/31/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbe5e, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>khelper used greatest stack depth: 2880 bytes left
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0x100000-0xffffff could not be reserved
>system 00:00: iomem range 0x1000000-0x3ff76fff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
>system 00:09: ioport range 0x800-0x85f has been reserved
>system 00:09: ioport range 0xc00-0xc7f has been reserved
>system 00:09: ioport range 0x860-0x8ff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fc000000-fdffffff
>  PREFETCH window: f0000000-f7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: fe100000-fe2fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2574k freed
>khelper used greatest stack depth: 2792 bytes left
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1201751374.920:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 6144k, total 131072k
>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>vesafb: protected mode interface info at c000:e4c0
>vesafb: pmi: set display start = c00ce4f6, set palette = c00ce560
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>fbcon: VESA VGA (fb0) is primary device
>Switched to high resolution mode on CPU 0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>khelper used greatest stack depth: 2788 bytes left
>agpgart: Detected an Intel i850 Chipset.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>khelper used greatest stack depth: 2744 bytes left
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:401:817
>Freeing unused kernel memory: 576k freed
>Write protecting the kernel read-only data: 925k
>ACPI: PCI Interrupt 0000:02:07.2[C] -> GSI 18 (level, low) -> IRQ 16
>ehci_hcd 0000:02:07.2: EHCI Host Controller
>ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:02:07.2: irq 16, io mem 0xfe1fdc00
>ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>modprobe used greatest stack depth: 1792 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 17
>ohci_hcd 0000:02:07.0: OHCI Host Controller
>ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:02:07.0: irq 17, io mem 0xfe1ff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>usb 1-4: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:02:07.1[B] -> GSI 17 (level, low) -> IRQ 18
>ohci_hcd 0000:02:07.1: OHCI Host Controller
>ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:02:07.1: irq 18, io mem 0xfe1fe000
>usb 1-4: configuration #1 chosen from 1 choice
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>modprobe used greatest stack depth: 1784 bytes left
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ff80
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1f.4: irq 20, io base 0x0000ff60
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>modprobe used greatest stack depth: 1780 bytes left
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>usb 4-1: configuration #1 chosen from 1 choice
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1f.2/usb4/4-1/4-1:1.0/input/input1
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1f.2-1
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1f.2/usb4/4-1/4-1:1.1/input/input2
>input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1f.2-1
>ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
>ata1.00: 78165360 sectors, multi 8: LBA 
>ata1.01: ATA-5: ST340016A, 3.75, max UDMA/100
>ata1.01: 78165360 sectors, multi 8: LBA 
>usb 4-2: new full speed USB device using uhci_hcd and address 3
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>usb 4-2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1f.2/usb4/4-2/4-2:1.0/input/input3
>input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1f.2-2
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1f.2/usb4/4-2/4-2:1.1/input/input4
>input,hiddev96,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1f.2-2
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB03, max UDMA/33
>ata2.01: ATAPI: LITE-ON LTR-24102M, 4DS3, max UDMA/33
>usb 5-1: not running at top speed; connect to a high speed hub
>usb 5-1: configuration #1 chosen from 1 choice
>hub 5-1:1.0: USB hub found
>hub 5-1:1.0: 4 ports detected
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST340016A        3.75 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>usb 5-2: new low speed USB device using uhci_hcd and address 3
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      ST340016A        3.75 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
>sd 0:0:1:0: [sdb] Attached SCSI disk
>usb 5-2: configuration #1 chosen from 1 choice
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB03 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            LITE-ON  LTR-24102M       4DS3 PQ: 0 ANSI: 5
>modprobe used greatest stack depth: 744 bytes left
>hiddev97hidraw4: USB HID v1.10 Device [APC Back-UPS ES 500 FW:824.B1.D USB FW:B1] on usb-0000:00:1f.4-2
>usb 5-1.1: new low speed USB device using uhci_hcd and address 4
>usb 5-1.1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1f.4/usb5/5-1/5-1.1/5-1.1:1.0/input/input5
>input,hidraw5: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1f.4-1.1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1201751388.352:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:157858
>SELinux:8192 avtab hash slots allocated.Num of rules:157858
>security:  8 users, 12 roles, 2158 types, 106 bools, 1 sens, 1024 cats
>security:  67 classes, 157858 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1201751391.593:3): policy loaded auid=4294967295
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sr 1:0:0:0: Attached scsi generic sg2 type 5
>sr 1:0:1:0: Attached scsi generic sg3 type 5
>input: Power Button (FF) as /devices/virtual/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input7
>ACPI: Power Button (CM) [VBTN]
>nvidia: module license 'NVIDIA' taints kernel.
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>iTCO_vendor_support: vendor-support=0
>Linux Tulip driver version 1.1.15 (Feb 27, 2007)
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 19 (level, low) -> IRQ 19
>tulip0:  MII transceiver #1 config 1000 status 786d advertising 01e1.
>eth0: ADMtek Comet rev 17 at MMIO 0xfe1fd800, 00:04:5a:7d:9f:01, IRQ 19.
>gameport: EMU10K1 is pci0000:02:09.1/gameport0, io 0xecd8, speed 978kHz
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>ACPI: PCI Interrupt 0000:02:09.2[B] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:02:09.2, OHCI version 1.10
>ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 18 (level, low) -> IRQ 16
>3c59x: Donald Becker and others.
>0000:02:0c.0: 3Com PCI 3c905C Tornado at f8f78c00.
>Intel 82802 RNG detected
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 18
>phy0: Selected rate control algorithm 'pid'
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>firewire_core: created new fw device fw1 (0 config rom retries, S400)
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>NVRM: loading NVIDIA UNIX x86 Kernel Module  169.09  Fri Jan 11 14:38:28 PST 2008
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>FDC 0 is a post-1991 82077
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>ALSA sound/pci/ac97/ac97_codec.c:2869: ac97 quirk for Dell (1028:010d)
>intel8x0_measure_ac97_clock: measured 50957 usecs
>intel8x0: measured clock 78 rejected
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 16
>ALSA sound/pci/emu10k1/emu10k1_main.c:1671: vendor=0x1102, device=0x4, subsystem_vendor_id=0x511102, subsystem_id=0x51
>ALSA sound/pci/emu10k1/emu10k1_main.c:1696: Sound card name=Audigy 1 [SB0090]
>usbcore: registered new interface driver snd-usb-audio
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     External AL25744_12345678      PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdc] 976773169 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 1a 0c 00 00
>sd 2:0:0:0: [sdc] Assuming drive cache: write through
>sd 2:0:0:0: [sdc] 976773169 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 1a 0c 00 00
>sd 2:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg4 type 0
>scsi3 : SBP-2 IEEE-1394
>firewire_sbp2: logged in to fw1.0 LUN 0000 (0 retries)
>scsi 3:0:0:0: Direct-Access-RBC Maxtor 6 L120P0                PQ: 0 ANSI: 4
>sd 3:0:0:0: [sdd] 240121728 512-byte hardware sectors (122942 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 11 00 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 240121728 512-byte hardware sectors (122942 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 11 00 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2 sdd3
>sd 3:0:0:0: [sdd] Attached SCSI disk
>sd 3:0:0:0: Attached scsi generic sg5 type 14
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>EXT3 FS on sdb3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb6, type ext3), uses xattr
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem sdb2
>Ending clean XFS mount for filesystem: sdb2
>SELinux: initialized (dev sdb2, type xfs), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev sdd3, type vfat), uses mountpoint labeling
>fuse init (API version 7.9)
>SELinux: initialized (dev sdd2, type fuseblk), uses genfs_contexts
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdd1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdd1, type ext3), uses xattr
>SELinux: initialized (dev sdc1, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Adding 2867560k swap on /dev/sdb5.  Priority:-1 extents:1 across:2867560k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>0000:02:0a.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
>eth0: Setting full-duplex based on MII#1 link partner capability of cde1.
>eth1:  setting full-duplex.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>audit(1201751440.899:4): audit_pid=2376 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>eth0: no IPv6 routers present
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth1: no IPv6 routers present
>NET: Registered protocol family 5
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized nouveau 0.0.10 20060213 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Allocating FIFO number 0
>[drm] nouveau_fifo_alloc: initialised FIFO 0
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
>[drm] nouveau_fifo_free: freeing fifo 1
>[drm] nouveau_fifo_free: freeing fifo 0
>DROP INPUT IN=eth0 OUT= MAC=00:04:5a:7d:9f:01:00:06:25:08:81:1c:08:00 SRC=121.201.96.2 DST=192.168.1.10 LEN=40 TOS=0x00 PREC=0x00 TTL=45 ID=33951 PROTO=TCP SPT=80 DPT=6882 WINDOW=1400 RES=0x00 ACK URGP=0 
>DROP INPUT IN=eth0 OUT= MAC=00:04:5a:7d:9f:01:00:06:25:08:81:1c:08:00 SRC=121.201.96.2 DST=192.168.1.10 LEN=40 TOS=0x00 PREC=0x00 TTL=45 ID=8981 PROTO=TCP SPT=80 DPT=6882 WINDOW=1400 RES=0x00 ACK URGP=0 
>DROP INPUT IN=eth0 OUT= MAC=00:04:5a:7d:9f:01:00:06:25:08:81:1c:08:00 SRC=121.201.96.2 DST=192.168.1.10 LEN=40 TOS=0x00 PREC=0x00 TTL=45 ID=41315 PROTO=TCP SPT=80 DPT=6882 WINDOW=1400 RES=0x00 ACK URGP=0 
>DROP INPUT IN=eth0 OUT= MAC=00:04:5a:7d:9f:01:00:06:25:08:81:1c:08:00 SRC=121.201.96.2 DST=192.168.1.10 LEN=40 TOS=0x00 PREC=0x00 TTL=45 ID=732 PROTO=TCP SPT=80 DPT=6882 WINDOW=1400 RES=0x00 ACK URGP=0 
>DROP INPUT IN=eth0 OUT= MAC=00:04:5a:7d:9f:01:00:06:25:08:81:1c:08:00 SRC=121.201.96.2 DST=192.168.1.10 LEN=40 TOS=0x00 PREC=0x00 TTL=45 ID=60962 PROTO=TCP SPT=80 DPT=6882 WINDOW=1400 RES=0x00 ACK URGP=0 
>DROP INPUT IN=eth0 OUT= MAC=00:04:5a:7d:9f:01:00:06:25:08:81:1c:08:00 SRC=121.201.96.2 DST=192.168.1.10 LEN=40 TOS=0x00 PREC=0x00 TTL=45 ID=56631 PROTO=TCP SPT=80 DPT=6882 WINDOW=1400 RES=0x00 ACK URGP=0 
>usb 1-4: USB disconnect, address 2
>warning: process `/usr/sbin/syste' used the deprecated sysctl system call with 1.23.
>0000:02:0a.0: tulip_stop_rxtx() failed (CSR5 0xfc06c012 CSR6 0xff970111)
>=============================================================================
>BUG kmalloc-2048 (Tainted: P       ): Poison overwritten
>-----------------------------------------------------------------------------
>
>INFO: 0xc4211070-0xc42110e7. First byte 0x0 instead of 0x6b
>INFO: Allocated in tulip_refill_rx+0x44/0xf6 [tulip] age=133525 cpu=0 pid=0
>INFO: Freed in skb_release_data+0x82/0x87 age=55 cpu=0 pid=17125
>INFO: Slab 0xc10e7380 used=1 fp=0xc4211060 flags=0x400040c3
>INFO: Object 0xc4211060 @offset=4192 fp=0xc4210830
>
>Bytes b4 0xc4211050:  84 0a 00 00 9a d1 b4 01 5a 5a 5a 5a 5a 5a 5a 5a .....Ñ´.ZZZZZZZZ
>  Object 0xc4211060:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
>  Object 0xc4211070:  00 04 5a 7d 9f 01 00 06 25 08 81 1c 08 00 45 00 ..Z}....%.....E.
>  Object 0xc4211080:  00 5f 2d b7 00 00 73 11 65 03 d5 08 1e 19 c0 a8 ._-·..s.e.Õ...À¨
>  Object 0xc4211090:  01 0a cf 9c 1a e2 00 4b 6a b4 64 31 3a 61 64 32 ..Ï..â.Kj´d1:ad2
>  Object 0xc42110a0:  3a 69 64 32 30 3a 28 ff 45 e7 ab 37 e0 1e 41 f2 :id20:(ÿEç«7à.Aò
>  Object 0xc42110b0:  0a 74 3d 1d 70 fe ae 52 bc 43 65 31 3a 71 34 3a .t=.pþ®R¼Ce1:q4:
>  Object 0xc42110c0:  70 69 6e 67 31 3a 74 34 3a 3e 04 00 00 31 3a 76 ping1:t4:>...1:v
>  Object 0xc42110d0:  34 3a 55 54 1f f3 31 3a 79 31 3a 71 65 9f 18 42 4:UT.ó1:y1:qe..B
> Redzone 0xc4211860:  bb bb bb bb                                     »»»»            
> Padding 0xc4211888:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ        
>Pid: 13966, comm: Xorg Tainted: P        2.6.24-7.fc9 #1
> [<c04064b6>] show_trace_log_lvl+0x1a/0x2f
> [<c0406ce2>] show_trace+0x12/0x14
> [<c0407002>] dump_stack+0x6c/0x72
> [<c048d6b6>] print_trailer+0x110/0x118
> [<c048d74a>] check_bytes_and_report+0x8c/0xab
> [<c048d9a5>] check_object+0xc9/0x1be
> [<c048e7aa>] __slab_alloc+0x43b/0x45e
> [<c048f478>] __kmalloc_track_caller+0x91/0xff
> [<c05d27d4>] __alloc_skb+0x4f/0xfd
> [<c05cee43>] sock_alloc_send_skb+0x7c/0x1af
> [<c0635761>] unix_stream_sendmsg+0x151/0x2f3
> [<c05cc9a3>] sock_aio_write+0xe8/0xf4
> [<c0492361>] do_sync_readv_writev+0xab/0xe8
> [<c0492a68>] do_readv_writev+0xb0/0x178
> [<c0492b6f>] vfs_writev+0x3f/0x4b
> [<c0493027>] sys_writev+0x3d/0x8f
> [<c040526e>] syscall_call+0x7/0xb
> =======================
>FIX kmalloc-2048: Restoring 0xc4211070-0xc42110e7=0x6b
>
>FIX kmalloc-2048: Marking all objects used
>BUG: unable to handle kernel NULL pointer dereference at virtual address 00000098
>printing eip: f8f889d8 *pde = 19b10067 *pte = 00000000 
>Oops: 0000 [#1] SMP 
>Modules linked in: nouveau drm appletalk rfcomm l2cap bluetooth autofs4 sunrpc ipt_REJECT ipt_LOG xt_limit nf_conntrack_ipv4 iptable_filter ip_tables xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6t_REJECT ip6table_filter ip6_tables x_tables ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi ipv6 fuse vfat fat xfs dm_mirror dm_multipath dm_mod firewire_sbp2 snd_usb_audio snd_usb_lib snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul dcdbas snd_emu10k1 floppy snd_rawmidi pcspkr snd_intel8x0 snd_seq_dummy serio_raw snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq arc4 ecb blkcipher snd_pcm_oss i2c_i801 snd_mixer_oss snd_pcm snd_seq_device rt2500pci snd_timer rt2x00pci rt2x00lib snd_page_alloc rfkill snd_util_mem joydev input_polldev intel_rng snd_hwdep 3c59x mac80211 firewire_ohci iTCO_wdt emu10k1_gp snd tulip iTCO_vendor_support cfg80211 firewire_core mii crc_itu_t eeprom_93cx6 gameport usb_storage soundcore nvidia(P) i2c_core button sg sr_mod cdrom pata_acpi ata_piix ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 18206, comm: ip Tainted: P        (2.6.24-7.fc9 #1)
>EIP: 0060:[<f8f889d8>] EFLAGS: 00010006 CPU: 0
>EIP is at tulip_interrupt+0x306/0xbba [tulip]
>EAX: f58c6500 EBX: 00000000 ECX: 0001c0d0 EDX: f58c6500
>ESI: 00000069 EDI: 00000690 EBP: f0d06afc ESP: f0d06a90
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process ip (pid: 18206, ti=f0d06000 task=de98ae10 task.ti=f0d06000)
>Stack: 00000000 00000001 d9bb9280 c15a1078 c076b43c f0d06ad4 c048e6fd f8ebe828 
>       f58c6000 f58c6500 f8ebe800 fc69c0d0 00000000 00000000 00000000 00000019 
>       c1e598f0 006d6afc 00000000 0000007f f58c6500 0000006d 00000020 c076b43c 
>Call Trace:
> [<c04064b6>] show_trace_log_lvl+0x1a/0x2f
> [<c0406566>] show_stack_log_lvl+0x9b/0xa3
> [<c0406615>] show_registers+0xa7/0x178
> [<c040681b>] die+0x135/0x220
> [<c0641963>] do_page_fault+0x553/0x631
> [<c063ffea>] error_code+0x72/0x78
> [<c0468627>] request_irq+0xc1/0x112
> [<f8f8b392>] tulip_open+0x24/0x1ac [tulip]
> [<c05d8dc1>] dev_open+0x45/0x7b
> [<c05d79ef>] dev_change_flags+0xa4/0x152
> [<c05df119>] do_setlink+0x25e/0x317
> [<c05e065b>] rtnl_newlink+0x246/0x3a3
> [<c05e0014>] rtnetlink_rcv_msg+0x19a/0x1b4
> [<c05ed27c>] netlink_rcv_skb+0x30/0x82
> [<c05dfe72>] rtnetlink_rcv+0x17/0x1f
> [<c05ed050>] netlink_unicast+0x19c/0x205
> [<c05ed87d>] netlink_sendmsg+0x279/0x285
> [<c05cd0b0>] sock_sendmsg+0xe0/0xfd
> [<c05cd21e>] sys_sendmsg+0x151/0x1af
> [<c05ce2ed>] sys_socketcall+0x220/0x241
> [<c040526e>] syscall_call+0x7/0xb
> =======================
>Code: 3b 83 9c 00 00 00 76 0f 8b 55 e8 89 d8 b9 bf 89 f8 f8 e8 c4 88 64 c7 f0 83 04 24 00 e9 a4 00 00 00 8b 45 e4 8b 9c f0 18 01 00 00 <8b> 93 98 00 00 00 89 55 d4 83 7b 54 00 74 04 0f 0b eb fe 0f bf 
>EIP: [<f8f889d8>] tulip_interrupt+0x306/0xbba [tulip] SS:ESP 0068:f0d06a90
>---[ end trace 68f88df58c2c2f80 ]---

Actions: View

Attachments on bug 431038: 293570 | 293571 | 293572 | 293574 | 295760 | 298138 | 299658